Enough with manual saw chain sharpening, here is the PARKSIDE cordless chain sharpener PSGA 20-Li A1

Power Machine Tools
2 followers
00:00 Why the chain must be sharpened and how to avoid wear
02:21 Unpacking PSGA 20-Li A1
03:11 Assembly
03:49 Design, ergonomics, processing
05:09 Other details and adjustment options.
05:26 LED lighting, weight
06:02 Used grinding wheel
06:35 Comparison of dull and sharp chain
08:29 Sharpening the chain on a grinder
13:30 Comparison of sharp chain
13:58 Comparison of new and sharpened chain
14:58 Evaluation and conclusion
#machine #tools #powertools
The cutting speed and performance of the chain saws is directly dependent on the sharpness of the chain.
Unfortunately, when using a chain saw, you will not avoid sharpening sooner or later with the correct or incorrect use.
You need to take care of the chain in various ways.
For example, you have to use the correct oil of the specified thickness to the manufacturer.
It is very important, because if you pour oil that is thick or rare, it also depends on the weather.
You have to watch what oil is suitable for your saw and pour the right one there for the correct lubrication of the chain.
Because even so, it can lead to dullness.
Also, if you pour hydraulic oil or used oil, it can lead to clogging of the pump and thus to the failure of the oil flow along the water line.
You will blunt the chain in the same way and you can damage the blade.
As a result, there may be manipulation and pressure on the saw to cut.
If you don't notice it, you can damage the motor or damage the electric motor.
It is also necessary to pay attention to the oil.
Also, with ordinary use of fuel wood, you can hit a skull, a stone or a wire and thus blunt the chain in a few seconds.
You don't even know you did it.
Unfortunately, you just have to feel it.
You can track it on sawdust, sawdust sizes, but it depends on the chain and its division.
We have several chains 1.25, 3.8, 3.25.
These are all different teeth and for different guides.
For example, it is battery, so here are the standards 3.8 with a width of 1.1 mm for the guide.
The smaller the chain, the more prone it is to ordinary use.
It is of course difficult to sharpen each tooth from both sides at the right angle and after sharpening, do not leave the teeth of the same size.
If you don't want to learn it, there are many other ways to sharpen the chain with various preparations.
I have prepared a battery sharpener for today's review on the Parkside chain for X20V batteries for sharpening the chain with a division of 3.8 and 3.25.
Let's take a look at it.
In the package you will find a user manual, a preparation and screws for catching the chain and a battery sharpener for sharpening the chain 3.8 and 3.25.
The design of the sharpener for sharpening the chain is at a fairly decent level.
The ergonomics are just as good.
Because it is a device for X20V batteries that are small, light and compact.
And thus it is possible to sharpen the chain quickly even in places where there is no 230 V.
Something worse is the processing.
Because it's all about plastic production.
Where the bottom base for catching the chain is completely made of plastic.
Connected to the top part via a wedge on a saw.
And of course there is also a spring for springing to the top position.
The motor part is also made of plastic.
There is a standard 4-pole motor.
Power button.
Blade for sharpening the chain 3.8 and 3.25.
LED lighting.
And a very quiet and cultivated walk.
The ability to set a depth stop for sharpening.
But it is a pity that the reverse side is only plastic.
And the base where you can catch the chain.
And thus sharpen the chain plus or minus 35 °.
Fast fastening mechanism for stopping the chain.
And such a clever stop for moving the next tooth.
For the change, there is definitely a protective cover for the visor.
LED lighting in poor light conditions can help sharpen the chain.
And there is a delayed light during the motor operation.
Weight without a battery.
And with preparations is 1700 grams.
With a 4Ah battery it is somewhere around 2300 grams.
Which is still compact.
But it is a pity that there is no fixing point for closing into this position.
For example, for transport.
For tightening, a plastic nut and a Parkside chisel are used.
With a diameter of 108 mm.
The diameter of the internal housing is 23.2 mm.
