Could this be a new Lidl 3_8_ Parkside Performance impact wrench_ Tested against Milwaukee stubby!

Power Machine Tools
2 followers
In this video, I put my custom-built 3/8" Parkside Stubby to the test. It features a bespoke anvil and bushing, built on the Parkside Performance PDSSAP B3 base, and I'm comparing it against the Milwaukee Gen 1 3/8" Stubby and the Parkside Performance PPDSSA 12V Impact Wrench.
Each tool was tested multiple times to gather the most accurate data, and what you’ll see here is the best run from each tool. Up to 300Nm, the performance is consistent, but at 340Nm, there were significant gaps which were down to me being unable to consistently achieve 340Nm.
👉 Don’t forget to like, comment, and subscribe for more reviews and tutorials on DIY car repairs and maintenance!
#machine #tools #powertools
Hello and welcome to the sorriest excuse for a tool channel you've ever tuned into.
But on a serious note, there is a lot of cool stuff happening around here,
so I hope you subscribe and stick around for more.
And now let's get into today's topic.
So I saw this video on BalfourM24's YouTube channel,
which I'll be linking in this video's description,
where they show that Lidl will finally be releasing a Parkside Performance mid-torque impact wrench.
Release date is yet unknown,
but it's about time, Lidl.
You guys have been a bit behind the curve on this one.
We've all wanted one for a long time now,
but better late than never, I guess.
For some time now, Parkside have had their 12V impact wrench.
And don't get me wrong, it's good for some smaller jobs,
but I have to admit, there are times when I come across a car bolt
that's just too much for it.
And I'm talking about using it with a 5A Parkside Performance battery here.
Because if you use it with a smaller battery,
those problematic bolts pop up way more frequently than you'd ever expect.
If you don't mind spending a little bit extra,
you can grab a Milwaukee M12 first generation stubby.
I used one, of course, because a new kit is still a bit pricey
for this channel's limited finances.
But in both cases, it is fantastic for automotive work.
That 3.8-inch anvil is perfect for anything on a regular car.
I have no idea why the 3.8-inch isn't as popular in Europe.
Unfortunately, Parkside doesn't have a 3.8-inch impact wrench yet.
And honestly, a budget 12V tool can only go so far when it comes to power.
But little has another great platform.
The Parkside Performance Impact Driver.
Which, with a custom anvil and bushing,
can actually be converted into a very nice 3.8-inch impact wrench.
Now let me interrupt myself to remind you to like the video,
subscribe and leave a comment if you enjoy the content.
Because that really helps out a lot.
I made a video on this conversion kit earlier,
and as promised, I've shared the blueprints with a couple of sellers from AliExpress.
So I'm hopeful we'll see a conversion kit appear on AliExpress soon.
Now if by any chance anyone from the little marketing team is watching,
how's this for an idea?
You could actually design your very own 3.8-inch impact wrench
using the B3-PD-SSAP platform.
It's already a fantastic base,
and if you tweak the ergonomics a bit,
like angling the battery pack like the Milwaukee does,
you've got yourself a winner.
Alright, enough with the talking.
Let's get into the testing section.
I'll be using a 3.8-inch to 1.5-inch adapter,
because I couldn't find a 27mm 3.8-inch socket.
The adapter is going to handicap the 3.8-inch Parkside and Milwaukee a bit.
But the 12V Parkside Performance Impact Wrench won't be using an adapter.
So hopefully that will make it look at least a bit better.
First up, let's see how they handle 150Nm,
pretty standard for, say, car wheel bolts.
The Parkside Performance 12V Impact Wrench is using a fully charged 5A battery,
and is on max settings.
The modified Parkside with the 3.8 anvil is using a fully charged 4A 20V smart battery,
and is also on max settings.
But as I said at the start of the video,
also an adapter so we can use a 27mm socket.
That adapter will cost it some power, so what do you think?
How will it do?
Anyone surprised by that?
Now on to the M12 Stubby Gen 1,
using a fully charged 12V 4A battery,
and also using the adapter so as to accommodate the massive socket.
And straight away we have the M12 battery problem.
Get some vibrations going and the battery falls out of the tool.
Looks like I'll have to hold the battery in place for the rest of these tests.
So here are the final results for the 150Nm test.
And as you can see, the Gen 1 Milwaukee and 12V Parkside are closer than you would expect.
But the 20V Limited Edition 1 of 1 Specials is in a different league.
And yes, I know it has some extra volts in its battery,
but that's not the point here is it?
Now let's try 200Nm.
I need some of that special Milwaukee coloured duct tape to hold the battery in place.
And now the real differences between the 12V Parkside and M12 Milwaukee start to show.
While they both got the job done, the Parkside was exactly twice as slow.
But the 20V Parkside stubby is looking strong.
A small 50Nm bump up to a total of 250Nm is next.
And just look at how the extra 50Nm changed things.
The performance gap between the 12V tools is now considerably larger,
while the 20V homemade stubby is just asking for little to put it into production.
Let's pile on another 50Nm on top of that for a total of 300Nm this time.
The 12V Parkside performance impact wrench is cheap and can get the job done.
But looking at this, you realise why the Milwaukee costs so much.
And that's the old one with a 4Ah battery.
Imagine the new Gen 2.
But with that said, let me know what you think on how the 20V Parkside stubby is performing so far.
Next up, I tried to max out my torque adapter at 340Nm for this final test.
However, my extendable ratchet is only so extendable
while I could reliably hit 300Nm, I can't say I managed to do the same at 340Nm.
So take these following attempts with a pinch of salt.
Now let's look into the supposed 340Nm test results.
Parkside's 12V impact wrench is rated for 350Nm and it had to push beyond the 10 second mark,
but in the end, it got the job done.
However, the Milwaukee which is rated for 339Nm was done in just under 5 seconds.
And check this out.
The homemade 20V Parkside performance with the 3.8 inch anvil conversion
just crushed it with a time of 2.3 seconds.
And let me show you what 2.3 seconds looks like.
So here's the big question.
Would you buy a 3.8 inch stubby impact wrench if Parkside made one?
Or would you be interested in picking up an anvil conversion kit
for your own Parkside impact driver if one becomes available on AliExpress?
Let me know your thoughts down in the comments because I'd love to read what you think.
And don't forget to like, subscribe and stay tuned for more tool reviews.
