Repairing A Destroyed Speaker Cone - 1931 Atwater Kent Radio

Amateur Repair Time
257 followers
829 Video Views·Apr 12, 2026
Check out our Patreon page, for all of our channels. Contains outakes, concise arcade repair tips, bloopers, repair FAILS, Audio youtube wouldn't allow us to upload, and much more!
https://patreon.com/JoesClassicVideoGames
------------------------------------------------------------------------------------
Ladies and gentlemen, welcome back to Amateur Repair Time. We've been working on this Atwater
Kent model 72 console radio for quite a while now and I've been doing videos about every little part
of the steps as I go through of the journey. So the first video we took the radio apart,
looked at the chassis, kind of saw how it was designed. We did a video where we took the
sardine cans apart that are the capacitors, like the coupling capacitors and bypass capacitors,
stuff like that, and disassembled that, replaced all of that. We did a video where we worked on the
power filter capacitors, which was a whole thing. If you missed that, you missed a good one.
We did a video where we worked on all of the resistors and everything in it. We did a video
where we worked on the power transformer. It's got a replacement power transformer in it.
Figured all of that out. We did a video where we tested all the tubes and worked through all
of the tubes and now we are up to one of kind of my most dreaded ones that I haven't really
been looking forward to doing, but we're going to do it. The speaker. So I bought this cabinet
for about $50 somewhere here in town or in Rockville or something. And I got to tell you,
these old radios, the console ones like this, one I really like the thing, but
financially it's just not a good thing. It doesn't work out for you. And I knew it wasn't going to
whenever I bought it, but so I bought it for 50 bucks, which is a good deal, but it was missing
the speaker. And it's a specific field coil speaker. So, I mean, you can't just put anything
in there. You, you've got to kind of track down what's supposed to be in there, or at least that's
what I've chosen to do. So you got a little significant, pretty significant expense on that.
And then, you know, you got to buy caps for it. You got to buy resistors for it. You got to buy
tubes for it sometimes, depending on what it needs. And so I've been thinking about it and
I'm going to end up in this thing, about 200 bucks, something like that. And it, but a lot
of time spent on it. And when it's all said and done, if I tried to sell it, I would be lucky to
get $300 out of it. I don't, I don't even know if you could pull that off. I might be able to,
right? Because you got a couple of problems with it. One, the, if a collector is looking at it,
they're not going to pay anything for this particular model because it's a really common
model. It's not, it's not a really desirable one. There's nothing wrong with it or anything,
but they just made a ton of them and there's nothing special about it. I like it. And,
you know, I'm working on it on purpose because I like it and I want to keep it in my collection.
So there's that. So collectors aren't going to buy it. And then if, if a, someone who was a
collector or a radio guy or girl, they know how to fix them. So they would just buy one of the
ones that you can find for 50 bucks. They're not going to pay extra money for one that somebody
else has repaired really. So then if you try to sell it to the, kind of the casual market,
people that aren't collectors or that, that don't repair radios, well, they're going to see,
you know, there's a lot of them online that don't work for 50 bucks. And then this one's 300 and it
works. It doesn't necessarily sound like a great deal, you know? And, they're all going to want
like the Bluetooth crap, you know, the ones that have just been turned into a, a light,
an LED bulb and a Bluetooth little thing from China about that big. And, you know,
you can do that with a $50 one. So, so it's a, it's a hard sell. You're not going to make money
buying these and trying to flip them, which isn't what I'm doing. I'm just working on them because
I like them. So with that said, I bought a speaker for it. Now this is just a generic box of another
speaker, but this is what it was shipped to me in. I got this on eBay. It's kind of a strange
experience. I'll go ahead and say what happened. I am not saying this to denigrate anybody or
anything like that. So I bought this speaker on eBay and the, the guy just didn't ship it. So
about three weeks went by, which is fine, whatever. Let him figure out what he's doing.
I mean, he's shipping a heavy antique speaker and it needs to be done pretty well. So I didn't even
email him. I mean, I bought it and paid for it. About three weeks went by and he emailed me back.
