Hi, I'm Mike with House on the Mend. In this video we're going to be reviewing the Garden Joy
24 volt cordless pressure washer. So let's get started.
Now I'm not sponsored nor paid by Garden Joy. They simply reached out and sent me this pressure
washer for my independent review just like the reciprocating saw a few videos ago. So
let's unpackage it and see what comes inside. All right, here's everything that comes inside
of this really nice nylon case. It has molded spots for the pressure washer,
the battery, if it had a second battery would go here, the charger, and the soap bottle.
And it fits in there really snugly. It's pretty impressive. Everything else
needs to be stuffed inside this cavity, however, so when you open it up
a lot of stuff jumbles around. But let's go through everything. First thing I want to put my
hands on is the pressure washer itself. The entire outside of it is rubberized and really
smooth, dense plastic. That might be the thickest, nicest kind of polymer
plastic I've put my hands on in a long time. I like that a lot. There is, while you would need
a safety, I'm not sure on a pressure washer, maybe just so you don't shoot your eye out,
but nonetheless there's a safety release on the left side. So it's clearly meant for
a right-handed user. I would like to see something that is ambidextrous. The unit comes with four
attachments to the front. The first one being the soap dispenser. So you would fill this with
soap and water and out of the front here will spew out a nice sudsy mixture. Interestingly,
this doesn't connect or join with the brush attachment. So I guess you suds down first
and then brush with only water. That's a peculiar choice. I would have liked to have seen
the soap dispenser connect to the bottom so you can soap at the same time you are brushing.
But nonetheless, we'll see how that works. The second one is not immediately identifiable as to
what it is, but the manual says it is the two-in-one nozzle. And so if you look right here
on the front, you will see that as you twist it, these two thin pieces of metal come together.
And inside there is one single nozzle. So I'll be interested to see what kind of pattern that makes.
Probably the most common used nozzle attachment will be this one that has six different settings.
The interesting thing that I've never seen before is there's no markings other than little lines
where you could see them if you're wanting to twist it to a certain setting. Instead,
you have to look directly at where the water would come out under high pressure
to see what setting you're going for. And even those markings, as you can see here,
are on either side of the actual nozzle. So you're not going to know which one necessarily
you're at. I would have liked to have seen those markings right along these hash marks,
as in every other pressure washer with this kind of attachment or a hose sprayer
nozzle that I've ever seen. So that is a strange design choice.
Back to the brush. I'm really excited about this. This will be the first
one of these pressure washers I've reviewed that has a brush. And it's got a nice little
plastic cover here to go over the bristles so they don't get all twisted and messed up and crushed
during storage. Over here, we have a collapsible bucket, which looks like it holds maybe two
gallons of water. So I won't be using this. I'll be using a five-gallon bucket. Otherwise,
we'd be making a lot of trips back and forth through the faucet. But it is kind of cool
that you get that as a backup. And then something I've also never seen before is a shoulder strap
for the pressure washer. And in the front of the manual, it shows that that would strap
right here. So I guess you can shoulder it, use it, and then sling it while you're doing some
other task instead of setting it down on dirty ground. So I'm going to try that out. I'll be
interested to see how wet we get shouldering the pressure washer. And then one of the most
important things that has been overlooked in other pressure washers is the hose. And I can
tell right away just from feeling it that I am going to like this hose. It is very supple. It
straightens out easily. Soft and pliable. This is a great quality hose, and you get 16 feet
of hose. So this end here with the screening material will go into your bucket or other
water source. It has a kind of high-pressure metal clamp here rather than any kind of screwed-on
fitting, which is fine. The build quality of this little filter screen is very different than the
pressure washer. It's very unfinished. I can feel jagged pieces of metal, and it's also warped
on the bottom. But the screen material all looks fine. Oh, another thing about this,
look how big it is. It is the size of like a tangerine or so, but you're going to,
if this is setting in the water, it's big outward like circumference-wise and then length-wise. So
you're probably going to have in a bucket a good half a gallon of water or so still left in the
bucket when this guy stops drawing because it's quite big. The other side is a quick release,
which I like to see. You pull back and put it right onto this spot right here. Let me pull
off this little red cover and show you. There's a nice fresh o-ring right here that I'm going to
want to lubricate. So you pull back, connect. Nice, that is a nice fitting. Everything feels
really well made with the hose on this end. To disconnect, you simply pull down on this section
and it comes right off. The unit comes with one 3 amp hour battery, which is a nice size for a
pressure washer. It feels a little bit hollow or cheaper in the hand than the unit itself.
