In this video I replace our boring stock stereo with a TopDisplay 12.1” Touchscreen stereo specifically made for the 2013-2014 Ford F-150. It is a true “plug and play” installation, has Wi-Fi and Bluetooth, Android Auto or Apple CarPlay, and looks like it came from the factory. I also install a backup camera.
Mike upgrades a 2013 Ford F-150 with a 12-inch Android-based touchscreen from Top Display, replacing the monochrome stereo and adding a backup camera. While the unit offers a seamless factory fit and easy installation, it is marred by significant barrel distortion in the camera image and inconsistent Bluetooth connectivity.
Hi, I'm Mike. Welcome to my Waffle Square, where I obsess about things and you get to benefit from it.
Now in episode two, where we are updating Aspen's 2013 Ford F-150 with the EcoBoost engine, we are
going to be replacing this tiny little monochrome screen for her stereo. Look at it. It's about the
size of my wallet for this beautiful 12-inch touchscreen. Complete one-piece replacement
for the stereo unit in the vehicle. So let's get started.
Brought to you by Waffle Square.
Now, if you own one of these Ford F-150s and have this tiny little stereo right in the center of the
dashboard, you'll know it's not very interactive. There's some push buttons along the side.
There's no touchscreen functionality, and also I could not get it to connect to my phone. Aspen did
with a cable. Nonetheless, Top Display reached out to us knowing we were fixing up Aspen's new-to-her
truck and offered to send us a full one-piece true plug-and-play replacement stereo, and we
jumped at the chance. Now the website is super easy to navigate. There is a drop-down menu where you
put in the make, model, and then year, and it'll bring up however many, if any, stereos are available
for your vehicle. Now in our case, we chose the base model, but for a hundred dollars more, they
do have one with a double the ROM, double the RAM, and also LTE capability. So if you purchase a
service plan with your provider, you could have internet inside the truck. We didn't need any of
that for a 16-year-old driver. Now the stereo is on the Android platform, so it comes pre-installed
with Google Maps and the Google Play Store, meaning you can download with its built-in Wi-Fi,
Spotify, YouTube, whatever kind of app is available on that platform. You also have your choice of
Android Auto, or if you own an Apple, Apple CarPlay. Now the screen, it's 12 inches. It's
beautiful, vibrant colors. You wouldn't believe that it's 720p because it looks really good.
Now in addition to the complete stereo replacement, this one-piece unit also replaces all
the functionality of the HVAC system. Right on the screen, you can control temperature, you can
control fan speed, whether it's going up to defrost or blowing out towards you or the floor to your
feet, whatever you want, just like the existing unit, but all on the touchscreen. It's pretty
cool. Now for the backup camera, I found and purchased with my own money this really cool
tailgate handle replacement that has the camera integrated into it. I'm going to show you step
by step how to install that backup camera, how to run the wiring all the way up into the passenger
compartment, then how to remove the existing stereo, how to wire up this deck, and then
fully install it, test it, and review it. Come along with me. Now since we're going to be
integrating a backup camera into the head unit install, I want to do that first. So I'm going to
be replacing this factory handle with this one right here that has the backup camera built in.
How great is that? I'll leave a link for it. This entire piece is the access panel for where
the handle is. There are eight t30 bits. Next we want to remove these two 10 millimeter bolts.
Now I'm supporting the weight. I want to reach in before we pull out the handle and take out the
lock assembly. So pull out this little pin. That is a retainer clip and then the lock
slides out and in our case that is obstructing its removal so it's going to be a lot more
easy now to navigate. Yeah there it goes.
