The Preset Buttons on This True Tone Western Auto Radio.. And WBT 1110 Lives?

Amateur Repair Time
257 followers
218 Video Views·Aug 9, 2026
Check out our Patreon page, for all of our channels. Contains outakes, concise arcade repair tips, bloopers, repair FAILS, Audio youtube wouldn't allow us to upload, and much more!
https://patreon.com/JoesClassicVideoGames
------------------------------------------------------------------------------------
AI Generated·May contain errors
Ladies and gentlemen, welcome back to Amateur Repair Time. We've been working on this
old school western auto radio. It is a western auto supply company, badged as True Tone,
D2616B, not to be confused with the D2616. And in the previous video, we talked about it a little
bit. I bought this at a picker's place, as they call it, kind of an antique store, but they got
all kinds of stuff in there, for $30, which is more than I usually pay for radios, by the way.
But it's got a really cool case, which is white, and I kind of liked it, so I went in and paid
$30 for it. And then after getting it here and messing with it, the thing already worked.
Somebody had already recapped it. But in the previous video, I wasn't happy with their recap
job. They had done a bunch of nonsense. It ought to be illegal, some of the stuff they did to this
thing. They just had a bunch of caps in there with a bunch of electrical tape around them.
So I took that all apart, and I moved them and mounted them to a terminal strip on the other
side of the radio. And so we've got the thing working. It was already working. But in this
video, I want to check the tubes to see if any of them are weak. And I want to align it, and I want
to figure out these push buttons. It has these awesome push buttons on it. I have very few radios
that have push buttons. That one up there does, but we haven't worked on it yet. And then I've got
one or two floor model ones that do. And I've probably got a couple more small ones, but I
don't have a bunch of them. Usually I get these little cheap ones, and I like the cheap ones.
I get these little cheapos that are just straight up AM players. So anyway, we'll mess with that.
So it's working. It doesn't sound the greatest. Well, let me ask you this. I want to play this
exchange. Such an honor. Lindsay loved them. They were like family.
Okay. So I think that is 6.50 AM, WSM Allen Asheville, the country town. And it's at about
6.90 on the dial. So not only is the dial off, but it's not super selective.
Everything kind of pushes together. It doesn't really lock on a station.
And then you've got this going on at the low end. So wasn't that just at 800?
Okay. So I don't know that we'll get rid of that whine down on the low end or not,
but I'd like to make it more selective hopefully by aligning it. And I would like
to line up the dial obviously. And then 11.10 is gone now. So let's go make sure. I think it was
at like 1200 before. Yeah, that is so sad. So our local clear channel station, 11.10 AM, which is a
50,000 watt station, for the last year has just been playing a loop telling you to listen to them
on FM and they shut the freaking transceiver off. It was a radio station been around since the 20s.
I saw the towers today. When you're driving around Charlotte, you can see the towers everywhere.
There's three huge towers for the radio station. And of course the lights are still blinking on
them because it's a safety thing, but completely dead. Cut one of the oldest radio stations in the
United States off the air because I guess they didn't feel it was feasible anymore. But like I
said, it's been gone for like a year or six months or something like that. They've been telling
everybody to listen to their FM channel. Okay. So I think the first thing I want to do is test
the tubes. So I'm going to pull them out one by one. Now, obviously they work, but I just want
to see if maybe, because like I said, it's not super selective and I'm trying to learn when I
work on these. This is amateur repair time, right? We already did the caps. I checked all the
resistors. See my work here. We did have one that was a little off, but it's for the dial light. So
it doesn't really matter. Actually, you know, the dial light is kind of dim, so maybe it does
matter. Maybe I can check that voltage and see what kind of voltage is getting to it. But all
the resistors were fine. We had a couple, like this one's 270K, it's supposed, it's 335K. That's
like 25% off. That's probably supposed to be 20%, but close enough. What does it say down here?
Nominal tolerance on component values makes possible a variation of 10%
in voltage and resistance readings. So, nah, it's a little off, right?
But I wasn't too concerned about it. Okay. So, but if one of the tubes is weak, that would help
pipe it up a little bit. But as you can see, it already gets a lot of channels. It's just not
super selective and we need to align it to the dial. So let's check the, let's check the tubes
first just to see if we've got a weak one and we'll go from there. Okay. So I've got this model
747. I've actually got an IKO, an older one that I like better than this, because this one always
gives me kind of shaky readings. I think I need to go ahead and calibrate it, but it will basically
tell you if the thing's completely dead or not. That IKO gives me better readings, but I just
checked it and it doesn't want to do a lot of tubes like the 35Z5s and stuff. I've got a
older list that I've printed out for it, but none of those were on there. So maybe I need a newer
list. I assumed this radio was from the forties, and that IKO, I think is from the late forties.
