Saker Mini Electric Chainsaw

House On the Mend
25 followers
Feb 2, 2026 #saker
In this video I unbox, test, and review the Saker Mini Electric 20volt Chainsaw.
Saker Mini Electric Chainsaw: https://amzn.to/3ArDM2L
Video Chapters:
0:00 - Intro
1:00 - Unboxing
5:25 - Charging the Battery
6:15 - Lubricate the Chain
7:25 - Testing the Chainsaw
14:15 - Conclusion
Camera Gear Used:
Nikon Z50: https://amzn.to/3n6vkf8
Rode Wireless Go Lavaliere Microphone: https://amzn.to/2GHU237
Views and recommendations expressed are my opinion based on hands on testing, experience, and results.
Email me at: [email protected]
#saker
AI Generated·May contain errors
Hi, I'm Mike with House on the Mend.
And in this video, we're gonna be reviewing
the Saker 20 volt mini electric chainsaw.
So let's get started.
If you break it, he will fix it.
If you buy it, he will build it.
House on the Mend.
Now I'm not paid nor sponsored by Saker.
Full disclosure, they did send me this unit for free
for my independent review.
So let's unbox it and see what you get in the package.
All right, let's see what's in the box.
The manual, you got the charge cable.
It's like one battery, the saw itself,
and then a wrench for the chain
and a little Phillips screwdriver.
All right, let's go over some of the features
of this mini electric chainsaw.
Now, the first thing I noticed is when I put the battery on,
the saw is very well balanced
and the grip has a rubber around it, feels really good.
Let's get a little sound of the motor.
When it's functioning, you press this safety button
and then pull the trigger.
It's pretty loud.
So you're gonna wanna have a hearing protection
when you're using it.
Now, for left-handed people like me,
I would have liked to have seen an ambidextrous safety.
But the safety button on here is shallow enough
that you can either push it
and start it with a different finger,
or even with the center part of your finger,
push that button in and overcome it.
So you can still use it as it's meant to with one hand.
This top cover here is spring-loaded,
so it will move out of the way
as you're going down through a branch
and then immediately flop back into place after the cut.
That's nice.
I like and don't like this carry handle here,
this wrist strap.
The thing I do like is they were smart enough
to not make it long enough where it could get caught
or tangled in the chain.
However, it really is so small
that my hand just barely makes it through
and absolutely would not if I was wearing gloves.
So to use this wrist strap, I have to put my hand through
and then I'll have to don my gloves.
Now, both the chain cover up top
and this little safety handle
meant to protect your fingers from brush
as you're getting in to make a cut are pretty well-made,
good, robust plastic.
The directions say that in the center of the bar,
you should be able to pull the chain out
two or three millimeters, and that is proper tensioning.
And as you can see there, I'm easily able to do that.
So it's properly tensioned.
If it wasn't, however, you would loosen it with this wrench
and then on the opposite side, right here,
you would go in with a Phillips screwdriver
and tighten or loosen the tension.
Once it's at the proper point,
then you would retighten this bolt.
The unit comes with one battery.
It is sadly a 1.5 amp hour battery.
I would have liked to have seen that be a two amp hour
battery.
I would also like to see some sort of charge indication
which this battery does not have.
Speaking of charging, the unit doesn't have a cradle.
It instead has this jack that plugs in to the top
of the battery for charging.
Now there is absolutely no mention of how to charge,
how long to charge, anything like that
in the instruction manual,
but I'm assuming when we get to that point next
that we will have an LED indicator right here,
letting us know the state of charge.
The instruction manual is well-written
as far as it is grammatically correct for English.
There are a lot of superfluous safety warnings on here
that don't apply to this particular chainsaw,
such as always carry it by the front carry handle,
which this little guy does not have.
So it's clear they cut and pasted some safety warnings
on here that don't even apply to this saw.
And I would have liked to have seen that be a little bit
better thought out and edited.
A couple of takeaways that do apply is that
they do not want you to cut anything more
than a four inch branch,
and they warn you not to over press down
and stress the saw when making a cut.
Now with the unit turned over this way,
we can get a proper reading with my tape measure.
And as you can see,
the actual cutting length is less than four inches.
It's about three and three quarters of an inch.
So it makes sense that they don't want you
to cut anything more than four inches
since the little bar isn't even four inches.
All right, let's charge the battery
and see how long it takes.
Okay, as we can see,
the plug is green when nothing is plugged in.
I'm assuming it's gonna turn red
when we plug it into the jack here
and then turn green again once it is fully charged.
Let's take a reading.
The battery is currently 80 degrees Fahrenheit,
26 degrees Celsius.
Let's plug it in, see how long it takes.
All right, a little over an hour and 15 minutes
to complete the charge on what is a pretty small battery.
The LED indicator does in fact turn green
once it's fully charged.
And we only raised a couple degrees.
So one of my biggest complaints
with electric chainsaws has been
the ridiculously small bar chain oil reservoirs
used to fill them up.
Now, Saker has taken care of that
by not even having a bar chain oil reservoir
on this little saw.
