http://www.VideoJoeKnows.com How to fix a sagging front door is easy...when you know how. Front doors are heavy & you couldn't figure out how to lift the door back into the proper place so what to do. I guess you could call a handyman & pay him to come out & tell you you'd better have him replace your entire front door since......blablabla yea you weren't listening anymore after he said your sagging front door needed to be replaced. All you saw were dollar signs floating around your head. Doesn't he know you can't just go outside & pick money off a money tree?!! Every time I turn around someone has their hand in my pocket......& it usually doesn't feel good!!!! If I could just figure out out to fix it myself I won't need that handyman/boy for this. Good thing Joe is here to show me how it's done. He usually always comes through for me come to think of it. How to fix a front door sag should be easy....& now it is...! http://www.VideoJoeKnows.com
AI Generated·May contain errors
Good golly Miss Molly. Look how much this door is sagging
Look at that
The door is rubbing on the edge of the jam. Look how big that gap is. It's amazing
Let's see. Here's what's happening
Right here. You open and close this door
First off, it's rubbing at the top. Secondly here, you think it's closed, right?
Is that closed?
Somebody can come right up and pull on it because with the door sagging this has moved this latch down
further than the strike plate notch
pocket
So see it's closed right there. If I lift up on it
Hear that? It clicked
That's because I'm in the pocket now
But before you think all you got to do
Is fix the sagging door
You know
I've got videos on my channel that show you how to fix sagging doors and I'm gonna
Go ahead and take that hinge off
you know the other side of the door and
I'm gonna put some screws in there and try to suck
Everything over further and put some other screws in there and try to raise that
But there's no way I can raise it that high. You know why?
Sometimes you got to look at the outside of the door as well and let's look on the outside of the door
Look at this door
See the gap here on the actual door right there
Here's it. Here's another gap
Right there. Look at that
Look at bottom. There's another gap there. That's because this is on the Sun side
of the door the doors separating now, can you see
That's the other reason why it's sagging
That's the other reason but I can fix it to a certain extent
I can do a little bit of magic over here and get it a little bit better other thing you can do
It's take the pocket and the strike plate is
See right here. You can ream this bottom edge out see where it's where it's been rubbing right there
And there's the latch from there
to there
Take a reamer bit and ring this out just a little bit lower
And you can get a little bit more time out of this door, but ultimately you're never gonna fix it all the way
until
You replace that door
That was just a quickie for you. That's all the time I got. I'll be back with more
videos
Okay, this is just a quick follow-up
video
Look at the gap here that I have now look at that. Okay. Yes true. We still have the gap at the top
Still have the gap at the top. Look at this nice reveal on the side
And that reveal is the same all the way down. It's the very same
Now, how could that be most sagging doors?
You know, if you've got the gap like that, you will not have you got a nice even gap
You will not have that ugly nasty gap at the top. See how good see how high it is from there. Ooh
Almost down to nothing over here
Well, that's because this door panel system if you were watching that
Closely you see this is a panel door system. You've got all kinds of parts to this door
Well because of the Sun and everything because it's separated this panel is actually
Lowered down because this panel is separate than all these other ones. So this has pushed down this is pushed down
So the door in a sense kind of slid the top left didn't do anything this kind of pushed down
That's why it looks like it's sagging there
It's not the actual whole door sagging because if I on a regular door if I would have lifted that up that far
That would have moved this whole door like this and it would have moved it up. You wouldn't have this nasty gap at the top
Okay, but I was able to get it way better and let's do the test the door closed test
I've got plenty of gap down there now because I was able to take this and
Moved it over a little bit and I did it with my trick. I took that top hinge off
I pre-drilled some holes put some three inch
Screws in there drove that door jam over to the left a little bit then put in
the hinge again and put some screws in that hitting the wood stud behind there and
Not just the sheetrock area
What I mean by that
Okay
See these two screws here
I could have got the galvanized screws
But I kind of angled those and in here from here over you've got the sheetrock on the inside
So see these two screws I put long screws in there. I would hit I would miss
The 2x4 2x6 behind this is about right like that
See, it's about that wide
Right. So no matter what these screws are not hitting anything
I would have had to drive those way over at a far angle. These two are
Long three inch screws running right into the stud, but I took that whole thing out
I pre-drilled three holes one there one there one up there and then I ran those into the stud pre
pre-drilled
Pre-drilled it with a small like quarter inch drill bit and then I ran three long three inch screws into there
suck that in a little bit tighter up against the stud and
Then I put these surface mounted screws right in there to kind of at a slight angle and
Put that in that sucked it way up
That's how you do that
Look at that
Clothes is nice now at least for the time being I mean it later on down the road
Somebody wants to fix this door. The only real way to do it. I'd say is to replace the entire door
It's just gonna be very difficult if you're not a door person with clamps and all that
You'd have to take this whole door down take it to a door company
They'd have to release all the edges
Unglue it basically rebuild it clamp it make it square right now. The door is not square. Is it?
This whole this whole edge is sunk
And that's why we're having that issue. Okay, but for the time being we're good