How to skim coat over existing spray textured drywall

VideoJoeKnows
63 followers
2 Video Views·May 30, 2026
http://www.VideoJoeKnows.com How to skim coat over existing spray textured drywall is something every home owner should know. You don't need to call a pro in to skim coat your existing spray textured drywall when you can do it yourself......if you know how....there's a lot of money to be saved here! Skimming over spray textured drywall, with a few coats of skimming material, is fun & easy to do, when you know how....& gives you a great workout....what could be better? Watch as "joe" shows you how to skim coat over existing spray texture on drywall.
http://www.VideoJoeKnows.com
AI Generated·May contain errors
Now I'm up a little bit higher. I can go up this way just a little bit more.
Not very much more, but a little bit for me helps. Put it in at an angle. See I can go up
just about to there. So that's what I want to do. There. Wipe the edges. See there?
I wipe that off. I start from the bottom still and come up nice and easy. Wipe that off.
Nice and easy up. Wipe that off. There we go. Okay now from the top down. I got to rearrange
some of my mud in here. I want all my mud towards the middle of the pan. I don't want it to the
edges. So I have some at the edges and I can just rearrange that in my pan. And on the other end I
can do the same thing. Okay now I've got all my mud kind of from here to here. So I can take a
bite of it at a time and wipe it on there. But as I go I'm going to get to the far right first
into the corner. So I'm going to build up on the left hand edge of my knife.
Okay something like that. Now I can get in the corner and come on down.
Grab a little bit more on the edge. Regular I wouldn't have enough on the edge there. See
so that's easy to get the edge and lightly go over it again. Now I can grab more in the middle
wipe off the edges and start from the top down. Now if you want you can keep moving and we can
go back and do this however you want to do. Wipe off those edges now from the top down.
It looks kind of easy but the further you come down here the more you have to push really hard
on there and it gets to your wrist after a while. So there's only so much I can do over my head at
time. But as you saw I didn't have to do too much of the wall up over my head. Just this top section
everything else I'm working from the bottom up. I have way more control that way plus it
puts the pressure off my off my wrist. Okay wipe off the edges. I'm not too concerned just yet
how smooth it is. I'm just getting the material on. There's some extra there I can go sideways
wipe that off grab the tip like that and put a little more on there. Now it's important to
keep your knife edge pretty clean as you get ready to wipe this off even the back side sometimes you
get a little bit on there you don't want that getting into your material. Okay now light
touchdown just light wipe that off light touch I got my finger back here just so I can
I'm almost touching the wall but not all the way I got to keep it at an angle
now you can see where you got to wipe a little bit harder but the key is you don't want to wipe
too much of this off you just put it on obviously you don't want a big bubble here but you don't
want to wipe so hard that you can see all the ridges of this of the spray texture existing
spray texture wall coming through the idea is we're covering this okay we're still going to
have to go over it again with the next coat but this is your fill coat pretty much the next coat
we won't be using it as a fill as much because most of this is already going to be done right
we're going to use that next coat to basically smooth this top coat or this first coat out
okay you don't want to play with this too much I'm just putting a little bit right there
the more you play with it the more you'll see there's lines now you got to go over it again
if you go over it keep wiping off the edges okay you gently go over that
once it looks okay you're done this is the first coat