All you have to do is simply lubricate the chain
and the chain itself.
The only pointer they give is
if you're gonna be cutting fruit trees,
they recommend vegetable oil
because mineral oil can damage fruit trees.
So with the battery out for safety,
we can lubricate the chain.
Now, I suppose you could just take some WD-40
and just spray it right on there
and move the chain around and you'd be good.
I'm gonna actually use this three-in-one oil.
It's got a little bit more viscosity,
meaning it's a little thicker,
might hang around on there a little bit more.
The directions did say to lubricate the chain
in a manner that some of the oil gets into the bar as well.
So I kind of interpret that to mean
just pouring a little on top,
letting it sink down into the bar.
And then you can just grab the chain, move it.
And it's so small, you only have to do it a few times.
All right, I think we're ready.
Now, if you're able to support the branch,
which is probably gonna be the case
for most of your cutting with a chainsaw this small,
then you can cut straight through.
If, however, the branch is pretty long
and it's going to fall,
you're gonna wanna make a relief cut underneath first
and then come over the top
so as not to tear out the tree branch.
All right, eye protection, ear protection, and gloves.
Oh, this soft pine is nothing for this little saw.
Quick and easy.
Well, here's an example of a thicker and longer branch.
And so let's demonstrate how we would do
that safety undercut to prevent any tear out.
I would just come up to it,
support the weight as much as I could,
turn the saw upside down, give a little relief cut.
And now I can come up over the top.
And that's a heavy branch.
So that's the smart way to go with a heavier branch.
Now, I always do my pruning in the fall or winter
when these trees are dormant.
It's better for them to heal.
But sometimes it takes them being fully leaved out
to see that they're weighed down
and pushing against your block wall.
And I don't want that.
So I'm gonna get in here and make a quick cut
on this guy that's encroaching.
Much better.
Now, speaking of encroaching the walls,
this little guy here self-seeded from a tree
right over there.
And these root balls can get pretty aggressive
and do some damage to the foundations
that these walls are built upon.
So I'm gonna cut this guy down again.
I think I'm gonna have to dig out this stump or burn it
because it keeps growing back.
Well, I just had to switch out the battery on that camera,
but not this little chainsaw, it's still going.
All right, here's another example of a tree.
I love this green ash tree in our backyard.
And I prune it pretty regularly
so that I can walk underneath it.
I'm six feet tall.
But when it gets fully leaved up,
it gets weighted down and now it's an obstruction.
So time to make a quick little cut right here.
Now this guy, I think I can support.
So no relief cut.
I'm just gonna get in here and do it real quick.
There we go.
Ah, much better.
Well, here in Las Vegas, it gets ridiculously windy.
Today is no exception.
It's early in the morning already.
We got a breeze going, but this poor little branch here
was the victim of our last windstorm.
So I'm gonna come back here and cut it back.
There we go.
Pretty respectable burn pile.
Now in the past, I've always used a Sawzall
to trim my palm trees,
but a Sawzall is really meant to be used with two hands,
whereas this little unit is meant to be used with one hand.
So let's see how we do with it.
Well, you definitely want to approach it
the opposite direction
so that the motor here is facing on the outside.
That'll, otherwise it obstructs your ability to cut.
So as you would expect,
it had absolutely no problem trimming up
this little palm tree.
I planted this little ash tree here at the Arizona house,
but sadly it died.
So rather than dig up the root ball and everything,
I think I'll just try cutting it off.
Easy.
This is African sumac.
An extremely hard wood.
Check out this video link
if you want to see how much the Black & Decker
and Ryobi electric chainsaws struggled to cut this wood.
This is gonna be a good cage match style test
on how this little saw cuts through hard woods.
Now, same battery, first charge.
I did re-lubricate the chain
cause I don't want to burn this poor guy up
on this nasty wood.
But let's see if it can handle it.
Ow, you heard it struggling, but it made it through.
That is impressive.
Well, I haven't had to clean this chain guard out even once.
The closest thing to any debris being stuck in there
is this little bit of wood.
Well, we just weren't able to wear this little battery out,
but let's see how long it takes to recharge
after a full day's cutting.
Well, only 40 minutes.
That's half the time of the original charge.
Absolutely no change in temperature.
Well, that's my review
of this little Saker mini electric chainsaw.
And I'll tell you, I am very impressed.
A full day's cutting at two different houses
all on one battery charge.
So the build quality, battery life,
and the power are all exceptional.
And due to that, I would have absolutely no reservations
recommending it to you for home use.
So if you found this video helpful,
you please give it a thumbs up.
It really helps the algorithms to start suggesting it
to more viewers like you.
Also, please consider subscribing.
I work really hard to put out good quality content
and there's more videos to come.
I'm gonna leave a link to this saw
in the description below.
Full disclosure, that's an Amazon affiliate link.
So if you click on it and end up making a purchase,
it won't cost you a thing,
but I do get a small reward at the end of the month
that helps to justify the time and money it takes
to set up and do these videos.
Until next time, thank you for watching.
Now, just because he's really small,
I'm not gonna tolerate any bullying of the new guy.
