Hi, I'm Mike with House on the Mend, and in this video, we're going to be reviewing
the Leifli Cordless Pole Saw, complete with a three-foot extension and running on their
very innovative U20 battery platform. So let's get started.
Now, I'm not paid nor sponsored by Leifli. I have reviewed several of their other outdoor tools,
and in all cases, they sent me the product for free for my independent review. So let's unbox
it, see what comes in the package. We'll go over the setup of the tool and the battery platform.
Once again, a box within a box. They don't mess around with shipping.
All right, here's everything that comes in the excellent packaging. We have the head here,
and the first thing I notice is that it has a dial to adjust the tension on the chain rather than
having to carry a wrench around that would loosen it and adjust it. I like that very much. This
little guard here is to help you push against your work area and then cut. One glaring thing missing
is the bar and the chain. They come completely disassembled from the product. That is an extra
step of assembly that I think is a pain. I wish they would have installed that already,
because you do get a scabbard to protect the chain, and most of the time when you buy tools,
they come with the bar and the chain on and then the scabbard over them. But as you can see,
that would have added about another six inches in the packaging. So I understand it, but it's
going to be kind of a pain to assemble. Now right up top here, you'll see this cap, and that is for
bar chain oil. So unlike some of the smaller chainsaws, the mini electric chainsaws that I
reviewed that you just spray some lubricant on the chain, this is getting back to your traditional
style of chainsaw where there is bar chain oil required. And as the chainsaw operates,
it's automatically lubricating the bar and the chain. And you can see here, there is a little
window where you'll be able to tell the amount of fluid that you have left. We will go over that
later on in the review video. Now as far as the tool, the build quality as usual is excellent.
You've got this really cool carbon fiber looking portion of the black plastic,
then the orange accents, the white fit and finish is really nice. There's no jagged edges anywhere.
All three of these poles are metal and pretty heavy duty rather than fiberglass. So one of my
chief complaints about the Ryobi pole saw that I reviewed was that these rivets at the junction
points became loose inside the fiberglass and the whole saw was very wobbly. So I'm going to be
interested to see how this holds up to use and if it's more stable. The next piece we see here
is the handle. It's got a port for the battery to go into more on that later. You've got a little
safety release here and then the trigger right here. I see a swivel that receives the shoulder
strap and it also has a screw right here for this centerpiece. So you can slide it and adjust it for
about 10 inches of adjustment to try to get it balanced. So I'll be interested to see how
comfortable that is. In front of that is this really nice long foam handle grip. The strap
is your typical kind of nylon shoulder strap. It has one metal clasp up front that will actually
connect it to the tool and then some plastic adjustment as well as kind of belt loop snap
here and then some more metal towards the shoulder area and the shoulder pad has quite a bit
of foam and padding on it for a shoulder strap. That's cool. Usually you just get a little piece
of rubber. The unit comes with one two and a half amp hour battery which is a nice size.
I have several of these Lifely batteries. They are fantastic. Let's take it inside,
take a closer look and go over charging. If you've watched any of my other reviews on Lifely
products, the talk and discussion and charging of the battery is going to be pretty much the same.
So if you want to jump forward to this point in the review, we'll get to actually assembling
and testing. But otherwise, I want to show you some aspects of this battery because they're
very different than your typical one and if I don't put that in, I do get questions in the
comments. So let's head inside and take a closer look. All right, let's take a closer look at this
very sleek battery that you get. It's got the same sort of carbon fiber graphic along the sides of
it. On the top of the battery you get a battery life indicator. I love that. We can see here out
of the package we have three out of four bars. Now on the other side, if you look at this picture
here, you will see a standard USB port. There is a negative and a positive port. Those are the ones
that go into the tool and you have a USB-C port here. So this battery is multifunctional. Not only
can it run your tool at 20 volts, but it also has a USB and a USB-C output of 5 volts to charge
any of your electronic devices such as your phone or, in my case, camera gear, which is really,
really cool. I have seen attachments that go on some of the major tool brands' batteries and with
that attachment you can charge electronics, but it's rare to see a battery that has two ports for
that kind of thing already built in. Now speaking of the USB-C port, which is the one to the far
right of this face of the battery, that is the port that you charge this tool with. So there's
no cradle or any other charger. You can charge this with a standard household USB-C charger. In
fact, the battery comes with this cable right here that is pretty cool. Not only is it a USB
to USB-C, so you can charge with it or you can charge other things with it, but this one actually
breaks free here, folds back, and you have USB-C to C. That's really cool that they include that.