Well, and then he said, this is the first I've heard from the guy. And he says, well,
eBay is telling me that I'm, you know, today's the last day I can ship that speaker. And I didn't
even get it yet. So I got to, uh, I can't do that. Uh, what do you think? Uh, we just cancel
the auction and then you can rebuy it and, uh, to start the clock over again. Well, normally I
wouldn't necessarily be in a good mood to do that, but I was like, well, yeah, why not? Who cares?
It's not that big of a deal. And you know, I'm working through the thing takes a while.
And, um, so the guy cancels the auction and, uh, it refunds me my money. And then I saw that it
was back on eBay. So I just immediately bought it back. So he emailed me and he said, I'll email
you whenever it goes back up, but it had already went back up and I had already bought it again.
And, um, so then a little while goes back and he emails a little while ago goes by and he emails
me and says, uh, Oh, they relisted it already. I didn't want to do it quite that quick. Well,
I'll see what I can do. And then he tells me that it's in storage and he has to go get it
out of storage. Now this guy has good feedback and he sold a bunch of speakers, you know,
in the past. So I was pretty confident that the guy would be able to ship it to me in one piece.
You can see that he did a pretty good job packaging it up. It appears I haven't opened it yet. Um,
and so, um, he tells me that he's going to go pick it up Thursday. He'll mail it Friday,
whatever. Okay. I'm no big hurry. And so, um, he emails me Thursday. Well, and the whole thing was,
the thing was in almost perfect shape. It had, uh, had a little crack in it that someone had
put a little glue on, um, but it's in pretty good shape. And, um, I think he said it was tested
working. I think we'll see. Um, and, um, so he emails me back, man, I just stuck my finger right
through the paper cone of this speaker. It's like, damn, this is, this ain't working out too great,
but you kind of, I kind of need a specific speaker for this one. So I said, well, okay,
man, just send it to me. I'm probably going to, I was going to repair that little,
little tiny rip in it anyway. So now I guess I'll repair the finger poke hole in it. We'll
see how bad it is. I'm going to repair it one way or another, but we'll see how bad it is.
So he shipped it to me and it finally got here and it's boxed up pretty well. So we'll see.
Now I have another, it's a model N speaker for Atwater Kent. So it was in several of their,
their, uh, radios, their 70 series radios. And I'll show you when we pull it out, why you,
I kind of wanted to get the actual original one instead of trying to make something else work.
I've got another one that I took out of another console. That's a 70. So this is a 72. The other
one's a 70. And I think I've got two seventies and one of them had a speaker in it too. So I
pulled it out, brought it home. It's pretty rough. We're going to look at it too. So what I'm going
to do is we're going to repair this one and then we're going to repair the other one. That's like
one of the worst. It's ripped into a million pieces. Now the best way to do it is to re-cone
it, but I'm not going to re-cone it. I'm going to try to repair the cone. Um, and then we'll,
we'll just test the two. So we'll have the one hopefully with minimal repairs, unless this thing
is much worse than I think it's going to be with minimal repairs. And then we'll have the other
one that's been completely repaired. And then whenever we get the radio up and going, we'll
try both of them and, uh, see what the difference in the sound is. So that's basically what we're
going to do in this video. So let me unpack it and hopefully the thing made it here in one piece.
So the guy was bragging that he was going to pack it right. He's going to pack it right.
And he was saying this in the ad, um, you know, before I bought it. I mean, he did
go all the way with it and the shipping charge wasn't that crazy either. All right. So let me
pull it out. All right. So this, I think this ended up costing me $81 shipped with tax and everything.
So I mentioned before there is a, uh, I said it was a ham fest, but there's a radio show coming up
actually this weekend that you're watching this video in Charlotte. Um, the wireless association,
I think is the name of the group that puts it on. It's been going on for 50 years in Charlotte
and they're, um, they're having their show this weekend. I'm gonna go over there
and apparently you can get some really good deals on parts and stuff. So maybe I'll go over there
and see if they've got one too, because like I said, I've got three of these, I've got this 72
and then I've got two seventies. And to be honest, I really liked these at water Kent.