So you'd think it would do it, but whatever. All right. So this is a 35Z5, which is just a
rectifier. So it should be good. And obviously, again, the radio is working, so everything seems
good with that one. I'm going to clean it off a little bit and put it back in its socket and
we'll just work through all of them. The rectifier and the output, I would assume
are good enough, but the other ones are questionable. Okay. So this is a 35L6.
And so the way this particular tester works is you've got all of these levers down here. A lot
of them are like that. And you just set it up by the book. You've got a heater setting. You've got
a sensitivity setting. This is all pretty standard. And then you've got a whole bunch of different
sockets that are wired different ways. And to check for shorts, you just simply hit the short
button and see if the short light comes on. It does not. And then to check for grid emission,
you do the same. If there's a problem, the short light will come on. And then in the book,
it says for this particular tube, we use test switch one. Not great. This is what I'm talking
about. This tester often will not get into the good on certain things. I've probably got some
resistors messed up in it. I hate to take this thing apart, but I might have to. I could at
least take it apart and look at it. Okay. So yeah, I'm not super happy with that. And then
to do the short test, I mean the life test, you hold that in and then you press this life test
and see how far it drops. And if it's about the same, then you're good. If it drops more than
about 25%, it probably doesn't have that much life left in it. I think we'll go ahead and just
look at the schematics of this thing and see if there's a burn up resistor in here that's causing
us a bunch of problems. Look at this beauty. Isn't it the most beautiful thing you've ever seen?
Okay. So we've got all the sockets, a couple resistors here and there. We'll check that out.
Here's a third. These are just some kind of jumper or something like a ferrite core or something on
the jumper. A few more resistors there. Huge switch here for the heater voltage,
transformer of course, a few switches, and then a little power board. Now the meter is actually on
here. A couple light bulbs and five capacitors. This is looking a little toasty. Could that be
our problem right there? Okay. So I've got a schematic for it or let me show you the schematic
for it. So you will feel involved. I think I've got the schematic for it. That looks like the
schematic for it. For what? For it. Okay. So yeah, so they've just got all of the sockets wired in
parallel basically, depending on what pin goes where. And the resistors that are mounted on a
couple of them, I guess, are right there. So we can check that all out. Here's the resistors that
are on the switch down at the bottom, what we were looking at. I'll check those. I think it's
more likely to be a resistor than a capacitor. I mean, those capacitors obviously are useful too,
but I think it's probably more likely that we've got some burn up resistors. All right. So let me
poke through it a little bit and see if I can find anything obviously messed up. And I'm going to
stick with the same 20% or so rule and not worry about it. It says resistors are half watt plus or
minus 10% unless otherwise specified. If it's close though, obviously I'm not calibrating
this thing. I'm just trying to make sure that it's up to snuff. That IKO, we did it a few videos back.
We found a burn up resistor in it and it completely changed how it was working. There was a couple
tests that weren't even functioning properly because of one burn up resistor. So I think we've
probably got the same thing going on here. Probably what happened was a shorted tube got put in it and
burnt some stuff up. But let me see what I can figure out. Okay. I didn't find anything even far
out of spec. I mean, everything was like 10% or maybe 15%. Some of them are marked as 5%. So I
guess it is a calibrated test equipment. So I guess they should be really close, but
I left them out of there. I was looking for something that was burn up. Even that one that
looked burn up was not burn up. So then I just checked the calibration. So the signal level here,
I checked that and it was a little low. So I adjusted it up to 1.5 like they wanted me to, AC.
And then the bias voltage, I checked that and it was a little high or actually a little low
because it was negative 2.8. So I adjusted that, got it down to negative 2.5.
There is a meter bridge balance. I did that with the 10K resistor. The meter basically was dead
on zero where it's supposed to be. Short sensitivity and grid emission sensitivity,
I didn't mess with because I'm more interested in the... I can't get this thing to tell me that
any of them are any good. I guess it's a little higher now than it was before I messed with it.
Let me find another 35L6 and we'll test it just to see if they all test like that on this
particular tester. Okay. So I've pulled out some more. I've got one that's all black.
And when I test the shorts, it is shorted. So that proves that the shorts work. So that's good.
