How to fix a sagging door

VideoJoeKnows
63 followers
1 Video View·May 21, 2026
http://www.VideoJoeKnows.com How to fix a sagging door....can be done by you......yes I said you. Fixing a sagging door doesn't really require that much skill. You just have to know what to do & you can do it! Sagging doors come in all shape & sizes. If you know how to fix one sagging door, chances are, you can then repair any sagging door. What do you know? You know to watch "joe" for all your home repairs....that's what you know lol!
http://www.VideoJoeKnows.com
Ooh, you see where that hinge is? This hinge, we've got to push that in. See how it moves and flexes right there?
As you push that, that's pushing this tighter, that's taking this and pushing it back up like that.
And that'll get my sag out of there, so I've got to somehow push that in.
You remember, from this edge over, half inch to five eighths, depending on what thickness your sheetrock is,
I can't really put a screw in there because I need to take long screws because I'm going to suck this door jamb up closer to the 2x4.
And the only way I can do that is if I put a screw right about there and one about there.
Okay, three inch long screws so I can drive that in. I only need to push it in a little bit.
But before I do that, I'm going to take my drill and pre-drill.
Now I've drilled right into the 2x4 and I felt it, and I can put it in a slight angle so I know I'm getting into the wood
without hitting the back edge of my drill on the door.
Okay, now I can put that screw in. I'm going to try to put it in on low.
I got it set on low. Let's see what we can do here.
That felt good. I think I sucked it in there.
Now I could put the whole hinge back like that, put the screws back in and all that and try it.
Because one screw might have done it, but you know, I'm going to put a second one in there.
I like to do that and that way this one can kind of help give it just that little bit more oomph.
I'm using three inch long coarse threaded sheetrock screws for this.
Okay, now this stud feels pretty hard there, a little bit harder than this top screw.
So I'm going to back it off and go at it again.
I want to get it in there all the way.
The last thing I want to do is snap that off because you can do it.
Oh yeah, I know.
I think that pushed in because there's where a little finish nail was right there.
I can barely see just the tip of it.
I have not closed this door yet.
The beauty of my videos is you see it as I do it.
Let's check it out.
Oh yeah, I like it.
Look at that nice gap there, shall we?
There's a good, oh, three thirty seconds and that's about what you need.
I'm looking down this angle and I got about the same all the way down.
Look along the top of the door and that has raised that up because it's pushed that up.
You see, I took that door and I pushed it over this way and that lifted this side up
and pushed that side over and moved the bottom over that way.
And we'd be fixed.
Wow, that's nice.
You know what?
I wasn't even going to do that on this project because that wasn't even on my list of things to do.
I did that for your benefit.
That's it for this project.
But I'll see you next time with more videos.