So I might end up getting more. Oh, I've got a 36 as well, which is a, um, like one of the
bread box type kind of ones, um, that uses the separate power supply and the separate speaker
that sits on top of it or beside it. It uses a model E speaker and I don't have the power supply.
I think it's a type Y power supply. I think it's called. Um, so I need a type Y power supply
for a at water Kent model 36 and I need a type E speaker. It can be a E one, two or three.
So I'm gonna see what I can get that at the, uh, at the show. Let me get the rest of this.
So it's very heavily wrapped. I mean, he had bubble wrap all over it. He's trying to get
it here in one piece. Look, he put cardboard around the end of the cone there. Let's see.
I'm just wanting to know how bad is the paper ripped? He didn't show me any pictures. I didn't
ask for him. I just said, yeah, go ahead and send it. I mean, basically I liked the price
and I already had the one part I was going to have to repair anyway. So I said, well,
you know, I'm going to repair it anyway. Send it on and we'll repair it. He's got tape everywhere.
All right. Well, it must not be too big. He also put a piece of cardboard on the front of it
to protect it. So, you know, I think the guy did a pretty good job. So let me take it the
rest of the way out and then we'll lean it up where we can see. So I think that may be what
he's talking about that he put his hand through. Uh, Hmm. That's yeah. To be honest, I don't know
what that is. I mean, it's not the, you know, I figured it was through the cone. I don't even
know if that's important for the sound. Um, Hmm. That's interesting. I'll have to do some research
to even see what that's doing. That might just be to shield the inside there from dust or
something. That might just be like a dust cover. You wouldn't even see that. Um, that's the top
of it. Here's the, um, little hooks that hang it in there. I mean, that can easily be repaired.
We're going to repair it with glue anyway. So it's not a big deal. Would you look at that?
I completely misunderstood the guy and I saw pictures of it. He showed a rip in the, um,
in the listing, but the rips not in the cone, the rips in whatever that in pieces,
which I don't think is really even important. Look at that. That's pretty incredible.
This thing's almost a hundred years old now, just so everybody knows I am not an audiophile. So I
know what you're all there. Oh, you do this, do that. I'm not doing a damn thing. I'm putting
it back exactly how it was originally. Um, I'm putting it back. I'm just using it like this.
I'm not reconing it just for the sake of reconing it. It's that's kind of complex.
Yes, it can be done, but, um, wait till you see the other one I've got. Holy crap. Compared to
this one, that's about the nicest cone. I think you could expect for a vintage speaker. Look how
nice these things are made to get the, just the construction of it. And this too, I can't believe
this. I thought he said that the cord was damaged, but he must mean something very minor.
My other cord definitely damaged. I thought he even said that maybe it was repaired.
Maybe he was just being very picky about the description. I don't know. I mean, that's
nothing. Look at that. I mean, that's, that's unbelievably nice condition for its age. Now
we've got to figure out about the part where he put his finger through it. Um, but yeah,
I'm very impressed. Now, of course that is, if the field coil is not burned up and the, um,
the output transformers not burn up and all of that, but I don't know. It was probably just
hanging in a machine that ended up, uh, radio that ended up getting parted. And it just happened
to be in really nice shape. Um, you know, these are old enough. We were talking about it on the
previous video. I think these were in the period of time. If you, you know, this is 1931, I think
from the early twenties or, you know, whenever the first radios were popping out to maybe mid
thirties, I think they were doing, um, technology was evolving so quickly that the thing was obsolete
maybe a year after it was made, you know? So it very well could be something like this comes from
a radio that was used for a year or two, and then has been sitting around for nearly a hundred years
in somebody's attic or something and just happens to still be in good shape, which makes you wonder
why they parted it out. But hey, maybe they turned it into a bar. Hopefully they put the Bluetooth
in it. Okay. So, um, okay. So let me see what I can figure out about that. The back cone part.