Now speaking of charging, what you're looking at here are three very common household chargers.
This little guy here is only five and three quarters watts, this Amazon one is nine, and then
this Apple one is the largest of them all, charging at 10 watts. However, if you look on the bottom of
the battery and you read the data, you see right here that this battery can be charged at a maximum
of 45 watts. So that's four times the power of even our largest household charger. So my
recommendation is not to use household chargers, but instead to buy one of these. I got this one
off of Amazon. It is a 45 watt charger and it is not very expensive. It looks like any other charger,
but when you deplete these big batteries down, this will charge it in a quarter of the time
that a charger like this would. One of the only things I don't like about these battery cases is
that there's no way to distinguish on them which sized battery is which. Those sorts
of markings are readily identifiable on most batteries, but here you would have to break out
a watt calculator and do some calculations. So what I have done is to keep track of my various
battery strengths. I take and I label them with our little label maker so that I can keep track
of which size battery is which. Speaking of battery sizes, here are some name brand batteries that
you're probably aware of. And if you look at the actual perimeter of the Lithely battery, you'll
see it's just slightly bigger than some of the batteries. However, if you look at this view,
see that it is thinner than all of the competitor batteries. All right, with our 45 watt charger,
I'll plug into the battery and you can see we immediately start getting a readout on the
battery life indicator. Three of the bars are solid and we have one blinking bar.
While the battery is charging, let's set up the saw. So you've got this straight piece right here
on the chain tensioner. We're simply going to undo that counterclockwise
and that releases the entire chain guard. And if we look here, we can see there's little grooves
in this piece that's connected to the dial itself. And those are going to correspond
with these little grooves on the bar itself. And so as we move that dial and engage these
little threads here, the actual bar will move back and forth this way and will tension the chain
around this back area here where it connects to the motor. Now here's the included chain.
It is an eight inch and it has a three eighths inch pitch. So these are widely available on
Amazon. Here's a picture of just a quick search I did. So you won't have any problem finding
replacements for it if you don't like sharpening. Let's take that out of the bag
and we'll unwind it. So you want the tooth that's actually doing the cutting right here
facing forward. This little bit right here kind of looks like the tooth, but it's not.
This is the actual cutting tooth right here. So with that in mind, let's put the chain on the bar.
We don't want any kinks just like that. Then we can take it in like this and put it around so it
engages. See that kink? We don't want that there. It engages with the motor. Now the cover has a
couple little plastic keys that correspond on the tool itself so that it doesn't spin around
like that. So just start getting it threaded on first and then as you get closer you'll feel it.
There we go. Engage into those holes. All right now that is fully engaged and on there. So now
we need to tension the chain. Now if you see me pull right here, we do have a little bit of play
and that's pretty good. So you don't want it to be so sloppy that the whole chain is sticking out
nor so tight that you can't pull it down at all. So we want to just tighten it up
just to the point where we can pull down a little but we can't see that tooth in there.
Just like that. Good. Now I'm going to hold the dial in place, tighten up the
tensioning handle here and now let's recheck it because sometimes the pitch of the bar changes
when you tighten it down and it's tighter than you thought it was. In fact this one does that.
See how tight that is now? So unfortunately you have to loosen it more than you'd like to
like that so that when you finally tighten it it's the appropriate amount. All right good.
All right now I've got the saw resting on this actually is a little guitar head support for
when I work on the kids guitars. Let's fill the reservoir here with bar chain oil. So I just have
a little funnel so I don't spill and I'm just using a standard everyday bar chain oil. You can
find a quart like this in any hardware store, tractor supply store, feed store that sells
chainsaws and that. I'll leave a link to a brand on Amazon but we just want to fill right up to
this mark right here. Now one of my chief complaints about these small saws is how
small the bar chain oil reservoirs are. So let's see how fast this guy fills up.
Oh already I barely put any in.