Excellent. Now right before I carefully fish this wiring for the camera through
here, here, and over to a nice safe spot on the tail light where we can hook it up to this big
loom and run it all the way to the front of the vehicle, I wanted to go over these little jump
switches because we have access to them here. So you see these little jumpers on here? Right here
and here. By default the white wire is set to NTSC which is a form of camera footage,
frames per second kind of thing that we use in America. If you want to pull that out you'll get
the European style which is PAL. This green one on the other hand by default has these lines turned
off but if you end up liking these lines better than the ones that are pre-installed in the
software of your head unit then you can turn those off in the software and you can have these come on
by pulling that jumper. I have brought up the wire right here from the tailgate latch
and I've brought up the loom that's going to go all the way to the front of the vehicle. I made
this connection right here, zip tied it together, and then I'm going to zip tie it to this wiring
harness right here so that it hangs this way shedding water away from this connection. Coming
off of the main loom you see these two connections here so you have a power and a ground. The power
is for the backup light so if you want the camera to only activate when the backup light comes on
you can power it up right here to that. I don't care for that for two reasons. One there's going
to be lag time when the camera powers up. I'd rather have it running full time instead of having
that lag time and two I want to be able to refer to it in the camera while the vehicle's running
at any time if we're pulling a trailer or something but what I am going to do is take the other side
the ground that's on the ground and I'm going to make a little ringlet connection and right here
I'll make a clear spot of paint which I've already tested for continuity. It is a ground
and I'm going to run a self-tapping screw right through there so that the camera is already
grounded. It's coming back down from the tail lamp we're going to take the leading edge of our loom
and just start following this main wiring harness around the frame here as you can see right there
the center of the screen all the way up towards the front of the vehicle and we're just going to
attach it to that main wiring harness with zip ties. So we are all the way up to the driver's
side floorboard and this little spot right here feel how that's squishy that is the like a sticker
that's the entrance we're going to use in and then we'll run the wiring all the way up here
and into the dashboard we'll come back afterwards with some marine adhesive and we will seal that
back up. Now because we're going to be working around the airbags in the interior dashboard
area I disconnected the battery we want to give it about 30 minutes for everything that might have
been holding power capacitors and such to bleed down and as always when I do that I trickle charge
the battery in the meantime. So with our camera wire finally ran all the way to this point let's
start removing the trim here now to make it easier to remove this piece of trim we want to first
remove this piece of trim underneath the dashboard here there's two bolts that are seven millimeter
there's one I've got my awesome little grip mat here with all these little
stations inside of it to help me keep track of the screws
once their screws are out by carefully pulling this towards you like this it'll come out now
I'd love to just put the key in and move the shifter down but we unplugged everything to
protect us from the airbags so I just have to be a little bit patient and work around
that shift knob there we go okay now we have access to this piece of trim here pull down from
the bottom disconnect the four-wheel drive selector before we switch places there is another
seven millimeter bolt right here at the top of this piece let's get that out and the one down
here by the fan dial so to get this piece of trim out it's a little bit more involved because we
have to remove some bolts where the airbag is being held underneath to get to a bolt right
here that pulls holds this trim in so let's get to it pull down your glove box squeeze
in on both sides until it releases all my daughter's stuff falls now up here as you
can see in this picture there are three eight millimeter bolts with those undone you can
gently pry the rubber bit here so you can get your fingers under it
there we go now all we need to do is slide that out of the way enough so that we can get to that
bolt right there and just for fun we switch back to seven millimeter for this one it's funny how
that's like copper colored okay that one undone come underneath and gently start pulling up this
trip yes easy now while we're at it this is a perfect opportunity for me to replace this broken
h-vac vent go same thing as the other side two more bolts right down below these two are two
more just like it and then at the bottom right underneath the temperature and the fan are our
last two now we gently start overcoming all the little pins in here
there sweet as you imagine we have a bunch of cables here holding this faceplate on first of
all we have the traction control and then the h-vac system as well as the hazard lights so
i'm just going to reach behind here unbutton all those and there's only two all right okay now we
want to get this little bitty tiny screen and the cd player out with all these bolts along here what
do we got eight start with little tiny man first and then this guy is still locked in way back here
with a phillips screw all right oh quite a bit here we have the antenna fiber optics and two big
wiring harnesses right hope that's not important so we're going to need to retain this traction
control button and it is held in on the back side here we have to squeeze a couple of
black retaining clips and it should give free forward watch this
yeah cool
sweet
rear view camera and then we want to put the gps antenna right up here underneath
this panel so let's pull it out it's also seven millimeter
all right i found a good flat spot in there for the gps i always clean it off with alcohol first
better adhesion all right let's go through all the wiring here first of all we removed this
traction control from the original set so let's slide that into place
hear it click yes good next let's do this one this whole bundle all we really need is the microphone
that goes right here good next is this one this one here let's plug it right in good that is
your bluetooth and wi-fi antennas this is the particular camera that's going to
plug into our backup camera next let's do our hvac and hazard lights connector
then this whole harness here gets hooked right into here backwards there we go good still working
with the steering control inputs there's this one nice over here we have the gps
that we're going to attach when we go to the dashboard here is the antenna wire we're not
using the 4g lte but if you wanted to get a service there was a couple of antennas that
would come with a different unit and then now we're going to take this whole thing and start
plugging it in along with these two up front so to maintain the functionality of that usb adapter
input there which might be good for downloading camera files or updating software that sort of
thing you track this wire all the way up and it comes to this box right here this cable
well included is this adapter that clicks into that and then you run it all the way back down
and it's going to go into the head unit right here well it was so tempting to just clip
the microphone right there straight down but alas i did end up routing it all the way down the a
pillar it just dips right down through here very easily if you reach up through this little access
door pull it down i ran it across and now it's waiting for us right here this makes me laugh but