So here is Atwater Kent's documentation of it. This is the type in speaker. And, um, as you can
see, they're saying field coil inside. So that's where the field coil is. The output transformer is
on that box on the side there. Um, and then you have the plate down here and then this little,
they're calling this an insulator. It's just a piece of cardboard that's actually, um,
under there. We just looked at a minute ago with the camera. So the only thing in that cone is the
field coil. And I think that thing is just to cover, just to keep dust out of there. So I don't
think it has anything to do with sound. The field coil doesn't have anything to do with the sound.
So I don't, I don't think we've got any problem at all. Uh, let me show you the other speaker though.
So we're going to in the, we're going to try to patch this other speaker since I don't have
to patch that one other than that one little piece. We're going to, we're going to try to
patch this other speaker and it's a complete freaking train wrecks. Let me get it out.
We'll look at it next. So, you know, I don't really have much to fix on that. So kind of boring.
There we are now. There we go. Now I've got something to work on. Okay. I can fix this.
So, uh, yeah. Yeah. I need to make that look more like that. So you can recone them. Um, but
that's kind of an advanced technique. So I'm going to use the, the amateur repair time technique.
I wonder if, I don't know, this might not work. So basically the cone needs to flex.
I don't feel like it's flexing. If they're, if they're this bad, you've got the problem where
you might be warped or something to where it's like rubbing against the, the voice cone. Um,
however, most of it's there. So my plan was to just patch it all kind of tape it all back
together with a glue. I think it would work. I actually, I know it would work, you know? Um,
but that's only going to work if this can still move in and out. If this one actually can,
I'm going to drive some of y'all crazy doing this. So we'll go in. Well, okay. That's right.
It doesn't move much. So I guess it might be all right the way it is. Okay. So, um, the way I'm
going to do it, I'm going to do it the way that, uh, Bob Anderson does it on Banderson TV. Have
you seen him do it? If you haven't seen his channel, um, he's got an awesome channel.
Banderson TV. He does, um, mainly TV repairs, but he also does radios and just anything,
vintage electronics. I like his style. Um, he's, he's not a high end guy either. He does get some
really nice stuff and he really knows what he's doing. The difference between him and me is he
knows what he's doing. Um, but I like his style. He doesn't stress out about things. He doesn't
need everything to be perfect. He doesn't, um, I just like the way he does things, you know?
So anyway, he's done some videos where he's repaired speakers, some worse than this.
And the way he does it is he takes, now you can, again, I got to say this upfront because
everybody's going to lose their crap over this. Recone it is the best way to do it. It should
be reconed if you want to spend that money on it. The kit to recone this is like 80 bucks.
I paid $81 for that one, which is almost perfect. Um, to, to get the, the reconing stuff for this
is like 80 bucks. I don't, I just don't want to spend that on it. I don't, I want to, I want to
at least try to repair it first. And then if that doesn't work, I didn't lose anything. Then maybe
we'll recone it. We can do it in a later video whenever we work on whatever the, the 70 model
that I have that needs it. Um, but I think it could be repaired. I really do. Like I said,
on his channel, he's done it. So he takes coffee filters, cuts them into little pieces,
coats them in glue, and then uses them almost like paper mache to fix problems. And then when
you're done painting it black, you're, you're just basically trying to get the cone all one
piece. If you think about it, what the thing's trying to do is send electrical signals to move
the cone out, to push air, to make your ear hear it, hear the vibration of it. Well, if it's got
rips in it, it's not going to move right. And the air is not going to move. And so it sounds like
crap. But if you get it all back in one piece, as long as it's not rubbing the voice coil,
um, and as long as, you know, nothing electronics messed up with the transformers, not burn up or
anything, it should, it should work, you know? So we're going to see, we'll see if my theory
is correct. So, um, let's look at the back of it to make sure it doesn't look like there's any
crazy damage. I know the cord is damaged. So that's the little insulator card that we're
talking about. A little piece of cardboard just to cover this stuff and the plate. Um,
it also has a hole there. I think he's right. It's really easy to put your finger right through
that. Okay. So, um, yeah, we're good. So yeah, here's the cord. It's all screwed up. Believe
it or not, I found a replacement cord. You're not even going to believe it. Guess what? Made
I can't even hardly say it. It's almost impossible to believe. I found a replacement
cord made in the, made in good old United States of America. Believe it or not. Cheap too. We'll
talk about it later. Okay. So I'm going to, um, I'm going to go ahead and start trying to glue
it back together. Let me, I guess it would be better to do it from the back first. Um,
because it's all smashed this way. So I'm going to push it back and then we'll try to
glue it all back together. So let me get my stuff. All right. So we're using a leans
tacky glue. And again, we got this from a Banderson TV. He did this same thing,
mixed it in a bowl with some water and painted it on the, uh, some coffee filters. You can cut
out like a pattern, uh, get it pretty wet and then stick it on the back like a patch.
