Hi, I'm Mike with House on the Mend.
In this video, we're gonna be reviewing
the Lifely U20 half-inch impact wrench,
along with their very innovative U20 battery platform.
And we're gonna talk about a great sale
they're having on these batteries till the end of the year.
So let's get started.
♪ House on the Mend ♪
Now I'm not paid nor sponsored by Lifely.
They did send me this half-inch impact wrench
with several batteries for free for my independent review.
So let's unbox it and see what comes in the package.
Well, this is the first Lifely tool I've reviewed
with such sparse packaging.
You've got this piece that was over the battery
that's got a hole in it,
and this box is just all crumpled.
Now, I will say there is no issue,
no cracks, no scratches, everything looks fine.
Inside this box is our U20 battery,
and we get a two and a half amp hour battery.
Very nice for a power tool like this, good size.
That's got some weight to it.
I really love the orange banding
against the black and white.
That's their standard color profile.
I think it looks sharp.
We've got the battery life indicator on the battery,
and then right up here is what looks like
is a power button, and then three different modes.
Listen to that speed difference.
And three.
Wow.
Little LED light right here,
and then a nice, easy battery release.
The one on the blower was really hard,
but this one is perfect.
So this little slot right here on the battery
is what engages the holder here,
and then when you press the button,
the springs on the back of the tool
will push it out for you.
Now, right here and on this side,
so ambidextrous room for the included belt clip.
That is great.
So there is a slot right up here that this notch goes in,
and then you go through this hole
with the included screw and tighten up for your belt loop.
So if you look at it,
the tool will be upside down like this on your belt,
and all the weight of the head and the motor will be down.
We've got a nice half inch head on here for the impact,
and we've got the little grommet right here.
This helps to retain the socket heads
that you put on here with that little guy.
Otherwise, they just fall right off,
but it doesn't have any kind of release
with a ball bearing like you would have on a socket.
There's just no way to do something like that.
So they use these little washers here for retention.
Standard buttons of forward, reverse,
and middle is lock.
So if you're climbing up and down a ladder,
nothing can hit and start spinning on you
and get your clothes all bound up.
I've had that happen to me before.
It was a great lesson to always use the lock.
Brushless tool, that's nice.
That adds to the longevity of the tool.
Really good.
All right, let's take a closer look
at this very sleek battery that you get.
It's got the same sort of carbon fiber graphic
along the sides of it.
On the top of the battery,
you get a battery life indicator.
I love that.
We can see here out of the package,
we have three out of four bars.
Now on the other side, if you look at this picture here,
you will see a standard USB port.
There is a negative and a positive port.
Those are the ones that go into the tool.
And you have a USB-C port here.
So this battery is multifunctional.
Not only can it run your tool at 20 volts,
but it also has a USB and a USB-C output of five volts
to charge any of your electronic devices,
such as your phone, or in my case, camera gear,
which is really, really cool.
I have seen attachments that go on
some of the major tool brands' batteries
and with that attachment, you can charge electronics,
but it's rare to see a battery
that has two ports for that kind of thing already built in.
Now, speaking of the USB-C port,
which is the one to the far right
of this face of the battery,
that is the port that you charge this tool with.
So there's no cradle or any other charger.
You can charge this with a standard household USB-C charger.
In fact, the battery comes with this cable right here
that is pretty cool.
Not only is it a USB to USB-C,
so you can charge with it
or you can charge other things with it,
but this one actually breaks free here,
folds back, and you have USB-C to C.
That's really cool that they include that.
Now, speaking of charging,
what you're looking at here
are three very common household chargers.
This little guy here is only five and three quarters watts.
This Amazon one is nine,
and then this Apple one is the largest of them,
all charging at 10 watts.
However, if you look on the bottom of the battery
and you read the data,
you'll see right here that this battery can be charged
at a maximum of 45 watts.
So that's four times the power
of even our largest household charger.
So my recommendation is not to use household chargers,
but instead to buy one of these.
I got this one off of Amazon.
It is a 45-watt charger,
and it is not very expensive.
It looks like any other charger,
but when you deplete these big batteries down,
this will charge it in a quarter of the time
that a charger like this would.
