Another way to apply a skim coat to a wall

VideoJoeKnows
63 followers
2 Video Views·May 11, 2026
http://www.VideoJoeKnows.com Another way to apply a skim coat....to a wall...is easy....when you know how. Just use a sheetrock pan & a 10" broadknife to apply the skim coat to a wall...right?....there IS no other way........or is there? You remember "joe" says there's always at least 2 ways to do something? Same goes for applying a skim coat to a sheetrock wall. You may never have heard of this way to apply a skim coat to a wall, but it works great! Let's watch as "joe" shows another different way to apply a skim coat to a wall.
http://www.VideoJoeKnows.com
AI Generated·May contain errors
Video Summary
AI Generated<html> <head><title>404 Not Found</title></head> <body> <center><h1>404 Not Found</h1></center> <hr><center>nginx</center> </body> </html>
Say what?
How are we gonna put that sheetrock mud on the wall using that?
Well, there's a very good easy
Explanation for that. What do you mean? We can't do that
I've never put that on with that sheetrock on there with the paint roller. Are you crazy?
No, I'm not crazy I'll show you how to do this now just hold tight, okay
Have you ever used a roller
Believe it or not. This is gonna work good. This is just a standard
9-inch roller cover on a paint roller frame and
It's just like a half-inch nap. You don't need something really super thick
And there's a couple different ways to do this. I mean you can just dip it in halfway
Get this out of the way
And you're just gonna start rolling it on there
The roller actually spreads it out
You don't have to get it down all the way because we'll I'll show you how we're gonna get that down there
Okay, just want a nice even coverage wherever you think you need more
Add a little more
Not hard
Use be a painter
You're painting now
What could be easier than this?
You say?
Okay, slap it on there
And you're just what you're doing is you're just kind of pushing it where you need it
Okay
now
I'm just gonna set that off to the side
There's different things that we can use but I'm just gonna use my trowel again
You can use your trowels take it off
What I'm gonna do now is I'm gonna grab it above the bottom
I got a little bit now I can go down to the bottom and finish it off
Just like I would if I had doing that with the Hawking trowel
Okay
Got my pan wipe that excess right off on the pan
Clean up the very bottom edge
Now if you have a nice consistency like that
Try it taking one pass all the way up
There we are
one pass from there
You can start at the bottom and come all the way up
Now if you see some spots where you need it now, you can put it on there
You may or may not have to do any more passes than that, but that's pretty good right there
But I'm gonna make it a little better than that
I'm just gonna take another pass. I've got everything nice and cleaned off here nice firm
Continuous stroke there there
So I didn't take off much lead, but I took just enough
To make it nice
And smooth lots more smoother than it was before
There you think about that
You
