We built this hanger and charger base for our DeWalt® Blower, but this same approach can be used for several yard and home tools - either with or without the need for a charger.
Simple to build, using off-the-shelf hardware, creating a place to both store and keep at the ready your tools is a great way to keep disorganization at bay.
In this build, DirtFarmerJay combined a plywood mounting base (hung on the wall with screws and anchors), a modified hanging bracket to hang the blower on, as well as a charging base to both store the battery and keep it charged.
This same approach, with or without a charger, can be used for a variety of tools, in a variety of settings. Organization looks and works great in the utility room, garage, shop, and outbuildings! We recommend that a wood sub-base always be used, as this allows bridging across and attachment to at least 2 studs, assuring that the attachment is secure.
If you mount a charger, many of them have hanging holes on the back of the unit. We put a bar of wood or metal above the charger so it won’t lift off when you remove the battery. Organizing the cord is a nice touch as well!
Various hanging brackets for a range of objects can be found at any well-stocked hardware store. For this build, DirtFarmerJay used a Blue Hawk Utility Hanger, #0595504, from Lowes. To get it to fit in the handle bracket of the blower, DFJ modified the hanger using a 4” grinder, file, and paint.
This hanger can be used for several items such as ladders, lawn furniture, and even wheelbarrows!
Depending on the item being mounted on the wall, there are a variety of hangers for all sorts of purposes! You will very likely find a hanger for your purpose by using the search term “utility hanger.” If you can’t find what you need ready-made, there’s likely something that is close enough that can be slightly modified to fit what you want to mount.
While you’re at it, make it look nice, by painting the backboard and tidying up any cordage. Why not create a space that is enjoyable to visit when you need tools for the job? And just think, you made it because you can JUST DO IT YOURSELF!
Follow us on Social Media to know when we’re building projects or releasing new episodes!
Hey, Dirt Farmer Jay here from DirtFarmerJay.com.
Recently, we bought this Dewalt Blower,
and when you have tools like this
with a charging base and battery and all that,
to keep entropy and disorganization at bay,
it's great to build a little rack for it, and we did that.
Stay tuned, and I'll walk you through how we did it,
but also some principles you can use
and approaches you can use
for all sorts of tools around your place.
Stay tuned.
Hey, Dirt Farmer Jay here from DirtFarmerJay.com.
Well, we are constantly trying
to push back disorganization in our house.
Got a lot of different tools and maker places,
and we entertain a lot,
and if we don't keep things organized,
well, it can really overrun you.
So when we recently bought this Dewalt Blower,
we thought we're gonna right away take the approach
of giving it a place, and in this case,
we're in our mudroom,
and while this base and charging base and hanger rack
may look really straightforward,
there's a couple of things I think you'll be interested in,
and I'm gonna show you that as you go through,
you can use it for all sorts of different hangers,
whether it's for ladders
or you're doing something for the bicycle
or you've got tools, some with charging bases,
some that are corded, all that,
that you could just take some of these principles
and make a great setup for you,
but let's walk through this, and you can take a look.
So the first thing you gotta do
is figure out the layout of this,
and as you can see here,
all I did is take the actual objects,
the blower itself and the charging base
and laid it out on my work table
and then did a measurement around it
to figure out what size of the background base do I need.
Now, before we go any further,
I'm always gonna suggest that you use some kind of base.
If it's a long hanger,
let's say for all sorts of shovels and brooms
and all that sort of thing,
or whether it's something that's compact like this,
I always use a sub-base.
It allows me to do a couple things.
It makes it easier to screw different objects
and organizers to it.
Number two, if it's a sizable item,
it allows you to bridge across the studs in the wall
so that you're not over-depending on anchors.
In this case, because of a smaller unit here,
approximately 12 by 18,
we're able to use anchors in the wall.
But first thing we did is go ahead
and get the size of that done.
The second thing I did
is then just take the length of the table saw,
cut it to size,
and then what we did is went ahead and rounded it,
rounded over the edges, made it nice to the touch.
Heck, if you're gonna do it, do it nice.
So the next thing we need to do
was put keyhole slots in the back of this mounting base
that the screws that were drilled into the wall
would be protruding,
and then this could be hung on it,
slid over and secured on the wall.
So the first thing we need to do
is use a keyhole router bit.
You can see this is kind of like a T-shape,
but it has a cutter on the top
that when you lower wood onto it,
it's gonna drill a hole first,
and then you can slide it one way or another.
So then we line up the bit with a layout line,
the distance we want from the fence,
and then using start and stop marks
of how far we want first the hole
where the screw's gonna go in,
and then the slot behind it
to slide over onto the screw head,
we put marks on the side of the base itself,
and also on the fence on the router table,
I put the start and stop marks there,
and therefore I can start here on the first one,
drop the base onto the rotating bit,
bring it down flush to the table,
slide forward using my guide marks,
then retract and lift back off.
Then you simply do the same thing for the second one,
and now your keyhole cuts are done.
Now, let's go ahead and make this pretty.