There is no battery life indicator on the battery because it's actually on top of the
pressure washer tool itself. There's no button to push. You have to pull the trigger
and we're getting red, yellow, and green light all at the same time. So I guess according to
the pressure washer, we've got a good amount of charge on this battery. So to install the battery,
you simply slide it on the rails from back to front and it clicks into place. To release it,
you push down on the red button on the battery and slide it back. That's a nice tight fit. Now
when I turn the tool around, I see the two slats here where the battery connects to. That means
all you have is a positive and a negative, meaning there's no communication going on between the
battery and the tool itself as far as overheating or issues with the battery. It's simply drawing
power from it. But if you look at the battery on top here, you'll see one, two, and then this small
third little spot here. That means this battery has some sort of BMS or battery management system
inside that could be talking to the tool for that benefit. Now the battery doesn't have a cradle
charger to go into. Instead it has this wall charger with kind of like a stereo jack that
plugs into the top of the battery to charge. And as I look at the charger, I see that the output is
21 volts with 1000 milliamps and that translates to a 21 watt charger. So that's a pretty decent
size, about middle of the road, so we should get a pretty good charge time out of this charger. And
with that, let's take the battery and the charger inside. Let's charge the battery, see how long it
takes to charge, and whether or not it creates any heating issues. All right, with the charger plugged
in and not connected, we have a green LED light. I imagine when we plug it in here, it's going to go
red, showing us that it's in the process of charging. We'll start our timer and get a base
reading, which is 77 degrees Fahrenheit. Wow, only 12 minutes to fully charge this 3 amp hour battery.
It must have had almost a complete charge on it. And we rose a few degrees. Right, it's 82 now,
so maybe five degrees, not much at all. We're going to have to run this battery all the way
down and give it a real test of this charger to see how long it takes to charge from a fully
depleted battery. All right, now to the part we're all waiting for, actually using the tool.
So all you need is the hose attached, dropped right into a bucket. Now it might take a little
bit for it to circulate all the way through, but once the water starts going in, this little part
here will sink as the hose gets water in it, and we'll be good to go. Right now it's floating,
which is not going to prime itself. All right, so since the hose is going to float and not prime
itself, I guess we could either disconnect it like this and start getting that air out.
That seems to be working. Let's get a couple wraps in the water. Good. Okay, then we'll reattach
the hose. Well, at least we know it's airtight. So there's two clicks, the first one and then
the second one, and you don't have to pull it back to click that into place. So that's kind of cool.
All right, let's prime it, and then I want to test first this two-in-one nozzle because I've never
seen anything like it before, and I want to see what it looks like. Let's see how long it takes
to prime. Nice and quiet, huh? It's strong. There we go. I see water. All right, so there's the wide
open setting. Let's start twisting it. Also, it fans way out and then gets very pointed. All right,
well, let's fan it out. Let's see what that would be like. I guess I could see it useful in kind of a
halfway fanned out. I don't know what else I would use that for. Let's switch. So we'll push in,
twist to the right as you are looking at it, pull that out, and let's move on to the next one,
which is what most of us, I think, will use, which is this multi-selector one.
Now, we're just going to have to guess at what each one is because there's no markings on it
unless I look this way, but I can't see it in the bright light. Okay,
okay, that's the same thing as that other one, like a fanned out setting. That's very useful.
That's the same, so one of those is going to be a certain degree. The other one's going to
be a little less. I couldn't tell much difference. Let's look. I can't see much of a difference there.
All right, the next one is the jet setting, but that is too. Let's go back. So this one's got
all kinds of small little streams of water coming out, and this one seemingly has one,
but they both kind of look the same on camera. Watch this. It's kind of like going to the
optometrist. Do you prefer one or two, one or two, or about the same? Okay, next one
is like a pin needle jet, just like the last four have been, right? All right, and the last one
is another fan setting, so it looks like we have three fan settings. That one real tight,
that one out a little more, and that one pretty wide. So the fan settings are pretty cool,
and then the rest of them are all forms of the jet, I guess. All right, it seems like they have
way more nozzles than they need, almost like they're wanting to advertise how many settings
there are when they all kind of, it looks like basically two settings. Next we have the soap
bottle, and you're not going to really be able to appreciate it here, but in the next scene we're
going to clean some garbage cans, and then we're going to clean one of our vehicles, and that's
when this will really shine. But let's just see what the spread pattern looks like while we've
the camera set up. That really jets out. I wonder if this is adjustable? Nope. All right,
we'll see what that looks like once there's soap in it. And finally we have the brush attachment.