Here are some name-brand batteries
that you're probably aware of,
and if you look at the actual perimeter
of the Lifely battery,
you'll see it's just slightly bigger
than some of the batteries.
However, if you look at this view,
you'll see that it is thinner
than all of the competitor batteries.
All right, with our 45-watt charger,
I'll plug into the battery,
and you can see we immediately start getting a readout
on the battery life indicator.
Three of the bars are solid,
and we have one blinking bar.
Now, in addition to the standard U20 battery
that Lifely sent me with the tool,
I also received the U20 SE battery.
This is something they're really excited about.
Right now, until the end of 2024,
you can buy this two-amp-hour battery
for $9.99 with free shipping.
What a deal.
It has all the same functionality.
It has the battery life indicator.
You can also use it to charge your devices.
The only difference I saw is it's banded in gray
instead of black to probably designate that it's the SE,
and it has only the USB-C port,
so it doesn't have the USB port
that the standard U20 battery has.
All the rest of the functionality is exactly the same,
and it can accept the fast-charging 45-watt max.
So what a bargain.
You can buy these for recharging devices,
just you don't need a cradle to put it in.
You could just buy these for cheaper
than any cell phone charger
or small electronic device charger available on the internet.
The first thing I did after charging the batteries
was attach this really cool 1⁄2-inch square
to 1⁄4-inch hex adapter to the tool
so I could insert a drive bit
and use it throughout my recent video
on framing and finishing a basement food pantry.
For days, I drove 2½-inch structural screws
and several 3-inch concrete anchors,
as well as more light-duty uses
like wiring the lights and the motion switch.
All that work with a single 2-amp-hour battery
only dropped at approximately 50%.
I noticed the tool felt very lightweight,
so I decided to compare it to my other Impact wrenches,
the Ryobi 1⁄2-inch
and the smaller Milwaukee M12 3⁄8-inch,
each with comparably-sized batteries.
The Ryobi, with only a 1.5-amp-hour battery attached,
is the heaviest at 4.9 pounds,
the Lightly, a full pound less at 3.9,
and the diminutive 12-volt Milwaukee is 2.9 pounds.
These side-by-sides show the size difference as well.
Then I moved on to the truly rigorous testing.
Well, you can't review an Impact wrench
without removing some lug nuts,
so out of all the vehicles we have,
our Toyota RAV4 has the smallest torque spec
of 79 foot-pounds,
our Land Rover that we're building out for my daughter
is 85 to 95,
and our Ram Promaster 2500 van
has the highest of any vehicle I've ever owned
at 145 foot-pounds.
So let's remove a couple of the lug nuts,
and I will first adjust my torque wrench
to 145 foot-pounds.
As you can see here,
this is a 21-millimeter Impact socket,
and we are right there.
Good, and I'm gonna take that same socket,
put it right on our Lifely Impact wrench
that I have set to the highest power.
It seems fitting for this.
Let's turn it to back it off,
and I'm gonna put some hearing protection in,
and then we'll get started.
All right, let's see how we do.
Wow, no problem at all.
Look at the size of that guy.
All right, let's put it back in,
and take this one out.
Yep, no sweat at all.
Pretty impressive.
All right, I'm gonna tighten these back up to spec,
and then we'll move on to the next test.
Well, I was really hoping
to get this Impact wrench delivered on time
that I could use it to build my gazebos out in the backyard,
but that didn't happen,
so we're gonna take some leftover lag bolts,
and we're gonna test them on this pressure-treated 4x4,
and Maverick, obviously, is here to help.
Now, whenever I use lag bolts in any project,
be it garage storage, shelving, or building the gazebo,
I always pre-drill,
so I took a 316th-inch bit and drilled into this,
and let's see how we do.
This is a 716th bolt
that's actually a 516th thread, 716th head.
No problem there.
Let's switch over to a 1⁄2-inch head
on a bigger and longer bolt.
Look at this guy.
All right.
Took a while, but it got that one.
The last one I have is even thicker,
and it has a 916th-inch head.
Pretty impressive, pretty impressive.
All right, so I know I'll get complaints
that I pre-drilled in the comments, or maybe I will,
so let's make it even harder.
Let's drive in the same three without pre-drilling,
and this first one,
we won't even use an impact-rated socket.