So I went ahead and touch-sanded it,
and we went ahead and painted it up,
and just to make it look nice,
I chose the closest color I could get off the shelf
with a Rust-Oleum color that looked yellow.
It's pretty close and gives it a little bit of classiness.
Like I said, if you're gonna do it, why not do it?
So it looks nice and you enjoy it ongoing.
So we went ahead and painted that up.
Now, the next thing that you need to do
is modify your bracket.
Now, I always give you more information
than what I can do in the video in the description below.
So you'll see down below the number
for the bracket that we used,
as well as you can do a search term
for all sorts of mounting brackets,
hanging brackets, organization brackets,
and you're gonna come up with lots of different brackets
depending on what you're going to hang up.
In this case, this particular bracket
worked really well from Lowe's,
but it needs some modification.
So the first thing I did is went ahead and marked it
where I thought it would fit into this handle on the back.
So we went ahead and cut it to width over here
and went in and cut that out.
But once it was done and cut out,
then I could see that it didn't still fit.
It needed further modification.
We need to actually taper off the sides
because of where the sides of the hanger
hit on that bracket.
So after that was all cut away,
then we went ahead and test fit it.
It worked great.
So what you don't see is that I went ahead
and used a flat file, ground off all the edges,
filed everything so we didn't have any burrs,
and then just went out and spray painted it,
made it look nice.
And as you can see here,
it looks very clean and almost looks factory.
So that allows us now to hang that right up on there.
No problem.
All right, the next step we're gonna take here
is I'm gonna flip this sub base over
before I mount any of the hardware on it.
And I'm gonna take a strip of masking tape
and lay it over the top of those slots
and then color it in with a pencil,
just highlighting it, doing a rubbing.
Now I can use that tape later on on the actual wall
and I'll know exactly where I need to drill the screws in,
which I put a level line
and that it's gonna fit perfectly.
So we do that, remove that, now flip over the base,
and now we're ready to go ahead and affix the bracket.
So after determining where that's gonna be
and marking that, we go ahead and drill that in.
The bracket is now in place.
Now it's time to move over to the battery charger.
Now most battery chargers have a couple key holes
on the back, certainly the ones from DeWalt do.
And all you do is measure where those are gonna be,
strike a level line, punch some holes,
and then go ahead and drill in the screws,
leaving them proud so the base can slip over the top of it.
And then once that's on there,
you need to do one more thing,
and that is to put a keeper that's up behind here
that just stops it from every time you take the battery
in and out of the base
from it wanting to jump off the screws.
It keeps it very secure.
So that's what you're gonna do there.
Install that retainer, and the retainer can be wood.
It can be a piece of screen mold.
It can be a piece of metal bar.
I have this scrap aluminum.
Whatever it is you do, just screw that in above it.
You'll see me use that in other charger bases.
That's just an approach.
It makes it really nice when you take it on and off there.
It isn't sloppy and it stays in place.
Well, now you've assembled where the charging base goes.
You know where the hanger is gonna go.
It is now time to mount it on the wall.
And so using your masking tape template,
we go ahead and line that up, mark holes on the wall,
do a little bit of pre-drill,
and then we use these drilling anchors
using a cordless drill and just drive those in flush.
Use moderate speed when you do that.
The idea is not to overdrive them,
but just bring them down flush.
And when you do so, the next thing you're gonna do
is then use drywall screws, the bugle head type.
Go ahead and screw them in, leaving them proud again.
And now you can take the mounting base,
line up the holes on the slots
over the tops of the screw heads,
push it down, and then slide it to one side
and lock it on the wall.
Now to further secure it,
we also put a lock screw down in the middle center.
And here, I'll take that off of there so you can see it.
There it is right there.
That has stopped this from sliding around on the wall.
So once that's installed, nothing's gonna move.
This feels solid.
It's very nice, and so that works really well.
Now, one other thing I wanna mention to you.
When you're building something like this,
whether it's this or any other tool hanger you're doing,
you're actually doing prototyping as you go along.
There's a lot of trial and error to get to fit correctly.
And you saw that earlier when I did this bracket.
My first cuts weren't sufficient
for this to fit correctly on there.
So we had to cut these tapers back,
and then that worked correctly.
The second thing that happened after we got this mounted
and I put it up here,
we did not have this piece of square tubing here.
And what would happen
is when you'd hang this on the bracket here,
this would tip back.
I just didn't like the way it looked.
Kind of looked like I just stopped the project in the middle
or this was an afterthought instead of a planned project.
So we put this piece of one-by-one square aluminum tubing
that I had and mounted it right here.
When you mount this and then have that bump right there,
this hangs vertical.
It looks really nice.
It's just a nice little touch.
Well, we've been very pleased with both this setup,
having this tool in the house.
And you can check it out right here at this video
where we do a review on this actual unit.
I think you will find this to be a great addition
around your home.
If you found this to be helpful, make sure you like it.
Check out our merch at DirtFarmerJ.com.
Until the next time,
this is Dirt Farmer Jay from DirtFarmerJ.com.