And then I'm going to, um, kind of baby it as it dries and keep this pressed down against the
patch. And then when I get it, when I get it dry, I'll do the front too. We're going to patch the
crap out of this. And, um, then whenever it's, when it all dries and it's all one piece again,
uh, we're going to paint it back black. And of course you'll be able to tell if you look at it,
but it'll look a lot better than this. So, uh, that's the plan. So I'm going to work through
it here a little bit and I'll show you what it comes out as, uh, when we get all that done,
it's going to, this cone is going to be a little bit thicker than the other ones, but this is so
thin. I mean, it's thinner than a piece of paper. Um, but it's going to be too deep and you've got
the glue, which gives it a little bit of thickness too. So you're, you're making the cone thicker
as long as it's pushing the air. I don't think it'll be that big of a deal,
but we're going to find out cause we'll test it. But that's what I'm, that's my plan.
I'm going to work through it as it's drying. Like I said, I'll push the, the, um, the rips up against
the thing so that it tries to dry kind of back in the original condition that it was in or close to
it as close to it as I can get it. And then we'll go from there. All right. So here's what it looks
like on the back. I couldn't get it perfectly flat because the cone isn't perfectly flat,
but basically I've covered pretty much the entire back of it with
coffee filters with glue on it. So it's like paper mache pretty much. And then the front
is starting to be back where it's supposed to be. So I'm going to let this dry a little bit
and then I'm going to cover the whole front with some too. I'm going to try to cut them as clean
as I can. And I'm not going to worry about the outside. I'm just going to, um, glue that. I'm
not going to worry about putting the paper all the way up here, but I'm going to try to go from here
as far down as I can and lay them in there. I think maybe four patches might do it. Um,
and just completely reconstruct the cone with it. You're basically doing a big paper mache project,
which I haven't done since I was about six. Look, it's going to be fine folks. Don't worry. I don't
know why you're getting so excited. I think that it's going to be fine. So it took about 45 minutes
to dry. That's not completely dry yet. Cause there's a little thicker. Um, and Bob Anderson
was saying that he likes it because it stays flexible. He just thinks it's good for if you're
trying to rig up an old speaker, that it's a good glue to use. So I am going to take his advice.
Okay. So I'm going to go ahead and put the patches on the front and basically cover all of this up.
Um, and try to do it as clean as I can. So that'll look decent after we paint it.
Okay. So that's what I came up with. We're going to let it dry. I ran some glue all the way around
the edge, um, because there was, there were three or four cuts on the edge. So hopefully that'll
help that. We'll let it dry. And then I'm going to turn it back over and work on the back better
because since I did it first, it's got some wrinkles and ripples and things in it. So hopefully
this dries, it gives it some structure. And then on the back I can, um, cut part of the old paper
to lay it down better or put more glue on it. Or I may just be able to flatten it and put glue on
it. Or we'll see if I can make it any better. Um, I think if I leave it hilly where it's got,
um, places where air can get under it, as the speaker moves, it might, you know,
degrade the sound. So, um, worse than it's going to be anyway. So we'll see. But I,
unless the voice coil rubs, unless it rubs the voice coil, I think it's going to work.
