They about destroyed this RCA Victor 1x51 tube radio!!!

Amateur Repair Time
257 followers
2.2K Video Views·Feb 2, 2025
We're trying to keep some of the vintage electronics out of the landfill. Many times when something stops working, it can be repaired if someone will simply take the time to attempt to repair it. This channel documents our amateur attempts at repairing vintage electronics we think are cool.
We don't typically restore anything, we're just trying to get them working again. We've found that most of this stuff was well built and with a little help will start doing what it was intended to do.
Radio Repair
Phonograph Repair
Clock Repair
Projector Repair
ladies and gentlemen welcome back to
amateur repair
time I have been cleaning up a little
bit in my closet and I
found this RCA Victor radio I bought
this on eBay a couple years ago when I
was kind of getting into it and
um I just like the look of it and I like
that it had a good challenge to it so
basically the guy said that he had taken
it
apart saved all the parts
hopefully um and then never put it back
together again he intended to fix
it never did so maybe we can so we'll
see I forgot that I had this and I found
it in the closet and was like ooh ooh
ooh I need to fix that finally now I've
got a whole bunch of them up on the
shelf and I've got a bunch more and I'm
still working on this Emerson
uh not Emerson filco and I'm still
working on this
Majestic
um but I feel like working on this
one so let's see so it's
[Music]
an RCA
Victor doesn't get much better than that
does it it has a piece of foam in it
hopefully to protect it hopefully it's
still got some of its goodies in
it so I've been worried about this oh
boy I've been worried about this
freaking oh hell it ain't even attached
I should have just took it loose all
right so there's the what's left of the
antenna it
appears that it's still in one piece so
we need to glue that on there
obviously here's what the back of that
looks
like this is to certify that this
instrument has the acoustical balance
which produces the tone of the golden
throat golden
throat DD Cole double dcole chief
engineer home instrument Department RCA
Victor so it's the golden throat
people now everybody talks about filco
being a
gimmick that is a gimmick hopefully it
does sound really cool
uh so let's see if I can pull out some
of this stuff we'll look at all of it
see what we've got and what we don't
have and what's broke and what's
obviously
destroyed and we'll go from
there what oh man the
tuning capacitor seems to be loose let
me pull that out of there without
breaking it well I don't like the inside
of the case they've broken off the
mounting studs
most of
them uh so we might have to get creative
when we go to mount it back in there is
a hole over there on the side it was
already like that I think there's
something actually that sticks out the
side there and it's uh it'll cover some
of that but I was already aware of that
this was very inexpensive people we
didn't go
deep all right so
this has mounts so I guess it's not
really all that loose it's just
isolated those almost look like jukebox
grommets little motor
grommets but I think they're actually
fine it's just it moves I don't know why
it would move maybe we'll figure that
out it's got a little tiny
speaker these two wires that appears
connects to the
antenna and then it has a little tiny
amp here
the two
ifs uh I suppose maybe that's the output
Transformer and five
tubes so that looks just fine now let's
see what the other side looks
like not much
there the speaker appears to be in
pretty good shape
yeah so look at
this what are you doing people what are
you
doing it's like they just ripped it off
instead of unscrewing
it man come on now come on now why would
you do that
so there
[Music]
are yep so five screws that they did not
remove they just ripped it
off I don't get it I don't get why you
would do that they must have just not
known it was like that I think we'll be
all right
um there got be some kind of way I can
clip it in there I mean the the knobs
probably going to hold it on
somewhat I think we'll be all
right if I can fix
it which maybe I can maybe I
can't so let's see how bad it gets
people I think probably works it's got a
bad tube or
something the rectifier tube is probably
bad somebody told me the other day in
one of the videos it's never the tubes
he's like I've been repairing them for
34 40 years well I don't know I fixed a
couple of them that it was just the
tube all right so the knob is also
damaged come on people come on now I
need something to work with here come on
now I guess that's what's left of the
other piece of the
knob
um this is a ring
that
probably maybe went in there I don't
know and then this is the probably the
broken piece from over there actually so
maybe we can glue that back what do you
think we'll see what we can
do and
then if I can get into this
one look how yellow this bag is you
probably can't tell but this bag it
might have been in here a long
time so this bag
has the other
knob with the
indicator I wonder how that works look
how it's
colored I wonder if it shines red light
up through there
somehow I don't think it's faded because
if you look there's like a
gradient so like the red color is down
on this
part so I think it's I don't think it's