Now again, I don't think it's really going to matter what it looks like right here,
it's going to matter what it's like using it. First thing I notice when I attach it
is it's really close, but it is at an angle, so hopefully it doesn't
bump into the battery when you're scrubbing a car or trying to get in there to scrub
a garbage can. Oh, I'm not sure. Let's see. Yeah, so just a real gentle rainfall of water coming out
of the brush. I really wish there was a way to attach the soap to that, but we're going to try
it nonetheless and see how it works out for us. All right, on to actually cleaning stuff.
Well, it's afternoon in Las Vegas, which means it is windy, but I've got my microphone turned
around inside my shirt, so hopefully that'll attenuate some of that. Let's wash a garbage
can. If you look inside, this thing is filthy. It also kind of smells bad, so we're going to
wash it with one of my favorite products, Fabuloso, and it'll make it smell lavenderific.
So the first thing I want to do is test out our little foam bottle. So I put in 50% Fabuloso,
50% water to dilute it a bit, and let's see what it looks like. I always clean the inside first
because then I can scrub that, tip it over. We're on a little hill here. Dump all that out,
and that way, whatever gets dirty from tipping over the can on the ground, I can
then wash the can off. So let's first see what it looks like to use the foam feature.
Oh, yeah. Look at that. That looks great. Okay. So this has enough of a powerful stream that
it's actually hitting the really dirty corners of the inside of the garbage can. That is pretty
interesting. Let's switch from this one over to the foam brush and start brushing away in here.
If I said foam brush, that was just a Freudian slip. It doesn't have foam coming out of it,
unfortunately. All right, let's get a little bit of water out of it and just start scrubbing.
Yeah, I don't know if it really needs to be diluting the soap with water. I just don't
understand this. Oh, came undone. So as I'm brushing with it, it actually untwisted itself
and would have popped off if I had used it again.
All right, I'm going to set this down and just use the brush to scrub what we've already soaped up
because I don't get it. Here we go with just the brush.
The bristles are so soft on this that it's not really useful for cleaning a garbage can.
All right, let's tip it over. We'll grab our standard nozzle
and I think that's a fan setting. Let's rinse it out. Yeah, that works good.
Let's give an extra little push to those corners. Look at that. I like that. For some reason that
filter is starting to rise again. Let's get the outside with the remainder of the Fabuloso we have
and I'm going to give a little shot back in here to make it smell good.
Let's agitate all that dirt and soap and just for fun, let's use this two-in-one attachment.
Oh yeah, so this works just like a fan and it's got an extension basically on it a little bit,
so that's cool. That's a pretty respectable garbage can. Well, this is my daughter's truck
and as you can see here, it is filthy, so let's wash it for her. She works hard with school and
softball, so now I'm going to do the very gentle car wash where I'm going to take the pressure
washer first and take off as much of this dirt as possible, then suds it up with soap and water
and then scrub down all of the panels. All right, I'm using just regular old
off-the-shelf car wash concentrate, 50-50 concentrate to water
and instead of using that brush, I'm going to use a wash mitt. I tried the brush. I don't get it
and we'll rinse with the same nozzle. I'm getting to like this wand here.
All that dirt coming off. Microfiber towel and now that I made a clean spot, I guess I got to do the
whole thing. So on repeated occasions after being primed, the filter is buoyant and is floating
back up to the top. Let's see if it causes a priming issue. See? Yep, same thing again.
All right, we've had a few wind and rain storms here, so let's see how it does on a stucco wall.
Oh yeah, look at that coming down. Yeah, respectable. Look at that. That was a hornet's nest.
All right, I have to say that's pretty good. So without a doubt, one of the coolest features of
not having to hook up to a garden hose is the fact that you can just drop the filter right
into the pool when it comes time to wash the wet deck. Let's let it prime for a bit and get to work.
See how it does. There we go. Oh yeah, look at all that dirt. I can hear the battery fading a bit.
We're into the red. Got that bird poop up real good. And there we go. All right. So everything
you have seen thus far has been on this one 21 volt battery. So let's take it back inside and
see how long it takes to charge from a completely depleted state of charge. All right, just over
three hours to fully charge the depleted battery. Let's see what we got for a temperature reading.