Okay. So I've got it to lay down pretty flat. This one little rip here, I don't like,
so I'm trying to put a little extra on it. Um, but I think we're going to be all right, you know,
and it, as I mess with it, it sounds loud, louder. Like it's kind of amplifying just
the scratchiness of your fingers on it. And the back I got pretty good. It's kind of hard to tell
whenever it all dries and we go to paint it. Um, I'll show it more to you, but it's all,
so both sides have basically gotten pretty flat. All right. So this is how the back ended up
looking. See, I'm just putting some black paint on it to make it look more presentable.
This is how the front ended up looking, which I'm pretty cool with. Okay. So let's do a before
and after, and you can tell me what you think. I think, uh, that's very presentable. It's not
perfect obviously, but it looks a heck of a lot better than it did. Now the question is,
will it work? Well, we're going to find out. I'm going to try to juggle these videos around.
The next video was going to be, uh, fixing the tune, the tuning capacitor, the volume knob,
the tone knob, and then, uh, trying to, uh, bring the thing up. Uh, so I think what I'll do is I'm
a little ahead of time, so I should be able to finish that video before I need to publish it.
And, uh, I'll get that done. And then that will allow me to, once I have the radio tested and up
and running, if I've got time, I'll be able to test the two speakers separate from each other.
Um, and then we can just do a comparison. So if I'm able to pull this off, I can swap that
into the end of this video and play this whole speaker video after the other video and blah, blah,
blah, blah. And hopefully we can pull that off. So, uh, hopefully we can test this sucker. Um,
we're going to do the cable next though. So there's a five wire cord. This is the original.
I was able to find an American company that makes a pretty nice product that's
a suitable replacement. So let me go grab that and we'll work on that.
Okay. So the name of the company is Grand Brass Lamp Parts in New Haven, Connecticut.
You can Google them online. Um, and they make, they basically make lamp stuff. And one of the
things that they make is cloth covered cord and they make it in the United States. So that's
pretty cool. The main difference between this original stuff and this stuff is that the cloth
covered, the wire inside of here is vinyl, uh, covered and then cloth covered. This is cloth
covered and then cloth covered. So this has five leads on it and this has five leads on it. Um,
it's 18 gauge, which is pretty much all they make. Um, I think. And it's actually slightly thicker
than what was on this speaker. So I think we're going to be just fine.
And this is just, you know, this lead is screwed up. Now the other one that I showed you before,
the very nice speaker, it has a nice lead and plug still on it with hardly any damage at all.
Very minor, just little fraying, just a couple of little spots. So minor,
it's not even hardly worth mentioning, but nothing as significant as this, obviously.
Um, so I'm going to take this cover off so that we can see what's going on in here. And I'm hoping
that this wire is just soldered in there. You know, there's a, uh, a stress relief there. I
hope that doesn't cause me a bunch of problems because it's, it's molded the size of the wire
and this one's slightly bigger. So we'll just see, I might be able to make it do something.
So this is what's underneath that cover and this cardboard was wrapped around the back of it and
then folded together so that it holds in place on top of those wires. So I'm going to get the
schematics out and we'll see if we can figure out which one is which. Um, and, um, cause that'll be
important on the plug and we'll, we won't be able to match all the colors, but we'll just see if we
can get somewhat like that. Okay. So if you look in this, in the, there's all kinds of paperwork
and, and, um, there's just tons of different things you can get for these that show different,
uh, what is the information basically on these chassis? What's the, what's the proper word?
There's lots of paperwork available for these. And if you look at this, this is showing you
the connection that we were just looking at on the back of the speaker. So the bottom left is
a black wire. The bottom right is a black and white wire. And then the top left is a brown wire.
The middle wire at the top is a brown wire with a red trace. And then the top right is a brown
wire with a white trace. Now, uh, that's hard to, uh, see on those brown wires because they've faded
over time. So for instance, the red trace is almost impossible to see on it, but that's how
it's connected. So it's connected black and black and white are the two bottom ones. And then brown,
brown and red and brown and white are the three tops. All right. And this shows you the other
half of it. So if you, if you're looking at the top of the plug, not the bottom, the top of the
plug, you see that it's lined up exactly the same. The black wires on the bottom left, uh, the black
and white wires on the bottom, right now, those two are by themselves. When you look at the plug,
those two, uh, are closer to each other. And then the other three form like kind of a triangle.