faded maybe I guess we could look at
pictures but what fun is
that well there's our little
ring all right so I guess we've got the
two
[Music]
knobs we don't have the side
knob or do we yeah so this knob goes on
the
front this is the side
knob okay that's a little
better so worst case we could put
something else on there if we had to but
or I could order another one um but you
know this would be the one that you
really
need okay very cool all right so
um what do you think we should do first
I guess first we should take this plate
off that should have came off a long
time ago
people or should
we well no all that would have done was
take it off of
the case the proper
way I guess we need to get in here
should we do caps first or should we
just uh bring it up on the varac and see
if it was completely broke like the guy
I thought it
was maybe we'll get the
multimeter I think I'll get the
multimeter and I'll check the Ohms on
the uh
speaker and see if it seems all
right um
I don't like the look well I guess
that's all right this one looks awful
white doesn't
it when they get white inside it's
because they've lost their vacuum but I
think it's got to be worse than that I
don't think that's what that is
specifically okay um yeah so let me
check the this oh we don't have a yeah
we do have a power cord never mind what
do I know yeah maybe we could turn plug
it into the variac and watch it and um
see the amperage go up and see if it's
going to short and uh try to bring it up
and just see if it does anything and
then rebuild it so I'll check the
speaker just the resistance on it just
to see if it seems like it's got a good
coil or not or if it's connected or not
um and if that seems fine we'll um we'll
bring it up up and see if uh we get any
kind of tube glow and where we go from
there okay so I used the multimeter and
just checked across the leads of the
speaker and I'm getting like 1 ohm which
is actually just checking the output
Transformer so the speaker could still
be bad but
um I guess we'll see and I didn't check
the um primary side of the output
Transformer but I kind of just want to
bring it up and see what it does so I
have
um plugged it into
my ammeter and into my variac which is
fused and we'll just give it some juice
and see what
happens so I would assume you know what
that means that this is the volume or
and the on off let's see okay so that's
off that's on we'll give it to some
healthy volume and just see if it does
anything
uh I suppose something's wrong with it
but I don't know so we'll uh slowly turn
up the varc and just see what happens so
I'm going to watch this if there's a
short in
something the uh amps will start
pegging and it'll start drawing all
kinds of amps
we might end up with a capacitor
exploding or
something so that's at 60
volts and it's drawing like no amperage
so it's probably not doing
anything um we've probably got a
situation where the
um the rectifier tubes messed up or
something I see no glow at
all I mean I did see the meter was
moving let's go a little
higher oh yeah she's
up that's crazy I wonder what the deal
is
damn thing
works why would the guy tear it all
apart if it
worked it don't even sound that bad
really immunizations help give you the
power to protect your baby a message
from the centers for disase control
all right so very little reception uh
most of it's not working so I think the
first thing I'm going to do I'm going to
just test the tubes just for the heck of
it um if we've got a one of the tubes is
way out of line at might um uh really
give you problems with reception and
then also of course the Caps are all bad
you if I run it too long with the old
caps in it you know I run the risk of
screwing up the tubes even worse so I
don't want to do too much of that but
it's yeah of course you're going to
replace all the capacitors but what fun
is that you know the fun is trying to
figure out what the problem
was if you swap all the caps and then
you just go oh it works great
we can do that with any of them but it's
kind of the only thing interesting about
this one is it had a little bit of a
story the guy took it all apart trying
to fix
it apparently it works at least halfway
the way it is so I don't know if
um maybe just he didn't like the
reception or maybe it was physically
damaged and that's what he was doing I
don't know I wish I could find the
listing for it so that I could see what
he said about that because I don't I
don't remember exactly what he said but
it was something about that he took it
all apart and was going to repair it but
never uh forgot how to put it back
together or something like that but I
mean it's it's not that
complicated um or maybe he was talking
about he couldn't Mount the chassis in
there because he broke those studs off
or something I don't know maybe maybe
got dropped on the floor or something
all right so I'm going to test the tubes
next and just see what that tells us
well it occurred to me I never turned
the the voltage all the way up so with
it at 120 You' got a lot healthier neck
glow and you get a bunch more channels
obviously because it's at full
power and then it's $5,000 that I have
in my pocket and I'm freaking out and
then so it's working fine
[Music]
yeah okay cool all right well uh still
I'll I'll test the uh tubes see if we've
