Video Chapters: 0:00 - Intro 1:36 - Removing the Hood Insulation Pad 3:45 - Sound-Deadening Hood 5:37 - Cleaning the Pad 6:09 - Re-mounting the Pad 6:48 - Conclusion
Views and recommendations expressed are my opinion based on hands on testing, experience, and results.
Hi, I'm Mike. Welcome to my Waffle Square, where I obsess about things and you get to benefit from it.
Well, in episode 11 of our ongoing series where we are refurbishing this 2006 Land Rover LR3 with
the V8 petrol engine, we are going to be focusing on this eyesore of a hood insulation pad by taking
it down, spot treating all these stains, and if that doesn't work, painting the entire thing with
a fabric paint. So let's get started. Well, I'm not exactly sure what caused the stain you see
here on the hood insulation pad, but I have two ideas from speaking with the previous owner and
then the way I found the vehicle. Number one, it could have come from the overflow bottle getting
a crack in it. I had seen a receipt and the previous owner told me that she had replaced
that bottle not too long ago. I think it's a couple years ago if the receipt is correct.
And number two, it could have been the air bleeder valve that's right up on top of the engine because
when I bought this vehicle for my daughter, this cover wasn't on it. It was sitting in the back
seat and that air bleeder had failed and been replaced by this little straight barbed piece
of plastic. So maybe that could have shot. It's a lot closer to it and created the stain. Nonetheless,
we're going to fix that today in this video. So I don't want to just sit here and spray cleaner
and try to scrub it down or anything like that because we've spent so much time making the engine
well look pretty. So instead, I'm going to remove it. There's just a bunch of these Christmas tree
style door panel fasteners on their retainer clips, they call them. So let's pop all those
off and get to work on it. All right, I've got my handy little panel removal tool.
Let's get behind here and just start coaxing out these retainer clips.
This is really flimsy metal here. Oh, there we go. That was loud.
This panel tool is at quite an angle, so I'm just using a flathead screwdriver to get these
three center ones and it seems to be working pretty good. All right, and there we go.
I'm going to be replacing all of these retainer clips, so I don't mind if any of them broke.
As I looked underneath the pad, not only do I see the windshield wiper fluid tubing,
but also wiring going to each one. So they're actually heated so that they don't freeze.
That's pretty cool. I didn't know that. So the retainer clips are about 16 millimeters long
and nearly nine millimeters thick. And I have this kit that I got off of Amazon full of all
sorts of different ones, and I think these bottom ones are going to work out just fine.
Well, now's as good a time as any to get in here and clean everything under the hood and then
follow that up with a little bit of spray wax. Now, while we've got the insulation pad off,
there's one more thing I want to take care of. If you listen to this right here,
you hear how you get the resounding kind of a sound. I want to deaden that
with a strip of this kill mat. This is a self-adhesive back, so I've wiped everything
down with rubbing alcohol. I'm going to cut this in half and slip a piece of that and roll as much
as I can into place. You just want to roll out all these little perforations until it's smooth.
That way you know you've done a good job on that. That'll cut down the
boi-oi-oing kind of sound. And then in all the areas like over here and up here
where there's a gap, looks like some sort of glue has broken away,
I'm going to use some of this Noiko mat. This is sound deadening. I'll slip that right into here
and that'll instantly take care of that.
All right. See that? Wump. Wump. No, whoa, whoa, whoa, whoa, whoa, whoa. So that reverberation's gone.
I think I'll put one more piece right there to quiet that knock down. But over here, it's quiet.
Up here's a lot better. And there we go. Nothing. Well, I've been testing this Ryobi Swift Clean
that you see here in this video on my other YouTube channel. I'm going to have a full
review there. I'll leave a link at the end of the video. And I'm happy to report after
quite a bit of elbow grease, this turned out really good. Now, I had considered all along
painting it with fabric paint once I cleaned off the initial dirt. But when Aspen got home,
this was the verdict. What do you think, Aspen? I approve. Good. That's all I need to hear. Let's
put it back on. I've got my little grip mat full of some new panel clips. I'm going to put some
safety glasses on in case anything chips out on me. And just in case we need it, I've got a kind
of hard rubber mallet that can get into these spots if we need to drive them home. Let's get
going. Go. Well, this was a pretty quick and simple project, but it made a dramatic difference
and I'm so happy with the outcome. So if you found this video helpful, you please give it a thumbs
up. It really helps the algorithms to start suggesting it to more viewers like you. Also,
please consider subscribing. I'm working really hard to put out good quality content. There's a
lot more videos to come on this vehicle and it's really helpful to the channel. All you have to do
is log in to YouTube or Rumble and click on the like or the thumbs up. It's super duper helpful.
I appreciate everyone that has done that. Now I'll leave links for everything, including the
vinyl paint that's safe for this kind of fabric in case you don't get the same outcome I did. Now,
full disclosure, those will be Amazon affiliate links. So if you click on them and end up making
a purchase, it won't cost you a thing, but I do get a small reward at the end of the month. It
helps to justify all the time it takes to set up all the cameras and the lighting and everything
to record these videos. And it also helped me recently get this tummy tuck. Looks great, right?
Now for our next video, we are going to be fixing the driver's side fog light that was broken when
we bought the vehicle. I'll show you where I sourced the replacement light and we'll put it
in together. Until then, thank you for watching.