So it's just like it is on the back of the speaker, black wire and black and white wire,
and then brown wire on the top left, brown and red wire on the, in the middle and brown and white
wire on the top, right. And then if you look over here, the black and the black and white wire
are your voice coil. No, well, would you consider that your voice coil? You see what it's doing
there. Okay. And then the, it's a coil, we need to measure it. And then the, uh, brown,
it's the field coil actually, isn't it? That's the field coil. And then the brown, the brown and red
and the brown and white are your, uh, output transformer. It's a center tap output transformer.
So with that knowledge, we can not only wire up our speaker, uh, with the cut cord, but we can,
um, uh, we can actually test both our field coil and our output transformer.
All right. So we're going to test them. Um, you can't see it too good, but I've hooked this up
black wire, black and white wire. I mean, black wire, white wire, because this new wiring is a
different color and then blue, red, green, blue, red, green, man. If you look at the top of the
plug, it's the same black wire, white wire, blue, red, green. And if you look, it's just more
convenient to show you the bottom, these two, see how they're apart. And then these three form a
triangle and you're looking at the top of the plug, black, white, blue, red, green, blue, red,
green, just like black, white, blue, red, green, exactly the same. And over here, we still have
the, I can't quite, if you, yeah, so I think you can see. So over here we have black, black with a
white trace, brown, brown with a red trace, which you can't hardly tell and brown with a white trace,
which you can tell. You can tell this has a trace, but you can't tell what color it is.
Um, so this is the one that's in nicer shape. This is the one that we just did extensive
repair to. Well, so with that said, we're going to find out if we're screwed.
We're not, we're never screwed. We might be able to fix it even if it's not right.
Okay, so the field coil is 1100 ohms. Um, so let's see if we can test that.
1100. Come on baby. Come on now. I'm trying to help you. So I think the most likely good one is
this one that was in the, the radio for so, so long. The obvious problem with it is the speaker
coil cone was all screwed up. So let's see what we get here. That's 1198 ohms. All right. Well,
I like that. Okay. So I'm going to write them down on here. 1198 ohms. Okay. So now let's
check this one. Come on baby. This is the one I paid money for. Come on baby. Now,
come on now. Don't do me wrong. I'm trying to help you. 1114 ohms. It's in a little better shape.
All right. So both of my field coils are good. I like that. Okay. So it says the output transformer,
the primary is 300 ohms, but it's center tap. So I don't know completely what they mean by that,
but we'll find out. So I'm going to measure from coast to coast. What about that? In honor of the
only damn thing that's on AM radio. 278 ohms across the whole thing. Okay. Let's try this one.
278 ohms across the whole thing. Boy, that looks, that looks a lot like it's identical.
Okay. So let's try this one from tap to tap. I mean, from a center to tap 127. If I swing over
to the other side, 150. All right. You know, you want those to be the same, but they're not always.
Somebody was mentioning the other day after, I'm sorry that I don't remember who it was,
but somebody mentioned in one of the videos that when they wind those things, they use different,
what they were saying, I don't know if it's true or not, but basically when they wind those,
they have to use a different number of turns for one side of it than the other side of it.
Because just the inductance or whatever change or whatever they call it, the impedance changes
depending on where it is in the coil. So they don't get it perfect is the point.
So this other one was also 278 and 127. And then the other side is 151. Wow. Well,
you know what I think? I think we've got two at least plausibly working speakers. And I think
we also needed to look at the schematics again for just a second. Okay. Yeah. So it is center
tap right in the middle, according to the schematics. I was thinking since they're both
off that maybe it wasn't exactly center tap, but it appears that they're at least drawing it that
way. So the problem is probably what the commenter was mentioning that they just wound it with
a hundred windings on this side and a hundred windings on that side. And they got there what
they wanted, but it it's slightly different from side to side because of the location of it in the
coil. That's what in the transformer. So that's what we'll go with. But I think we're good.