got any that are borderline or weak and
then we'll recap it all right so first
up we have a 12
sa7 seems good I don't why it goes all
the way up and then Falls that's kind of
weird it seems good I guess I need to
look at the schematics eventually to
make sure that it's got the right tubes
in it but it probably
does next up is a 12
ba6 yeah also 80 that's cool all right
so two of them at least are pretty
good okay so this one is the 12
sq7 and it's uh it ain't
great it's playing triple Duty you have
to test it three different ways so um
that's going to be the
detector uh whatever the other two
things are on the schematic so I'll look
that up but um part of it at least isn't
working very good let's see about the
others
so um C EC so I need to go to c c
F and
then
ab and
then B
one well the second part of it
great almost makes me wonder if I'm
testing it right for the first one to be
so
all
um I am testing it wrong I had it at 99
sensitivity it needs to be at 85 okay
let's try that again so at 85
sensitivity well it's still all
right
um okay so now we need to do c
c
f AB B1 all
right the third
test the Third test is is good okay so
uh let me finally look at the schematics
and see if I can figure out what that is
and then I'll see if I've got another
one that's working a little better well
I looked I looked on the schematics it
is the correct part um it's a 12
sq7 and I look through all of my parts
and I have this one that's
ugly it's ugly but if you look a lot of
that is just where the paints came
off and uh the thing tests pretty good
you know this on our other one we were
down here and then on the other two
tests we were at 80 so that's the first
test let me try the other
two no dice unfortunately it's got a
short in it on the whatever the second
test
is
so it's the
ABC it's the detector and it's the AF
amp
so I'm in the same position I had
another one too that's just bum so I'm
in the same position where even though I
have thousands of tubes I don't have the
tubes that I need isn't that's probably
something that you just never get away
from isn't it does Mr Carlson run out of
tubes all the time I bet he does I'm
gonna have to send him a message and say
hey buddy I noticed your your garage is
full your Warehouse is full of boxes of
tubes I'll bet you still run out of
tubes and don't have the right ones and
I'll bet that's true no matter how big
you get no matter how many you have you
still don't have the right ones and it's
a 12 sq7 which I've heard of many times
so I'm sure it must be like one of the
most absolute common ones
but um I may have some I've got some
that I don't have sorted yet and I I did
a quick glance through those but um I
could only find two well I found three
actually I can find three at the moment
none of them are any better than what
I've got so
so obviously the thing's working with
that portion of it screwed up it would
just be cool to have a nice hot one in
there to see if it gets better reception
but uh we'll move on all right so I got
the plate off of it that plate is what
mounts to the actual cabinet um uh this
side mounts forward so all on the front
of it there are these little screws that
hold it in place from the back and then
these little
inserts are what were mounted into the
plastic pieces that are broken on the
front so it's as if somebody ripped it
out without unscrewing it unfortunately
it could have been something like um
that the knob was off or something and
it got pushed but you can see it's not
super deep so even if it did that you
wouldn't think that it would push back
enough to break all of those loose so I
don't know if somebody just hamfisted
ripped it out or if it something hit it
right in the middle to knock it out but
there doesn't appear to be that much
damage to the case other than that so I
don't know what exactly happened there
you could fix it a bunch of different
ways um you could even Mount these studs
back in where they go even if the
thing's completely gone um using some uh
putty or something you know you could
put like uh some kind of uh like JB Weld
right and just Mount these back where
they go but getting them exactly
right getting them exactly right well
they'll take a
screw uh through that hole for instance
you know and it's perfectly lined up
let's see here how close do I have to
get
it we're looking at it backwards
actually
but you know so I got to get it dead on
if it's off a little bit I guess the
screw would go if it was off a little
bit hm
we got about a 16th of an inch of play
what you can maybe do is is
put you could put JB Weld on like two of
them and then while it's still wet Mount
the thing get the screws in it and then
hold it where it's right and then let it
dry and then do a couple of the other
ones and keep going so if you did it
while it's wet it might work I might
attempt that um maybe I'll look see if I
can find some JB well tomorrow I'm going
to the flea market tomorrow and um if I
can remember I'll see if I can find
something like that but in the meanwhile
we'll replace these capacitors I had
someone on a previous video very angry
that we're replacing capacitors they
said we should just leave the original
capacitors cuz we're never going to
really use it anyway and you're just
trying to leave it as an antique I can
understand that thought
process I just don't