I'm going to trash that tube. Let's try another one. Okay. So I have three tubes. All three of
them say shorted on this. If I put the original one back in, it is not shorted. And I found a
Sylvania here that is not shorted. And when I test the Sylvania, it's just a much better tube.
So apparently the thing's working. I don't know if the calibration helped it out a little bit or
what. But remember, I've got tubes from all over the place. I got a whole bunch of them
in one big lot one time off of an old repair guy. And then I got a bunch more off of a TV repair
place that went out of business. And then I picked them up all over the place. So I mean,
I probably just have three shorted tubes. That one obviously has problems. Okay.
This one don't look too great and it's cracked. So that's two. And then this one,
I thought for sure would be cool. It looks pretty good, but it's a cheapo.
It's a realistic long life, which is some known brand, no name, something. So I guess
there's just a short in it. I don't know. So we'll go with the Sylvania. Let me check my,
I've only got one other one here. I think I might have some more stashed somewhere, but
I'll check the other one while I'm at it. I'm just, I'm just trying to get an understanding
of if this tester is actually testing them, but it appears it is. It says that one's better than
that one. And it says these three are shorted and it looks like this one certainly is.
So, okay. So I've got a Raytheon here, no shorts, grids fine. And it tests really good too.
So, okay. Maybe we're back on track now. So I'm going to go ahead and swap. I think I'll swap
the Raytheon in because it seems like it would be a replacement. So basically what I'm trying to
just save the Sylvania in case I get a Sylvania radio, it'd be kind of cool to put the original
style in there. So look at this beauty. What a gorgeous tube. It's got three tests and unfortunately
on the very first one, it's the Joker. It's giving me the Joker. 12sq7. All right, let me try a
different one. So it looks like all of these have that little band on them. This Hytron was much
worse. I mean, it was like 20. This is an RCA. It's at about 80. So it's much better. So I'm
just going to check through a couple of them and then we'll check. We'll do the other tests.
This is another Hytron. These things must just be dogs. This Emerson here that looks kind of rough
tested 100. I mean, it's killing it. But these Hytrons must just be... I'm sure they were like
aftermarket tubes. Yeah, they're not working. Okay, so here's what one looks like with the
grid emission tripping. Reject. The grid emission is failing big time on this one. And the short
doesn't light, but it goes high like that. So I'm going to look in the manual and see if that means
anything. And the test did not do anything. You can kind of tell. It's probably got dirty pins
under it, but you can also tell that that thing's been stored improperly. Okay, so I found several
of those that just weren't that good. And I saved the one that was in it because it was marginal.
And there was a few other ones that were marginal. One of the best ones was this one, which is a
Wizard. No shorts. And it had good tests on the first test. But the second and third test,
it was in the Riddler zone. But this RCA, I think this thing's new old stock. But again,
I like that because it's kind of proving that this tester is working. If you look how shiny
this is, what probably happened was I had this in a box that fell apart or something. So I just put
it in a new, a handwritten box. So this is probably a new old stock one. So we're going to swipe that
in there. Nothing but the best. Okay, so we're up to the 12SK7. There's actually two in this radio,
which of course is an unmatched set. Somebody, again, already capped this before I got it.
So it was serviced at least that one time. Yeah. I mean, this is educational to me.
I've done several radios by this point, but I'm nowhere near 10% of understanding of them.
But it just goes to show you, these things will run on anything. You don't need
perfect tubes in there because all of these are screwed. No shorts, no grid leakage.
Yeah. These are all really weak. So let me see if I can round up some 12SK7s. I know I've got a
bunch of those. Okay. So the 12SK7s, the RF one, is that the RF one? The first one. It tests pretty
good, but the other one didn't. What are they calling that? Let me get my terminology right.
Yeah. The RF amp tested good. The other one, I think, is being used as the IF amp,
and it did not test good. Wouldn't that hurt my selectivity? I think so.
Okay. So I've got a few. I've got some more too, but the two that actually tested the best
were this new National Union, which has rust on it. That's not really... I guess it's just...
I don't know what that is. I guess it's rust. It actually tested pretty good. No shorts or
anything. And then this Micro, which was in this box, the standard brand box, which has it printed
on the top. So I don't know if... I think these were probably surplus back in the day. It doesn't
peg the meter or anything, but it tests about 80. So the two aftermarket ones, or is that what you
would refer to them as? The two third-party ones. Although I don't know if Western Auto made their
own or not, but the two replacement ones test the best. So I'm going to put them in for those two.
So I think that leaves us with one left. So again, we've got a 12SA7 in it. Not impressive.