Did you see how quickly that happened? Nonetheless we just put the cap back on
and this portion of the saw is ready to go. All right when it comes time to put the sections of
the poles together as you see in this picture there are corresponding plugs from one side of
the pole to the next and all you have to do is line those up. In this case it's arrow to arrow
you slide it in there you'll feel it engage into that plug then you have this connector
that slides up and just threads on. Righty-tighty. Pretty simple. If you want to use the shoulder
strap you've got this little swiveling portion here that will receive this metal clasp so let's
snap that in place. There we go. Finally we'll install the battery and if you see this key
right here this is what holds the battery in place and you can see a corresponding little
clasp inside of the channel for that. So we'll take the battery slide it downward you hear it
click into place and you know you've done it right when you have the battery life indicator
available for you to check. Now right down here on the inside of the grip handle is the release button
you simply press that and the battery is under spring tension from a little spring down at the
bottom of the battery port. All right let's get some protective equipment and start cutting.
So for the safety of our trees let's go over the proper way to cut a branch especially when you're
not there to support it while using say a mini electric chainsaw. In this case we're way up in
the air and nothing can support this heavy branch. Now if you just start trying to make your cut
right here where you want it as the branch starts to bend down it can tear the flesh down and injure
the tree. So instead what you want to do is come up from your final cut area make a relief cut
underneath then a little bit in front of that make your through cut the branch falls away
there's no injury then you can come back and make your final cut so that it ends up looking like
this and healing properly. All right four solid bars on the battery means it's fully charged so
we're ready to go. Now this chase tree here is peeking out a little past the wall you can see
here in when I'm in my van it's like encroaching on the area that I drive through and kind of
dragging alongside the van so let's thin it out a little bit. Now I normally like to make all my
cuts when the trees are dormant but we're into late November and still our trees are hanging
around because it's pretty mild out so they're turning colors they're getting ready to go dormant
so I think we'll be all right. Okay now as we talked about I'm going to make a relief cut
underneath first and then I'm going to make a through cut and then my final cut and let's see
how we do. Now what I really like on these saws is this hook right here and if the branch is kind
of stuck up in there and not really coming down you can reach up with that hook and like a gaff
you can pull the branch down this one was heavy enough in this example I didn't need to do that
but it's a cool feature that I've seen on both of the pole saws that I have so far reviewed.
All right let's make that final clean cut and then we can move on. All right now this is a heavy head
but I'm feeling like it jumps as I'm making these cuts it might just be this tree let's see if that
persists. So believe it or not this is supposed to be a walking path from the basketball courts
through this area past our little pomegranate grove and over towards the fire pit but this
Chinese tallow has decided it wants to be like a weeping willow and it weeps right in the path so
let's take care of this branch. A lot less jumpy that time which is nice make my final cut
there we go much better. So these Chinese tallow are evergreen and that means any time of the year
you're fine to trim them down let's take care of some of these dead branches.
Now these are so small and there's no weight on them I'm just going to cut straight through them
got our first little bit of debris in here just a leaf but let me flip it over and look
now it sheds away all of the sawdust really well. Now we've done a few cuts let's check on
our chain tightness it looks like it's definitely loosened a bit not bad but I'm going to take this
opportunity to tighten it up a little and we'll get back to it. Let's take care of this row of
sagging palms. Oh yeah no problem there you got to watch out for these stems they got like shark's
tooths on them they'll get you all right it's all right girls. Well so far all the cuts we've
made have been without this extension so let's see if it gets wobbly bouncy or harder to control
it's definitely going to be heavier on the front end now with this level of standoff but
this big old feather palm needs a little trim yeah no problem you do have to fight it a little
bit more oh look at this got a bunch of debris stuck in there this time it comes right out
yeah I like this big open port here okay let's try the hook yeah
nice much better well you can see the tool is doing a great job of lubricating the chain in the
bar but really not going through that much fluid look at that I love it. Well if you've watched
any of my other videos you know I love this ash tree that's right in the center of our yard one
thing I don't love is it hanging over our ceramic tile and possibly bashing into it and bashing
into those caps so we're going to take care of that right now I'm going to do a little relief cut
first and a through cut all right and then let's do our finish cut oh that's the first time it's
ever cut out all right let's check and see chain's not too loose certainly didn't come off
there's nothing in here binding it interesting there goes again oh it's struggling with this ash
hopping a lot that is not a very big branch it's very wet though admittedly I'm not much of a strap
