How to Apply Tight Skim Coat Over Drywall Patch

VideoJoeShows
86 followers
48 Video Views·Apr 18, 2026
https://www.youtube.com/user/VideoJoeShows
How to apply a tight skim coat over a drywall patch is what this howto video is about. Is a tight skim coat different than just a skim coat? Yes. Make sure to use all purpose joint compound for your skim coat & tight skim coats. At least that's what VideoJoe uses. Installing & applying a tight skim coat is easy...when you know how. Watch & learn as VideoJoeShows you how he applies a tight skim coat to a drywall patch.
https://www.youtube.com/user/VideoJoeShows
Let's see what we can do with this tight skim material. Let's just get it on here.
That's what it's called, tight skim, because we're not putting very much on here at all.
Just a thin layer, you know, there's hardly anything on there.
Looks like I need to put a little bit more along that edge.
That's why it's good to use a wider knife. If I did that with a six inch, I'd have to do this
bit and then this bit, and pretty soon you can't get a nice flat area, you know, as easily.
Okay, I can bridge it over just a hair further and up just a hair further.
A little bit more right in there. Okay, you want to overdo your patch.
See that? That's how you want to do it. Each time you put that mud on, you want to wipe off
the excess. You got a nice clean blade edge to work with. Oh man, that is really smooth.
Good job. Okay, once that dries, you've got to let that dry all the way, and you'll know when
it's dry. Then you can do a light dusting with your paddle sander again, all the way around
the edges. And the important thing to remember when you're using a paddle sander, you only want
to do it a little bit and blend it in. You don't want to sand with this too much, thinking I'm
going to sand and sand and sand and get it really super good. The more sanding I do, the better it's
going to be. Wrong. Because what you're going to do is you're going to sand this layer off,
you're going to start going into the next layer of all-purpose mud, and you could get down to the
Kwik Set. That's the last thing you want to do. You're taking all your material off that you've
already built up, that you've invested your time and putting on the wall to make this nice and
smooth. Okay, so be careful when you're sanding. This patch is looking excellent. I haven't sanded
this yet, and if you're wondering, after you put the tight skin material on here, how long is it
going to take to dry? Well, it won't take very long because you're just putting a very, very thin
dusting layer of sheetrock mud on there, so it's not going to take as long
as the first coat of all-purpose mud that you put over the Kwik Set, okay?
So if you've got any questions, make sure it's all dry, that it blends into the existing, and you
should see where it's drying and stuff. If you've got any questions about it, let it go a little bit
longer. The last thing you want to do is start sanding this before it's 100% dry, okay? It's
the worst thing you can do because if you start balling up the top or scuffing it up,
now you're going to have to put some more mud on there.