It did not rise in temperature at all. Now the actual transformer inside gets quite hot,
124 degrees Fahrenheit, but nothing with the battery. So I recently had a viewer insult me
for not including the weight of a product I was reviewing. George, you're rude. I deleted
your comment, but point taken. So I've got this little luggage weighing scale right here,
and I weighed the pressure washer with the long wand and it is 2.9 pounds. And since the battery
ran out, that's enough testing for me to give you my pros and cons. First, the pros. The build quality
on this Garden Joy pressure washer is the best that I've reviewed so far. I love this dense
polymer feel to the main unit itself and everything else other than the filter was
also really good quality. This two-in-one wand ended up becoming my favorite, my go-to,
so I really like that as well. Next would be the hose. It's really supple, excellent quality,
unravels and then rolls back up really easily. The only part about it obviously I don't like
is the filter, but we'll get into that in a minute. Next would be the battery life. The
battery life was good. I wouldn't say excellent, but it was good. You saw everything that I tested
it before the battery gave out. Now there was three other sides of the truck that I didn't show
for brevity of the video, so I would say it was pretty good. I had anticipated a couple more scenes
where I would have washed our Adirondack chairs and also used my backpack sprayer to just have
water in it so I could be truly mobile and not walking around with the bucket, but the battery
gave out, so my testing and review gives out when the battery does. Next would be the charger. 21
watt charger I think is an excellent value. I've reviewed a bunch of tools lately that have
very weak chargers, so I was happy to see that and I thought it worked really well.
And finally for the pros, I did love seeing a battery life indicator so you know where you're
at while you're utilizing the tool. Now the cons, and probably a surprise to no one. My top con
is the multi-position nozzle. As I clearly stated in the testing phase, I don't like that you can't
tell what position you're at from the top of it, and also it has six nozzle positions but really
only two different spray patterns, so I would revamp this completely or maybe just get rid of
it for the two-in-one nozzle that I like a lot better. A close second would be the foam brush.
Without a soap dispenser attached to it, I really don't see the point. The bristles are also pretty
weak, so I have reviewed other pressure washers where there was a port on one of the wands right
here where you could attach the soap dispenser bottle to. Now admittedly, that was on one of
these multi-position nozzles, but I think it was a huge missed opportunity not to have the brush
integrated with a soap dispenser bottle. If I was giving Garden Joy advice, it would be to
toughen up these bristles and put a port where you can attach the soap bottle to it. It would
make the brush functional. Now I wouldn't get rid of the nozzle on this soap dispenser because it is
excellent. It has a really strong stream for getting into some of those really dirty spaces.
You need to use a wand to pre-soak everything because otherwise the soap runs out really quick
on all pressure washer soap bottles, but please don't get rid of this one. It is awesome. While I
absolutely love the quality of this hose, this filter is not good. The build quality on it is
pretty cheap, but primarily the problem is it's too buoyant and it floats to the top of the bucket
and unprimes itself if you put the tool down for any given moment to scrub something or dry
something off, whatever. If I were Garden Joy, I would like to see them weight the bottom of the
filter beyond its buoyancy so that it sinks into a bucket instead of rising to the top and unpriming
as you saw it do several times. Rather than including this little two-gallon bucket that
would just make your life miserable running back and forth to a garden hose, I would rather see
a small inexpensive tube of pure silicon grease that you could lubricate all of these o-rings
because they're everywhere on this tool, and I think that would be a much better value, though
maybe not looking as good on an Amazon advertisement page. Like all of the pressure washers I've ever
reviewed, this one did leak a little bit, so I didn't want to get my side nor my back all wet
while I was using the tool, therefore I didn't bother using the strap. Instead, what I do is when I'm
not actively using the tool, I just set it like this on the five-gallon bucket that is my water source
and it holds it, it won't roll off, everything's fine this way. If the battery life had been longer
and I had used the backpack with the water tank to supply my water, I probably would have tried
this out and just gone with getting wet, but the battery life wasn't long enough and therefore
this is my preferred method for setting the tool down so it doesn't get dirty. So if you found this
video helpful, will you please give it a thumbs up? It really helps the algorithms to start
suggesting it to more viewers like you. Also, please consider subscribing. I work really hard to put out
good quality content. There's a lot more tool review videos to come and I have a series on my
van build going on, all of which I think you will enjoy. It's free, all you have to do is log in to
YouTube or Rumble and click follow or subscribe and it really helps the channel. Now I'm gonna
leave a link to this tool in the description below. Full disclosure, that will be an Amazon
affiliate link, so if you click on it and end up making a purchase, it won't cost you a thing,
but I do get a small reward at the end of the month. It helps to justify all the time it takes
to set up multi-camera angles and make these videos. I'd like to thank Garden Joy for again
sending me another tool for my independent review without any preconceived agreements on what I was
going to say. I think that takes a lot of courage to send a tool out kind of blindly like that,
and I respect them for doing that. Until next time, thank you for watching.