Let's see if I got anything better. Okay. So out of all those I've got, this No Name here
seems to be the best one. No shorts, no grid leakage, and we get a Riddler out of it. But hey,
that's better than the other ones. So we'll slide that one in. Now, I know it's probably not the
smartest idea to swap. Would we just swap five or six different tubes? But it's better to do it
before you align it. So why not? We know that the thing works. So if we come up with, we've got a
problem and it doesn't work now, then we know that one of those tubes I swapped in is bum.
But we've got stronger tubes in it. So what I want to do now is turn it on,
bring it up, and see if it just seems better just from swapping the tubes. It would be more
fun to do that after you swap each one tube, but this video is already way too long. Well,
she still works. I have a PSA that's, I don't know what, 0.1 today. It doesn't have to stay that way.
One of our most famous radio listeners, Steven from Connecticut, I'll tell you about his PSA,
All right. So I think it's way out of alignment now.
Okay. I'm going to turn it way up and just see how much volume we've got. Okay.
Okay. So that's basically about all the way. Okay. So that was it probably like 2.5.
Okay. So we've got volume up to distortion. I need to clean these pots, obviously.
All right.
What in the world? Okay. Well, I guess 1110 is back, but it just plays this loop.
I wonder if they're playing that on 1110. That's awful high on the dial to be 1110.
I guess this can move. Maybe we had it farther that way before.
But still, that's almost 1300. No matter where you are, Belmont, Valentine,
Lake Norman, Lake Wiley, WBT's loud and clear on 107.9 FM. News, talk, traffic, weather, sports,
live and local. 107.9 FM WBT. Your city, your station.
All right. So it's coming in really strong at 1290.
Okay. So the reason I thought it was off the air is because I had other people tell me that
it was off the air. I had other people mention that they turned off the transponder and even
this little loop wasn't on. And I've only been checking it on this radio. So I wonder if I've
just been missing it the whole time. But anyway, the only reason that matters is because that's
what we use to tell if the radio is working. You can get this with anything. Well, maybe
they're still doing something with the signal then. Okay. We are topped out there.
So that's 1600 right there. It won't even go any farther physically.
Yeah. We got some serious crap going on. So that's it. Now that could be, you know,
there is this gimmick here that makes the push buttons work. So I wonder if that's keeping it
from opening as far as it wants, or if that really is the physical extent of it. I can't
tell. It looks, it looks like it will turn a little farther and I got to, yeah, see if I could
slip, but I hate to do that. So the way that you adjust those is you turn it all the way meshed
like that, which puts the screw aiming down. And then you can, you can put a screwdriver in the
bottom of the case and turn that screw, which loosens the push buttons. And then there are
little cams on the push button kind of get electro killed here. There are little cams on the push
buttons. Yeah, there you go. That are set at different areas. And basically when you push
this push button down with that screw loose, it moves the cam to the exact place that it will be
when you push the button down. Then when you tighten that screw back up, it holds the cam
in place so it can't move. So now whenever you press the button, like it automatically moves it.
Uh, well it's not right now. I wonder if it won't because we don't have,
we've got it meshed all the way. So they had WBT maybe set as this one.
Okay. Interesting. Okay. So, uh, I think it's time to align it and then we'll worry about the
push buttons and all of that and figuring everything out, but let's get out the alignment
instructions and see what we can figure out. All right, before we align it, there's one other
thing I want to mess with. Uh, the, the dial lamp is pretty dim and I've been having that
problem on a lot of them. And, uh, this 22 Ohm resistor here, that's a special tap coming off of
the, um, off of the rectifier tube to make that dial light work. It's a 58 Ohm because it's cooked.
It's cooked folks. Well, I'll get it out of there and show it to you.
It's right there in the middle. It's that little one. It's cooked. All right. So I'm going to swap
it real quick. I don't have a 22, but I've got a 27. I'll be a lot better than 58. Uh, I measured
the voltage on the bulb. It's 4.1 volts right now. So we'll swap this resistor, see if that
bumps that up, makes the lamp brighter and, uh, that'll fix that problem. Then we can align it.
All right. Well, with the new resistor, the voltage is about the same. I tried a different
35, uh, Z5, same thing. So I don't, it's like 4.16, 4.19 volts. Uh, and you can see that the
part of the problem is this diffuser, but even if the whole thing was nice and clear and white,
I mean, you got a hotspot here and nothing over there. I've tried moving it up and down a little
bit to make it nicer and more even, but no dice. I'm going to do a little research online and see
what people usually do in that instance. And if it involves putting an LED in it, I'm just going
to live with it the way it is. Cause I don't like LEDs. I would rather it look like this than have
a LED in it personally. Now, if you like the LEDs, you just go right on ahead and do that.
