The DeWalt® Cordless Inflator will display 3 different air pressure units using a simple technique.
The inflator has three push-button switches along the top of the pressure inflation progress indicator and the pressure setting indicators. The 3 push-buttons are (L-R) power, toggle between blower and inflator, and flashlight.
Three pressure modes are available: PSI, Bar, and kPa. To rotate between them and display the unit you prefer (or that is marked on the tire you are inflating!), press and hold BOTH of the buttons on the right while simultaneously rotating the pressure setting ring on the inflation start button.
You will see the pressure units change in the pressure setting window. Choose the one you like!
Thanks for watching, and remember to JUST DO IT YOURSELF!
Hey, Dirt Farmer Jay here from DirtFarmerJay.com. We love this cordless inflator by DeWalt. We use
it on the road for safety, and we use it around here to keep our tires inflated, our vehicles,
and yard equipment. But sometimes when you go to inflate a tire, the markings or the pressure units
are different than what is set on your unit. Here I've got it set to PSI. To change that to one of
three modes, all you're going to do is press these two buttons right up here. You see the three,
the two to the right, and rotate this selector. And now I'm on bar, and then in here I'm in
kilopascal units, and then back to PSI. And that's how you do that. I'll show you a link
in the description where you can get one of these units. And why don't you check out our shop at
DirtFarmerJay.com forward slash shop for t-shirts, coffee mugs, and hat gear about
the message of just do it yourself. Thanks for joining me today.