cost savings wherever you can you have to remove the old clips six of them from the old unit and
put them on to the new unit so it can clip into the dashboard all right i have a little stool
from inside that fits perfectly on the hump here and this is the backside of our new head
unit here's the top here's the bottom let's start making some connections there's the antenna
gps here's our main power cable
good here's the amp control
here's the hazard lights and hvac area good this is that usb adapter
this is our steering wheel controls
here's our microphone for cell phone calls
this is for our camera
we still need to supply power to the camera i'm hoping that this unused one here
is going to have the yellow power wire we're going to test that all right let's see what happens
wow that is pretty
all right this is our volume yes now obviously we don't have a cd player anymore so this must be
a wave file for this unit so you can test the sound
that sounds amazing in here to my ears all right so what if we turn the fan on let's test that
yep okay good that works how about our let's turn this down how about our hazard light
yep all right going into the settings for android brings up internet so i already logged
on to our internet you can see it right there next let's go to bluetooth so to pair a new device
it says it's going to be f-150 when it comes up let's check on that there i am that was easy
next let's come over here and let's test to see if we have power for our backup camera
because right now that is pretty sweet but we don't have the camera working
all right we're all set for dc let's check here thinking this yellow might be power on
sure is that's good now how about if we turn the power off the unit goes off
hopefully so does this nope it's on the whole time
that's not good it must be a backup power how about this little red one right here
what if we turn it on
yeah okay so this red one on here is our accessory
that should work for our backup camera so i'm going to splice that in
all right i think i have it figured out reverse yes great now i'm curious to see if these will
turn probably not they don't seem to but all right i'll take it okay now i'm going to shut
everything down unplug the battery again charge it back up because we've been playing around
and button everything back up so we're sitting here messing with it trying to figure out a way
to shrink the image down it is so wide it looks like a big circle and really hard to have that
be your bumper and try to figure out whether or not you're going to hit something so we're messing
with these controls over here and nothing really seems to change yeah i'm really not
impressed with that barrel distortion that you get out of the backup camera i think it's because
it's being stretched into portrait mode instead of like a 16 by 9 landscape mode i reached out
to top display they were really cool about getting me in touch with one of their technicians and
after going back and forth with him sending him pictures of what it's looking like
he said there is no software fix for that he just recommended i buy a different camera and i don't
know why i should this camera is meant for the ford f-150 it's integrated into the latch what i
think should be done is they should put some sort of control or screen or something to shrink down
the actual image to a 16 by 9 and i bet that would solve that barrel distortion so what's it
like using this stereo day-to-day how is the user interface well i took it out to get it washed and
this is what i discovered trying to connect to it all right well it's been a while since i got in
here aspen's been driving it for a couple months to make sure it hooks up bluetooth all the time
so let's see if it still remembers my phone fires right up looking pretty okay so it doesn't look
like it has remembered my phone or it's also possible she deleted mine so let's go over
and connect via bluetooth it says f-150 which makes it so easy i failed that time
my second attempt well that ui is working good still not showing that we're hooked up
so the third attempt is finally connected
all right so there we go let's go here and sure enough i'm connected well that took way longer
than i remember the first time all right let's see if putting it in reverse makes us lose
the music and the connection so you can see we still have that very ultra wide picture that's
not very pleasing when you're backing up but it's working perfect all right just got through with the
car wash let's make sure we still connected unsuccessful third try again we're back i see
a pattern all right we just stopped at the gas station let's see if third time's a charm so
once again it didn't hook up and it's also perceiving that the front driver's door is
open which it's not all right so every time i'm having to attempt to connect three times
now my daughters love to tell me i'm old maybe i'm out of touch with today's technology so i
talked to aspen she's pretty savvy with her phone and she's been daily driving this truck using that
stereo for two months she tells me that every time she needs to connect to the stereo when
she turns the truck on she has to hit this map like button i'm assuming it's this one you see
me playing with here that brings up the connect screen she also says it does not like connecting
to multiple phones so what does that mean for you owning this top display stereo it means that
if you are a singular driver in this vehicle and no one else drives it then as long as you're
to touch that button every single time to connect your phone you'll probably enjoy this stereo
otherwise it works pretty good now personally i think all the bluetooth functionality should be
rock solid on a unit with this cost well those are the two cons next let's talk about the pros
so first of all that top display stereo fits so perfectly and is so pretty it looks like it came
from the factory that way and i just am very impressed with that next it is a true plug and
play installation it's the easiest one i've ever done and lastly every time i put it into reverse
man that camera comes right on rock solid that is not the case with the ford f-250 that we have that
we use for our horse trailer that has the same alpine aftermarket deck that the land rover lr3
had in it and about half the time i put it in reverse the camera doesn't come on so i have to
revert to the little one that's on the rear view mirror and that one's really small it's very hard
to back up the truck to the trailer hitch and get that you know lined up so very impressed with that
functionality now i'd like to thank top display for sending us this stereo for free for our
independent review they were very patient giving us several months to work back and forth with them
on the backup camera is there a fix to that and then also giving us time just to see what it's
like as a daily driver very impressive very nice work with great customer service now i'm going to
leave a link in the description below so click the more button it opens up the description of this
video to this exact stereo also i'll have their home page website and we're going to working on
a promo code so look for that down there you can click on that and use that in the checkout but
however the link works and get a nice discount so if you found this video helpful will you please
give it a thumbs up that's really helpful to the channel believe it or not also please consider
subscribing i work really hard to put out good quality efficient content and there's a lot more
videos to come we've got a few more on aspen's f-150 getting it all updated and ready for her
the next one's going to be some suspension work with max speeding rods and then we're going to be
starting on my land rover lr3 sadly i checked top display does not have a stereo available for
the land rover but nonetheless please be looking forward to those videos until next time thank you
for watching