Okay. So alignment procedure, refer to chassis view, output meter across 3.2 Ohm output load.
I'm just going to use my ear. I know you're supposed to use a meter. I'd prefer to use my
ear. Volume control at maximum. I don't have it at maximum right now because I can't talk
over it is so loud. Uh, connect ground post of signal generator to the B minus of the radio.
I did that. I've got the signal generator on an isolation transformer, uh, align for maximum
output, reduce input as needed to keep output near 0.4 volts. Okay. We want to be on 455. Now
on this signal generator, it says 450, but I've checked it before. And that's about 455,
455 dummy antenna 0.1 microfarad. That's what I've, I think that's what I got.
That's what I've got on the signal generator. I believe that's correct.
The stator of the antenna section of the gang. That is the antenna section,
a rotor full open plates out of mesh. That's how we've got it,
which should be like 1600. But again, we can't quite get up to that, but don't some of these
not quite go to 1600. I don't know where I'm getting 1600. I guess I'm just going by what
it says on it. Let me see if it mentions that in here. Um, uh, it doesn't mention it. I don't know.
I've heard of some that only go to 1540. Is that correct? Which is about where that would be. So
maybe that, you know, 1540 sound right. Okay. Uh, tremors adjust for maximum output and orders
shown tremors on output and input IF cans. So there's the output can, there's the input can.
So I'm going to adjust those, see if I can get that louder and we'll go from there. I've got,
by the way, I've got the signal generator down about as far as it'll go.
So there's the volume all the way up with the signal generator as low as it'll go.
I wonder if I can, yeah, I can't make it any lower. So I was able to get it significantly louder.
So I think we're good there. Uh, then we need to go to 1600 rotor, full open plates out of
1600 and we're not at 1600. Uh, and then oscillator tremor C7. I'll have to find that.
Okay. So what I did was, um, since we have some kind of mechanical thing, keeping us from going
to 1600, I just set it on 1540 and just trim tone, uh, tune the oscillator into 1540. I don't think
we've got anything above that anyway, on this dial locally anymore. Um, and then it wants us to do
1400, but connect to the external antenna clip and adjust the antenna tremor. All right. So I
did line it up pretty good. So it's 1110. We're pretty dead on it. Um, but there's just not a lot
on there tonight. Like it's, it's not, that antenna is not doing much. So of course we're
getting this one pretty good. And by the way, that, um, it's so loud, the ABC won't really
tone it down enough or lift up everything else enough. I don't know what that is. 1150 maybe.
That might be worthy of a preset. And that's the top of our particular dial.
910 maybe. Okay. I just said 890. Okay. Okay. That's probably WSN. So that's about 615,
but it's 650. That's a little off and you can't, I mean, you can barely hear it. So
if we were in the case, you might be able to turn the case a little bit to get better reception.
It's so quiet on the bottom of the dial, but it's just because it doesn't have a,
there's nothing there. There's just not a lot on it. Part of it. So this antenna,
the trimmer screw was missing on the antenna. And that's because if you've got it backed all
the way out, that's when you get the best reception. So I guess they just completely
removed the thing. Um, but yeah, I can't get it to do too much. I mean, it's all right, but
I think it just said 1020. Ooh, we're getting some music from Pittsburgh.
Can't quite get it. I got to go through that one quick. Cause it's so loud.
There's coast to coast on. It's a rainy night tonight, so I don't know. Maybe it,
maybe it'd be better on a different night. Oh, that was probably the,
the bump in music on coast to coast. Oh no. I don't know. I don't know if there's something,
if I understood better how the segments of the design work, I could try subbing in some
other tunes to see if it, uh, would make it more selective. Cause you've got the RF amp,
you've got the converter, the first IF amp, there's a second detector and the ABC,
the first audio, and then the power output, which I guess is the second audio.
