Man Says He Can't Fix Sagging Door Then Does It Anyway...Part 2

VideoJoeKnows
63 followers
1 Video View·Feb 20, 2026
@VideoJoeKnows
Man says he can't fix sagging door then does it anyway...Part 2 is what this DIY howto video is about. VideoJoe is right in the middle of fixing a sagging door in a condo & he's not going to stop fixing this sagging door until he's done. Does VideoJoe work on sagging doors all the time? No...but that's not going to stop him from fixing this sagging door either. Watch & learn as VideoJoeShows you what VideoJoeKnows...man says he can't fix sagging door then does it anyway...Part 2. Nice!
https://www.youtube.com/user/VideoJoeKnows
AI Generated·May contain errors
Okay first things first I'm going to put the inch and a quarter screw in there with my drill
and I ended up replacing my other drill this one is a lithium see this lithium 18 volt that's what
you want and I'm using the ryobi I really like these it's you can get this whole thing in a set
with this to charge batteries a charger it also came with a flashlight a little
little uh cut off saw and a little sawzall all that with a bag even I think I think I got it
for $179 for everything all right that looks perfect the color of the screw head is fine
it's in there flush and all okay I'm gonna get back in here and I'm using inch and five eights
I just want to make sure I don't put it in really super tight I want it just snug
or else it's going to start spinning because this is only going to tighten up in the jam
because if you remember if I go straight in there these screw locations are going to be
within a half inch from this edge and that's where the sheetrock is you got half inch of
sheetrock then the two by four another half inch of sheetrock over here and then your jam
is that full of measurement okay so first going to take that to there and I'm going to see
if it spins what happened to my screen driver what happened oh here it is look at that it's
still spinning I'm not liking that what that means that means this one's going to do the same
thing if I get something with too big of threads the head is going to stick out from there I'm not
going to like that either okay so that's not going to work I guess what I am going to have to
do now is I'm going to take the door off the hinges and I'm going to put them in at a slight
angle I have to and because I'm going to do that I'm probably going to have to use the two inch
screws well you're getting your money's worth here
because I first have to get this door off the hinge pins get my screwdriver
okay I'll have to take a look at this on the other side
and take a look at how I'm going to get the pins off well let's let's look at this first sometimes
sometimes there's a little trim piece see that see that nib right there so I got to get a nail
or something small enough to go up in there sometimes it doesn't have this and you can see
and you can put a nail set up in there and you can actually see the bottom of the hinge pin
because it doesn't have this and see this one's tight so I can't grab it with a screwdriver
without messing it up so I've got to I've got to hold something underneath there dabbing at it
and they're all the same of course okay nothing nothing is easy and if you're not a
handy person might say see that's why I never do anything on my own I just soon call someone but
hey you can do this project you just watch the steps that I'm going to go through you don't
have to pay someone to fix your sagging door they come out here and gladly take your hundred
dollar bill out of your pocket they'll snatch it from you I don't want that to happen once you start
fixing these things on your own that's what my channel is all about okay here's what I'm going
to do remember I told you I had some six penny and four penny nails I'm going to shove that up
there because it's small enough I probably should cut the tip of this off and I think that's what
I'm going to do okay so I'm going to cut that off like so we'll have to find that see now I've got
just a flat bit and then I can hold this upside down like that and put it in there and then beat
on this and actually hit right here with my hammer so I don't get up there and mark up the door okay
that's that's what I'm going to try to do okay so what I'm going to do is just pop the hinge pins up
enough to then get them out with a screwdriver the most important part of the project protect
your ears so I have just some toilet paper if you have some earplugs put your earplugs on
but if you don't these work really good for ears and my ears are kind of sensitive nowadays because
one time I tried to take out a door jamb kind of like this but it was metal I was just banging
it out with a sledgehammer and my ears were ringing for days this happened probably 20 years
ago and ever since then when I start pounding on different things my ears get slightly sensitive
okay so always try to protect those ears okay let's get you situated over here let's see if I can't
get this out get that pushed up in there like that hang on to this
get that the hinge pin is up now I can tap that out with a screwdriver let's say
okay let's get you in there let's see see there see how far I popped it up
oops trying to do this one-handed okay so now I'm going to do these other two hinges
same way I've got this held up that held just like that
up tight and I don't necessarily tap on the nail I can hit right there as long as I've got this
squeeze together good one that's it I had to do a six penny nail did the trick yes indeedy
okay I'll have to keep that maybe for my next time okay so now I can just tap that out with
a little screwdriver starting at the bottom I always take the bottom hinge pin out first
onto both nail or screwdriver and the pin I'm holding on to it now I can set it off
lots of times those are greasy too so if you have you have good carpet or something
be careful with that see all that grease last thing you want to do is put that
on your carpet or something okay take that off and more times than not the door is going to
stay up and on its own I do have the door propped open a little bit
and where is my rag my trusty rag to wipe my fingers off with I'm going to have to go get
that because see I want to wipe that off for us you know what's going to happen I'm going to get
that all over the door I usually carry a rag in my tool oh here it is here it is
so I just had my nail bag repaired and I put this rag in a different area in my nail bag okay
so now I can gently pull this down lift up on it yeah and slide this out of the way like so
now can you see I can work on this hinge I can angle in screws this way but I'm going to have
to get a drill bit first and drill in there aren't I and in order to do that far enough
I probably should take this hinge pin or this hinge out again it's only got the one screw in
there now I can work on that find my drill bits now I've got the two inch screws I got a
screwdriver drill bit just a hair smaller than the threads of this so that I can
drill it in at a slight angle okay that's my next step