And the width is 3.2 mm.
It is a common standard for 5 euros.
The axis of the motor is directly adjusted to the M14 thread.
At the beginning, I will compare the cutting speed of the Parkside chisel.
Green version.
20 m per second.
And there is a thrown chain that is blunt.
Parkside Performance 16 m per second.
And a new sharp chisel.
Let's compare it before sharpening.
You could watch how easily the chisel can be blunt in a few seconds.
What does it mean for the saw.
It's a real pain.
If the chisel is blunt, there is no cutting speed.
The saw and the motor suffer.
Whether it is an electric motor or a combustion engine.
It is a joy to work with a sharp chisel.
Also according to the cut.
You can see a sharp chisel.
The saw does not undercut.
The cut is nice and clean.
If the chisel is blunt.
You can see.
It's crooked, it's undercut.
It can also be seen on the saw.
These are the grooves.
They form when sawing.
When the saw is only annoying.
And it's hard to cut through the material.
Let's take a quick look at it.
How did the chisel after a short contact.
On steel.
I blunt the chisel.
To see how it works.
Or does not work.
During cutting.
And how the teeth will fall.
After a short contact.
Whether on a wedge, screw.
Steel, stone.
Or simply harder material.
You can watch.
The teeth are in a very bad condition.
I definitely recommend.
Mark the first tooth of the sharpening.
Also find the shortest.
And according to it.
Start sharpening.
Straight line.
First.
I set the angle of sharpening.
30 degrees to the right.
From the beginning.
I set the angle of sharpening.
One of the shortest teeth.
Now I'm starting to grind.
First one side.
And then.
All other teeth.
On the other side.
Here you could see.
A decent grinding of the teeth.
It was a little longer.
When I look at the sharpened tooth.
It looks very nice.
Sharp and even.
I think it's pretty solid.
Again I type.
One of the shortest teeth.
On the line.
For the opposite side of the sharpening.
At an angle of 30 degrees.
When throwing.
Do not forget to detail.
After pulling the sheet.
To the top.
Then start spawning.
Line.
And just tighten.
It is very important.
That the line is not allowed.
During sawing.
After sharpening.
It is necessary to be careful.
That the cutting tooth was not higher.
As a guiding tooth.
It also serves as a simple preparation.
Which will show you.
If the tooth is protruding.
Above the preparation.
It is necessary to grind.
If it does not protrude.
It's still fine.
You could watch.
Improved cutting speed.
After sharpening the line.
On the green version.
Where the line was no longer usable.
For sawing.
Also compared.
With the black performance version.
Where it was visible.
After sharpening.
The cutting speed is almost the same.
And the performance of both lines.
It is very similar.
Of course, with this line.
I will not get to the factory values.
Because it is much better sharpened.
And I'm still trying on the green version.
Throw a new line.
And here is the conclusion of the review.
From Parkside.
For sharpening a line.
Which can save a lot of time.
Energy and money.
Because you do not have to carry the line.
Sharpen the master.
To the city.
You save 2-3 euros.
You sharpen it at home.
It is enough.
But it's not the same.
As from a professional master.
With a professional grinder.
Because this grinder.
It can be gently twisted on a plastic construction.
So it's not that accurate.
But I also think.
For home use.
For home sharpening.
It is absolutely enough.
Because you could see.
Many damaged.
And blunt line.
Then sharpened.
Compared to the factory line.
And there was only a minimal difference.
If there was any difference at all.
So I can only point out.
If you fold it.
There is no transport position.
Which would fix.
So it would not open.
So that's the only thing.
Which I would point out.
It can definitely save a lot of beginners.
Time and money.
Sharpening the line.
You can find it on LIDL.sk.
Below in the description under the video.
Also with a password.
Already in the new version.
And from me.
It's all for today.
If you liked this video.
Give a thumbs up.
Confirm the subscription.
Ring the bell.
Or join the membership.
Where you will find a lot of extra reviews.
Hi.