Let's just use a regular old socket
right out of my hand wrench kit.
Easy.
This big guy.
All right, so everything you've seen me do,
including the last project with the pantry,
has been on this one battery right here,
and we have finally gotten it down to the point
where that battery has died.
That is amazing.
Let me grab a fresh battery,
and we'll finish the rest of our testing.
All right, I got a knee pad for me and a fresh battery.
This is a 2 1⁄2-amp-hour battery that came with it.
Let me get my work gloves.
These are my favorite new work gloves that I'm testing.
These are by Ty Lee, and they are puncture-resistant.
There's a review coming on these soon.
Here we go.
Wow, so did you see this come off?
I've noticed several bits.
This one here that is a hex bit,
and just now this one are coming off,
and if you look up top here,
there's a little ring, very common,
and I noticed that my bits are slipping off
because I think this ring needs
to be stretched out a little.
I tested these same bits with my Ryobi impact wrench,
and it holds on to them much better.
All right, let's switch over to 9 16ths,
and we'll drive this big guy home.
Wow, that fresh battery is crushing it.
And there we go, so impressed.
So I think that's more than enough variety
of real-world testing for me to say
that I highly recommend the Lifely impact wrench
and can give you the pros and cons.
First, the pros.
The build quality is just fantastic.
Anywhere that there are seams
of injection-molded plastic coming together,
all those edges are nice and smooth.
There's nothing sharp about it, just really good.
Ergonomically, feels good in the hand.
All the buttons are right there.
You don't have to reach for anything, excellent.
The battery life is fantastic as always.
I love that you have the dual-use
with the tool as well as charging electronic devices
all built into one battery with no attachment needed.
And the 999 for the U20 SE is just a great value.
Finally, the power is fantastic.
I drove all of the screws and concrete anchors
in on the low power setting with no issues whatsoever.
And then as you saw, I upped it to the high power setting
for the lug nuts and the lag bolts,
and you saw the results in real time.
Now the cons.
Out of the box, this little retaining clip
that goes around the half-inch head
is not wide enough in circumference
to properly hold on the sockets
nor the quarter-inch hex attachment.
While using them, they fell off periodically.
Now I think you could easily remedy this
by taking a flathead screwdriver
and prying that open a little bit wider,
but none of my other tools came with that issue,
so I wanted to point it out.
Now I'm not sure why in the reverse setting,
the tool only drives for a fraction of a second
before shutting itself off.
Now that doesn't happen under load,
but when you're getting to the end of backing out a screw
or a lag bolt and it cuts out like that,
it is kind of annoying
and I don't understand the purpose of it.
So if you found this video helpful,
will you please give it a thumbs up?
It's really helpful to the algorithms
to start suggesting this video to more users like you.
Also, please consider subscribing.
I work really hard to put out good quality tool reviews
and other detailed content.
There's a lot more videos to come.
Speaking of that,
if you wanna see more of this tool in action,
our next video is going to be installing an attic ladder
and attic storage with several sheets of plywood,
and I'm gonna use the Lifely Impact Wrench
exclusively for that.
I'd like to thank Lifely for once again sending me a tool
with no preconceived conditions of what I was gonna say.
They didn't ask to look at the video ahead of time.
I have had other companies do that.
I refuse all those tool reviews.
I think it shows a lot of bravery
for them to just send me the tool and let me review it.
Their only request was that I specifically go over
the U20 SE batteries and talk about the sale
and that I got this video out in time
so that Black Friday and all the rest could take place
and you could take advantage
of what is a great value with those batteries.
Now, I'm gonna leave a link to this tool,
to the batteries, to the attachment,
as well as the 45-watt charger.
Full disclosure, those will all be Amazon affiliate links,
so if you click on them and end up making a purchase,
it won't cost you a thing,
but I do get a small reward at the end of the month.
It helps to justify all the time it takes
setting up camera angles and lighting
and things for these videos.
And then I will also, in the description below,
leave the links via Lifely's website, which is excellent.
There's a lot of other tools on there
that you should check out.
Until next time, thank you for watching.
Hi.
Yeah, you're actually not helpful.
I'm recording right now.
I don't know if you could, excuse me.
Can you at least come over here?