Okay. So I checked both plugs at the other end on each pin, just measuring continuity between
the pins to do the same thing. Check the field coil and check the output transformer at the end
of the plug, just to make sure. Double, triple, quadruple check. I've got this one wired just
like that one. And I do. So we're good. So I put the little cardboard cover back on it.
This one didn't go on quite as good because the wire's just a little bit thicker.
And there's one screw actually missing from this nice one.
So, but I'm gonna put the cover back on it and we're ready to test the speaker, I guess.
All right. I have very good news. I found the screw that I needed for this one because I took
it off this one because the cable, it makes it stick out a little bit too far. So I cut down
some new screws. They're number eights. I was afraid there for a minute, they were going to
be something that wasn't standard, but they're number eight 32s. And I cut down some a little
bit longer than the original one and it's now mounted on there. Well, so there we go. Cool.
So on to the testing. All right, folks, that's what the speaker that we,
that's what the speaker that is in good condition. Okay.
And I've hooked up an antenna to it. I hooked up the ground. It does not like the ground.
I just tried to hook the ground to the electrical ground. It doesn't like that at all.
It just whines and makes all kinds of noise. Also the volume control will not go all the way down.
And since this doesn't have AVC on it, some of the channels are just very loud.
So there, this, it, it probably needs some kind of modification, either put a resistor
in line with the volume control or put a, you know, re redo something on the volume control.
Cause this is loud. I'm, I'm pretty much all the way down and it just will blow you out of here.
So it's getting really good reception and I haven't aligned it at all.
So basically what I'm doing this for is we're going to test this, this reconfigured speaker.
I'll just, I'll just go through some of the channels so you can see
that it's getting all kinds of channels.
Obviously it needs a line, but
there's plenty of buildings, empty buildings in downtown Cincinnati state.
Anyway, look for sure. It's a super agency.
Okay. Let's go up to the top of the bed.
All right. So we're at the top of the bed.
I believe the hum there. I think that's probably interference from the lights or something.
I'd like to get a nice clean, you know, fairly clear channel
so that we can test the two, see the difference between the two speakers.
So that's the WBT, the local clear channel.
So there's a spot here in the middle of the dial that's just loud as crap.
All right. So there's no time like the present.
Let's see if she works.
It's kind of scary because it's, you know, it's got the field coil in it too.
But what can you do besides just fire it up?
There we go.
There's a, there's a high right here at 900 is a really strong signal.
I think it's overpowering it when I get anywhere near that.
So let's see if we can get past it and get on the down below it.
All right. So we're down at the bottom of the down.
At least you can sell yourself on the idea.
Okay. This guy's an athletic freak. Maybe I can move him into that's our repaired one.
We need some music.
So I don't have a good channel coming in right now because of the kind of pull this out without,
and I know you shouldn't really be pulling it by the cord, but I just resoldered it.
So I think it'll be all right.
Let's see if we can get this other speaker going before the same song goes on.
Get ready. Cause here I come.
All right. So that was the crappy speaker.
This is the other one.
Same settings.
Okay. So I think I can conclusively say that the main difference, I think the so-called fidelity,
the fidelity is the same, but the volume is lower.
It still has plenty of volume, but this one is much louder.
So maybe even, maybe even almost twice as loud.
So I think it did fix it.
And I think it's usable like that, but I think probably because the cone is thicker now,
it's not quite as loud.
And I painted this so much that it probably made this where it's not quite as flexible
as it needs to be.
If you just saw that one, you could actually see that one moving,
even though it's such an old speaker.
And, you know, back then they didn't need much.
So we need to align the thing and maybe we'll mess with the speakers again.
Once we get it aligned, maybe once we'll get it aligned,
we'll try just this speaker on it.
If we can get a nice, clear, clean channel where it sounds good,
we'll try just this speaker to see if it's even possible for it to sound good.
I think it kind of sounds about the same as that one.
It just has lower volume.
So that's our speaker repair video, folks.
I hope you enjoyed it.
Still, the jury's still out on whether or not it's usable like that.
I think it is usable, but I don't know how clean we can get it.
We'll have to align the radio first, but that's next.
So we'll see you on the next video.
Hope you enjoyed it.