agree you know I do part of part of what
I like is that the thing works you know
so I leave as much original as I can but
I kind of like that it works so I know
some people would think otherwise but um
and it's just it's not going to work
long with the original caps so you got
to swap them and if you if you've
watched my other channels and stuff or
if you've watched this channel you know
that I'm not a stickler for making
everything brand
new um I don't like making things look
new I don't like you know making a
pinball machine looked like it just came
off the factory floor in 1972 but now
it's got LEDs in it I don't like that so
I don't mind leaving things with wear
and age and all of that but you kind of
got to replace the capacitors or you're
not going to be able to use it and if
you can't use
it you know I got plenty of stuff
sitting around that doesn't
work I would like for it all to work
okay so I'm going to replace the
capacitors all right so I'm going to
snip them out one by one and replace
them and um we'll go from there but
remember it already works okay folks I
got all the Caps replaced I have 1 2 3 4
I have six caps and the filter cap so
that's a very easy one
actually
um this is my little thing I rigged up
for the filter cap so it was a 50 150 I
put a
47 160 and then uh 30 150 I put a
33 4 400 I think I had a big one uh so
that should be fine but there's one
thing that I did that you you really
aren't going to like it seems like in
every video I'm apologizing for
something so this one cap you can tell
me down in the comments below what you
think I think this will be a good uh
thing for people to argue
about it's a
047 but it was just a normal cap and I
replaced it with an X2 now the voltage
ratings high enough so I put a safety
cap in instead of a regular cap only
reason I did it is cuz I ran out of the
regular ones I ordered some but they
just ain't got here yet um so I'm low on
some of my caps so I put a safety one in
theoretically it ought to work fine
because the safety caps just designed
better you know so that it won't short
but it could be problems with ESR and
things like that that make it not work
quite
right so let me know what you think is
it safe to replace a regular cap with a
safety cap are you are you just
overdoing it by doing that and it'll
work just fine what do you think I'll
bet half of you say yeah sure you can do
that it's no problem and it's not ideal
but why not it'll work and then the
other half are going to say no there's
some weird measurement that you can't do
that so um it'll be interesting to see
so I'm going to try it out make sure I
haven't blown anything up and then I
need to check all the resistors but I
I'm going to have to get the schematics
before I do that
all right I haven't blown it up yet it's
getting in WSM with just the the uh no
alignment yet and with the the uh
antenna just laying on the
table uh which is 650 from Nashville
which is kind of hard for me to get I I
usually get it on a radio if it's
working all right but um it's a little
tough so if it's getting that it's
working pretty good for me
and I haven't even aligned it or
anything so we're still working so far
so let me uh check the let's find these
schematics and I'm going to uh check the
resistors um and uh just make sure none
of them are way out of spec and replace
whichever ones
are okay so I did replace a couple
resistors a few let me show you what I
did um
so on the schematics I got them from
Nostalgia ER there are several
variations of this chassis this is the
1104 the very first one so this is the
very first version of this chassis there
was also an 1104
D1 let's see if it lists them all in
here yeah here we go so there's an 1104
an 1104 D1 an 1104 A-1 1104
B-1 there is an 1104
just a regular a and 1104b so I guess
there was 1104 and then 1104 D1 and then
there was
1104a and then 1104 A1 and then there
was an 1104b and 1104
B1 right with different tubes and blah
blah blah so but I've got the very first
one so there were three changes from the
earliest version of it or there was even
more than that but on the other page I
didn't print it out but it talks about
the Chang so one of the changes
is uh this resistor here R six which
connects from the detector to the volume
control to to
ground um it was the one I had was 10
Meg but it had ballooned up to 11.8 Meg
and then when I took it out of circuit
it it kept testing shorted and
then 11 Meg jumping all over the place
right so I don't know what the hell is
going on that resistor but I took it out
and on the very first version of it that
was a 10 Meg resistor but they changed
it and made it a 4.7
Meg so I didn't have a 4.7 so I changed
it and made it a 4.4 by tying two 2. tws
together all right so this is now
4.4 so it must it's some kind of upgrade
maybe to get like more volume I don't
know right so uh I'm since that one was
out of spec anyway and going the wrong
way like they thought 10 was too high in
the second revision so I went ahead and
went the other way um so I went ahead
and fixed that this one
R3 which goes between the
um uh the
if um can and the other if of can was
originally 3.3 mine was dead on spec but
they also after the first revision
changed that to 2.2 so I went ahead and
did that as well since I had the 2. tws
and that is this bad boy right
here all