guy because my microphone is right here and the strap will just rub against it and makes the
audio unusable but in this case even if I wanted to use the strap the center of gravity
is way over here here's where the strap connects it's pointless you have to carry it like this
to balance out the strap so I don't feel like taking this whole thing off and putting it over
here because then when I went to would go to reach up to actually use it it would be way up here so I
I don't think the strap has any point being in this kit I mind a common question from a viewer
would be how long is it meaning from holding it right here and actuating the trigger
how high up can I reach so I took some measurements in this configuration right
here without the extension pole the unit from the handle to the tip of the blade
is 7 feet long or 213 centimeters and with the battery and a full reservoir of bar chain oil
the unit weighs 8.8 pounds which is 4 kilograms if you add the extension pole on right here in
the center you increase from the 7 feet to 10 and a half feet or 320 centimeters
and the weight increases to 10 pounds or four and a half kilograms pretty respectable pile
well after cutting all those branches and palm fronds I think I'm more than capable to give you
my list of pros and cons first the pros the build quality on this tool is superior I love the fit
and finish of all the plastic I like the sleek look of it this head is very substantial and
the whole tool overall feels really good in the hands next will be battery life all of that cutting
you saw only lowered the battery by one bar so that is excellent next would be oil use I have
complained forever about small oil reservoirs and that you're constantly filling them every
couple cuts that is not the case with this saw the chain here you can see is well lubricated so
is the bar and yet with all that cutting we only drop that slight little amount of oil so
I love that it's lubricating but not wasting the oil and thus making you stop and fill it up all
the time fantastic next these metal poles are very stable I do not feel a lot of wobble in the
unions of them even with the third pole on when you're raising it up like that with the weight
of this head you do feel the saw swaying back and forth a little bit but there wasn't that
unnecessary play like the fiberglass poles with the rivets in them that the ryobi pole saw had
that I was really disappointed in the chain tensioner worked great I only had to make one
adjustment and that was after the initial few cuts when the tool was warming up and that chain
was getting like broken in so I don't count that against this tool I also love how easy it is to
adjust the tension on the chain you don't need any individual tool in your pocket to undo a bolt
here and then take a screwdriver to move the bar back and forth it's all done right here with this
easy little wheel and tensioning bracket here I like that a lot finally would be this chip shoot
here it is really large and very little if anything got stuck in there really only like loose leaf
debris but I never had to get in there and clean it out for worry that it was going to impede the
lubrication of the chain now the cons and I only have three first of all the tool tends to bounce
a lot when you're making the initial cut I'm not sure if the pitch of the chain might be a little
off or if the balance of the tool the angle of the head I'm not sure what it is but I did find
it bouncing quite a bit in the beginning of the cut next due to the width of the head on this side
you have the motor on this side you have the tensioning wheel I found it very difficult to see
the bar and thus know where I was cutting so if you're out on this side you have to kind of hold
the tool way out like this which is almost impossible so you're kind of better off cutting
from the left side of the tool and thus if you look around maybe like right here
holding the tool out a good foot or two away from you you'll be able to see but if you're
comfortably trying to make a cut and balance the tool against your body while doing so you
cannot straight on see the bar and that makes it difficult to find the best spot to make your cuts
lastly we can't go without saying that while we were cutting that branch on the ash tree the motor
did cut out twice now strangely it cut through the branch with no issue but when I was going
back to make the safety cut that final flush cut so that the tree could heal properly that's when
it was cutting out now the wood was wet I don't know if that has something to do with it or I
don't know if the angle was causing the tool to bind but it did cut out twice and we have to talk
about that so if you found this video helpful you please give it a thumbs up it really helps
the algorithms to start suggesting it to more viewers like you also please consider subscribing
I work really hard to put out good quality tool reviews there's a lot more of those to come
and it's free all you have to do is log in with your account and hit subscribe if you're on youtube
if you follow my videos on rumble you just hit follow there it's really helpful to the channel
thank you for everybody that's been doing that I'm going to leave a link to this pole saw in the
description below full disclosure that will be an amazon affiliate link so if you click on it
end up making any purchase it won't cost you a thing but I do get a small reward at the end of
the month now I'd like to thank Lightly for sending me out this pole saw for my independent review
with no preconceived agreement on what I was going to say in the review process the only thing they
asked for in fact was that I get this video out right around the black friday time frame and I
was happy to do that until next time thank you for watching