#cordlesstools #blower #leafblower
This completely portable DeWalt blower 20v, the DeWalt DCBL722, which has enough output to do the job of removing debris or clearing off an area, is REALLY handy!
A year ago we bought the DeWalt® DCBL722 Axial Blower as a bare tool - without a charger or battery. The unit cost $149 and is part of the DeWalt® 20V Flexivolt Platform.
We’ve used the DeWalt leaf blower for over a year, and we continue to be impressed by its performance, battery run time, ease of use, and it’s weight.
The tool without the battery weighs just under 8 pounds/3.6 kg and is well-balanced even after the battery is added. The packaging was more than adequate and the contents were nested well and damage-free. There are only 4 items when the package is opened - the main blower unit, the tube, the concentrator tip, and the documentation.
Assembly is easy, although the latch that holds the blower tube to the blower body can be tricky. Figure out how it works before you assemble the unit because it’s easier to put the unit together than it is to take it apart!
Some key specifications include a sound rating of 61dB, velocity output of up to 125 mph (201 kph), and the maximum CFM (cubic foot per minute) produced by this unit is 450.
Practically, this unit packs enough power to quickly clear a smooth area or lawn of leaves. It’s not too heavy, well balanced, and has a reasonable run time before depleting the battery. We get about 20 minutes of run time with a 5 aH battery before having to swap it out.
You can get more by running the unit at only the speed you need to get the job done. Use the unit’s built-in “cruise-control” on the trigger. This allows you to bring the motor up to the speed you desire, and then set it there. This can extend the run time, as well as reduce “blowback” when you point the unit towards a corner or wall - or when you are blowing debris into a slight headwind.
We found this tool to be very handy and have decided to store it in the house along with other household care and maintenance tools and supplies. Check out this hanger/charger base we made for placement in our mudroom:
https://youtu.be/4b2wQGgaowY
To see our original review of the tool, visit:
https://youtu.be/aOHSSIPD8Z4
We’ve used this blower to clean our garage floor, front porch, driveway, sidewalks, and even garden gravel pathways. It’ll work for dry leaf clean-out in gutters as well!
Bottom line? Do we still continue to recommend this tool and were our initial impressions correct? Yes and Yes!
JUST DO IT YOURSELF!
Buy your DFJ T-Shirt, Cap, or Coffee Mug at https://www.dirtfarmerjay.com/shop
Follow us on Social Media to know when we’re building projects or releasing new episodes!
Instagram: https://www.instagram.com/dirtfarmerj
Facebook: https://www.facebook.com/dirtfarmerjay
Hey Dirt Farmer Jay here from DirtFarmerJay.com. One year ago we bought this DeWalt DCB-L722
leaf blower and our initial impressions of that were very good. You can check out that review by
looking at the link above or going to the link down below in the description and we'll give you
the full review. But there's just a couple things I want to recount and say whether this turned out
to be as good a tool as we hoped it would be. Our initial impressions included it had
sufficient blowing power to do the kind of work we needed. We use it to clean out our garage,
sweep off our sidewalks. We have a nice front porch that does a good job of taking off the
leaves and dust on furniture that collects there on the lawn furniture. And we also use it out on
our driveway from time to time. And we also found you can use it on gravel paths with leaves as well
to kind of reduce the amount of raking you need. At least you can clear an area very quickly.
What about the quality and construction of the tool? We bought this as a bare tool meaning that
it did not have a battery. We went ahead and installed a 5 amp hour battery with it and we
also built a hanger and a charging base that we use this in our mudroom and you can check that
video out of the build on that and the parts list in the link above or in the description below as
well. A couple key things I want to call out on this. Number one, did it live up to our expectations
after a year of use around here? And we've used it pretty regularly. Yes it has. We've been very
pleased with it. There's a couple things you should know. Number one, on a 5 amp hour battery
you're going to get about 20 minutes of full blast power. You may say 20 minutes that's all?
Well you can get a lot done in 20 minutes but more than that there's a way to extend the battery
and that is not to run it full blast. Let me show you what it sounds like and what it's doing at
full power. That's full power so it's really putting out some air right there. Okay I can lower it down to
where I need it but that's kind of finicky. You're sitting there trying to keep in a speed.
This is a commonly overlooked feature and that is what I best call a cruise control that's right
there. When I bring this up to the speed I want all I need to do is slide that top and it'll hold
that speed for me right there. So I can just grab on this and move around. Now there's an
other advantage other than extending battery life and that is that you reduce blowback. What's blowback?
Well you're blowing along the wall you get near a corner or some object and all of a sudden the
amount of air you are supplying exceeds the ability to get the object out of the way
and so they do this kind of loop or blowback over the top of the airstream and now there's
leaves or debris all over the place you just cleaned off. Well you don't need that so just
lower the speed use gentle sweeping motions and it'll work really well. Now the kind of fan that
is used on this is an axial fan. You can see meaning that the fan is pulling air in the same path
of the direction of airflow and that is one of the reasons this can put out a significant
amount of flow. You can check out the specifications for this unit in the first video that we showed
you. Also you can look at the description down below and I'll give you some of the particulars
on this. We've been very pleased with this tool. Well we depend pretty heavily on the DeWalt family
of tools the 20 volts and if you're going to do that you need a good battery charging station.
Check out this video where we built one that allows you to charge multiple batteries at the
same time and have them ready to go for lots of different tools and check out this other video
that we've created for you that we think you'll be interested in. Until the next time this is
Dirt Farmer Jay from DirtFarmerJay.com