right so the other major thing was that
on the
rectifier
um this resistor isn't even there so on
the on the very first version they
didn't have a resistor there they just
had it those shorted out so that's the
plate Circuit of the rectifier tube it's
shorted from here to
here which you can
see uh so they are shorting pins five
and three together which
is yeah that's that right
there so this is a resistor on later
versions but they've just got it shorted
now I don't know if the point of
that was to lower the voltage going to
the dial lamp no it can't be because
that's just a winding there so I don't
know what I don't know why they did that
but on the very first ones there's a
short there like mine is right
um but I don't have a 33 ohm so I left
it
off and I don't think that would have
anything to do with this or this so I'm
not that worried about it
if we get where the radio is not working
properly I'll track down a 33 all right
and uh another one of the things that
changed on the the the different
versions was it said that uh one version
they had the wrong if cans at the
factory so they added two little caps to
fix it two little ceramic caps to fix it
this one doesn't have the little ceramic
caps on it so apparently it had the
right
if uh
can okay so then I I checked through the
resistors this one's dead on the money
which is surprising I think isn't that
the one that usually gets the brunt of
it that basically creates the B+ that
one was
perfect uh this 150 was off it was like
189 or something but I was able to
replace it so I've got a 150 in there
this 470k was dead on the money this 220
is a little high it's 235 but I don't
have a um I don't have a replacement for
that so we're going to roll with
it this this 47k is dead on the
money uh the two main ones that are off
is this 100 ohm is 137 and this 100 ohm
is 134 so that's
connecting uh the if to
ground and over here used between the
[Music]
converter and the oscillator
this one's dead on the money so these
100s have drifted but I don't have any
100s here I need to get here at the
house I need to get more of a complement
of resistors so I think we're good with
it the way it is but you know it would
be better to get those completely
inspect that's pretty high I think if
they're like 20 if if if they're at 120
I'd be all right but 134 137 it's a
little
out all right so I waited till the next
day and I actually went and got the
resistors so I've got 100 ohm
resistor um 100 ohm
resistor and a
220k resistor that I've replaced now so
basically everything is in Spec
now and now I'm going to align it so
I've got my signal generator here I also
put some connectors on the uh antenna
wires so they can get a better
connection on this back plate because
you need that to uh do some of the
alignment so to us comp based on all
right so I am fixing the
plastic by putting the putting the
little inserts in that are threaded
three of the studs are halfway still
there so I got this JB Weld plastic
bonder where you can basically like mix
up
plastic
crap and I've mixed up a bunch of it
around it it dries really quick and uh
hopefully it will reform some of the
plastic that's holding the studs in
now the two over here are so far
gone I don't know that it's going to
happen on those so maybe I'll just see
if I can hold it in place with three
screws
um I could once I
uh there is a way to do it I could mount
it to the plate and then once I get it
where it will those three will go in
there take it back out put the other two
studs in with the screws mounted put a
whole bunch of the JB Weld crap on them
and just mount it in the in the case and
let that JB Weld just dry and create
whatever the hell it needs to create
around those studs and then carefully
remove the screws once I get the screws
removed use more of the JB Weld to build
it up to make it stronger so that's my
theory at least we'll see if any of that
actually works out in in in play here so
that has dried and amazingly it seems to
have worked so it's it's holding the
thing in
place the insert and it's I mean it's
like plastic now so it just remade the
whole thing that is really cool JB Weld
plastic
bonder um
so it seems like those three are just
fine if the screws will line up properly
I think they
will all right folks so this is how the
inserts turned out it actually came out
pretty good I was able to get all five
of them back
in um so I just used
this JB Weld plastic binder I've been
working on this for a few days on and
off um and so I put the the three I was
able to mount in where they went and was
able to just plastic Bond them up and
then I put those three screws in the two
over here I couldn't tell exactly where
they went so I just uh mounted the studs
with the screws on there Loosely put a
little bit of the plastic plastic
plastic bonder on it and then laid it
all down flat and mounted it and then
those just hung there while it dried and
that told me where they were supposed to
be and then I took all the screws back
out took the plate back off
and uh made it
thicker and so it should be as strong as
it was
originally maybe even
more so I'm very happy with that so
that's going to mount back in there
exactly like it's supposed to be
so that's cool getting that um fixed
which was the main problem I guess with
the radio since it was actually working