Seems to me like the ABC isn't working right. Um, so I wonder if that's telling me that this 12 SF,
SF seven ain't quite right. Maybe I'll try just swapping one in just to see if it makes it more
selective or not. And if not, we'll just swap it back. You know, really you should align it if you
swap some tubes, but I don't want to just keep realigning it and everything. But, uh, let me
just as a, as a test trying to learn, let me see if I, if I swap this 12 SF seven,
if we get any different results. All right. Well, I was looking at the wrong schematics again. So
I found a 12 SF seven, but this radio doesn't have a 12 SF seven. I was looking at the wrong
schematics. The reason I was looking at that one was because it explains what each, uh,
tube is doing. And this one doesn't say you can figure it out, but I just,
I'm, I'm done messing with it. Okay. So I put it back in the case. You can see how nice of a
looking radio it is. And, um, you know, an indicator lights up decent, I guess. Um,
why don't help? We've got too many lights on. Um, but I want to do the push button thing.
So it tells us right here, how to do that. It says setting the push buttons,
the push buttons may be used after proper adjustment for the automatic tuning of any
six stations, which you, which you select turn on the radio, push out the call letters of the
desired station from the call letter sheet supplied with this manual. Of course we don't
have those. Uh, and then those that will go, I guess in that little trough there,
that's pretty cool. Actually, um, rotate the tuning knob to the left counterclockwise,
as far as it will go. Yeah. See, our, our, I think part of our problem that we shouldn't be
able to go that far down. Um, the line has slipped and it may have something to do with
this adjustment that we're doing, but we've got it aligned to how it is right now. Uh,
on the bottom of the set is a hole through which the push button locking screw can be adjusted
with the screwdriver. Check to see if the screw is loose. If it is not turn it several turns to
the left and return the set to an upright position. So there's that screw. I knew we would
be able to access it because I, when I looked at the chassis, I could see where it was. And I knew
that big hole was in the bottom of the, um, set from the first video. So I've loosened that up,
press the first push button down all the way with one hand, hold the button down firmly.
And with the other carefully tune in the desired station, release the push button. So there are
little eccentrics behind this. And so basically you're turning the knob until it's at a certain
spot. That eccentric is in a certain spot. And, um, once you tighten the screw back up,
when you press that, it will just move that eccentric back to the place that it was at.
So I got to hold this down and then tune to whatever station I want. Press the first,
push the button down all the way with the other hand, hold the button down firmly.
Oh, you know what? It went a little more. I just moved the eccentric, uh, down firmly. And with
the other carefully tune in the desired station, release the push button. Okay. So let me do that.
Okay. So I tuned to six different stations. This one was kind of weak though.
So let me, uh, turn it off, tighten the screw back up and then see if it holds the
setting. All right. So I did it. We are at the bottom of the dial. Let's see if any of
these will work now. So the first one, that was interesting. When it's at the bottom of the dial,
it can't do it because I guess that's, it's like setting position, but if you're anywhere else,
it'll jump around. So the first one is WSM 650, but it's at about 620 on the dial.
Okay. The second one, 107.9 FM WBT your city, your station is, uh,
uh, WBT here in Charlotte, which I thought was off the air, but apparently not.
It's just playing music. Oh, on loop telling you to listen to FM. The third one,
there's something there, but it's like kind of coming and going.
Fourth one. Oh yeah. It's just barely, it's not that far away.
There's something there coming and going too.
Okay. So an external antenna might help me. Um,
but I think that's about as good as I can get it. I like that. Uh,
the presets work so well though. That's crazy.
That's impressive. Um, what a beautiful radio. I just think it's a really good
looking one too. So I like it, but I'm going to keep it. It doesn't tune that great, but, um,
maybe, you know, I learned a little bit in this video. Maybe I'll learn more as time goes on
and then I'll come back to it someday and get it to perform a little bit better. Maybe it'll
be obvious to me then what's wrong with it. When I first started working on pinball machines,
I didn't know how to fix them either. The very first one I had, I couldn't fix. I sold it not
working after messing with it for like a year. And then the next one that I had,
I got it pretty much working, but there was a couple of little things that wasn't right.
And then the third one that I had had one little issue that I couldn't figure out.
And then pretty much every one of them I've had since then has been about as good as it
needs to be whenever I sold it. So, um, the way it's drifting in and out of signal, that makes
me think it's an antenna thing, you know? And like I said, it's an overcast night, it's raining a
little bit, and I don't think you get too good of a signal whenever it's wet out. So, so there you
go folks. Let me know what you think about this. True tone. And, uh, we will see you on the next
video. I think on the next video, we might work on a record player. I haven't messed with one of
those in a while. Um, I've got a bunch of stuff. I'm going to do a TV pretty soon too. I'm gearing
up to do a TV. I've got a really cool one that I've already filmed some video of, but I haven't,
uh, I haven't put the video all together yet and I haven't started working on it,
but we're going to be doing that soon. So stay tuned here at Amateur Repair Time.
