Dewalt 20 Volt Max Impact Wrench DCF911B

Power Machine Tools
2 followers
Alright guys, we got the DCF-911. This is a mid-level impact driver. I had the big Dewalt one,
but I was tired of dragging it around. It's too heavy. Let's see if this is going to work for me.
Let's check it out. Sometimes when you buy, especially if you buy at the store,
they'll give you a used tool. So there it is, half-inch drive. Check it out. I like that it
has the three LED lights. I'll show you what that looks like at night. You'll be able to get on
there pretty good. So there's the lights coming back at you, and that's what it looks like staring
at it. Everything's pretty much the same with most of their drills. It just looks the same,
you know, the same grip. You can put your little hanger on either side. You can go right here or
right here. Same with all their drills, but let's try this thing out and see how it works. We'll go
ahead and mount my 23. So much lighter than this big one. This one's like seven pounds. This one's
2.2 pounds. Let's talk about the specs real quick. Okay, so you got a fastening torque of 250 foot
pounds. Breakaway torque, a max breakaway torque of 400 foot pounds. Impacts per minute, zero to
3,200, 3,250. Tool length, 5.2 inches. The weight is 2.2 pounds. No load speed, zero to 2,800 rpms,
2,850 rpms. It is a half-inch drive, and here's the code again, DCF911B. If it's just a bare
tool, you'll see the B. If you buy the kit, it might say something else, but right now it's currently
119, and we are in November of 2024. So check your area and see how much it costs you.
I want to make sure these are torqued down to 97, because that's what this truck calls for.
Got a little 2-amp power battery on here. It is about two-thirds the way full. So much lighter.
I hope this works out. I like that, but it's just so light, so light in your hand.
Does not even struggle that much. Hey, you want to do one? You can just get the job done real easy.
This was about 119 right now on Amazon. The only thing I don't like about this drill, and a lot of
drills, is when you click it in reverse and you're about to take your tires off, when you pull the
trigger, you're so close to the selector that you can accidentally hit it while you're trying to
reverse it, but you're actually tightening it. So I wish they would put this up higher to where
there's no way you could hit it. That's just my only problem with it. Everything else is perfect.
Again, that coat is DCF-911. It's 2.2 pounds. I'm going to be using this one a lot more than
I used the other one, because I just use this for light work here at the house doing auto work.
If you like it, hit the like button, subscribe, and we'll see you on the next video. Take care.