when we got it there was a little
chipped piece missing on the side that I
was able to put back in as well I just
used super glue for
it and so uh I've got this aligned as
good as I can get it I think the the t2
if may be screwing up I don't know um
but we'll put it all back together with
the antenna and put it all in the case
how it's supposed to go and see uh see
what kind of sound we get out of it all
right so I was able to super glue the
little broken piece of plastic back in
here and then slide the little collar
back on it that's that side one for the
volume and then uh
the back panel I didn't really have an
appropriate glue for this I'll get
something at the store but so I just put
a couple zip ties on it to hold it in
place for the moment um resolder the
wires just to make sure everything was
making good contact and we're ready to
try her
out all right
folks so this knob I haven't cleaned it
up much yet but this knob actually goes
behind all of that so it mounts to that
plate before you put the whole thing
in right and you can see right
now that you can barely see the
indicator but the back of it was painted
like orange or a pink so I think that
will light up when we turn it on I got
the knob back on here it's in rough
shape though but let's see what we
got yeah look at the light game that was
decided by barely see theer they are now
five and five in those 10 games
I never understood that but some of
these the dial itself does not really
light up the only thing that lights up
is like the indicator so I don't know if
I've got something missing there may be
like a some kind of baffle that goes in
there that makes the light shine out
better I don't
know all right so let's see if we get
anything let's start at the bottom
now remember this 12
sq7 uh is in bad shape it tested as so I
think I'm I might liveen this thing up
with a 12 sq7 I've ordered some I just
not here
yet only so maybe that's at
560v digital
by the way if any parts of this part of
the video go go quiet or jump It's
because uh YouTube didn't like whatever
we're about to find on the radio and
made me delete
it there was something there maybe at
590
that ain't good
I could be volume I can't be
volume I'm
goom last that's basketball at the
highest level requires okay that's
they're talking about basketball that's
going to be that Sports channel that's
just above w WM WSM 650 usually like 660
I find another one that's Ball
Sports so I may be able to go down
slightly and get WSM
[Music]
yep
iwsn it's a little off it's probably at
640 on the indicator but that's
650
the
exclusively supp store.com for detail so
that's going to be the sports fans the
shot in the tools necessary to protect
themselves so there
time
and so I think that if's fine I don't it
was giving me problems earlier but I
after that I resolder the link uh on the
um antenna and maybe I was just having
intermittent problems with the antenna I
don't
know there's no thread I think it's the
12s Q7 all right the that're drawing
here is
and lead into the City and they're
throwing the pal branches down and
they're all saying hosana
welcome I mean that's not bad for a
little table radio it's getting in all
kinds of stuff
it even looks something like a church it
should and because it goes on the Block
too I've looked into it
history we you are there we're going to
take a time out and uh look at some of
the numbers when we return first we'll
tell you that hereis terer it's the
official grocery store of your dicks
they offer everything you need for the
perfect game day from Subs to p
or overa with
us first of all Hamas is a proxy of Iran
so when you're looking picture Okay so
we're coming up on 1110 which is the
huge local
channel that's going to be
this home court and gets by UCF
10883 all right so turn it back up
now
ten Mississippi State
[Music]
[Music]
and St listening presented byy founding
partner of iHeart women's
sports it's so noisy
I can't I can't do this you have to you
know focus on will now Aaron Glenn be
[Music]
so it actually gets all kinds of
reception it's just not super selective
um let's go back down to WSM that was
the best
[Applause]
[Music]
[Applause]
[Music]
thing America's country station
[Music]
a tone adjustment might help uh get it
to sound a little better let me turn off
those other lights so we can see how how
well it lights up at
all it looks a little darker on the
camera than it does here in in real life
but I can read the numbers just barely
[Music]
though all right so I think that's as
good as I can get it till we get to 12
sq7
in uh when we get it in I'll uh I'll pop
it in and see if that makes a difference
I hope I don't have to align it again
after that but you know what I think I
might but at least we got it all
physically back together and uh it does
work just it's not a great
performer but then again who knows if it
ever
was so there you go folks hope you
enjoyed it let me know what you think
you think it's the 12 sq7 you saw me uh
test it or do you you think it's an
alignment issue still or both so leave
your comments below now if you like
watching me Tinker with these
radios uh and I don't know what I'm
doing here's one I did a while back I
didn't know what I was doing on that one
either but it actually turned out pretty
good so I'll see you on the next one
hope you enjoyed it
