A New Beginning: Aspen's 2013 Ford F-150

Waffle Square
9 followers
4 Video Views·Aug 8, 2026
In this video I introduce you to the 2013 Ford 150 we bought for our daughter Aspen after her Land Rover LR3 was totaled in an accident
Camera Gear Used:
Canon EOS R6: https://amzn.to/3NfUvwk
Canon RF 15-35 2.8 L: https://amzn.to/3RWE5rI
DJI Osmo Pocket 3: https://amzn.to/45bs4aT
Godox Wireless Mic: https://amzn.to/4ha7zk5
Email: [email protected]
Views and recommendations expressed are my opinion based on hands on testing, experience, and results.
I would love to read your comments and video requests in the comments below.
AI Generated·May contain errors
Hi everybody, welcome back. If you've been following the channel you know that our LR3
series recently came to a pretty tragic end when our daughter Aspen was involved in a t-bone
accident. The vehicle was completely totaled, Aspen was injured, but she's recovering well
and we're just grateful to have her alive. Now that Land Rover wasn't just any vehicle,
we had put a lot of blood sweat and tears into it over the years and you guys had been coming
along for the ride while we refurbished it. It did exactly what it was designed to do and did a
great job of protecting its passengers. So today I'd like to introduce you to Aspen's replacement
vehicle. This is a 2013 Ford F-150, thankfully not with the troubled 5.4 liter Triton V8 engine.
This one has the 3.5 liter V6 EcoBoost which has proven to be a very dependable engine.
When we were driving it home I was amazed by that EcoTurbo boost kick right in the pants as you hit
the gas. This truck isn't going to replace the LR3 in our hearts, but we do need something to get her
up and running as soon as possible because we have school, she's taking welding classes, she also
takes time to go out with her friends and go over to her buddy's house to ride horses. First and
foremost we wanted something that was safe. The Ford F-150 has always had a very reputable safety
record. In fact stuffed in here we have electronic stability control in the winter months when she's
driving on ice and snow and we have another full curtain of airbags front and side everything. So
we're pretty confident that she's going to be rolling down the road nice and safe and Aspen
really said she wanted something as big and as capable safety wise as the Land Rover was. Now no
truck at this stage of its life with 220,000 miles on it is going to be perfect so there are plenty
of things that we get to work on together. Here's a quick montage of all of its issues. Well if you
can see all these bubbles in here that's actually beads of water. There's a crack right here and look
at this down here might be hard to see but that's actually a puddle of water pooling in the bottom
so we definitely have to get this guy replaced. Now maybe back when this tonneau cover was first
installed it looked good but to install it they had to bend up these side rails and then over time
all the velcro has worn out and it's all torn right here. Aspen doesn't like it so we're going
to remove it. Now this headlamp's looking pretty good a close inspection shows a little bit where
the film is breaking away but not bad. Over here however you can see how foggy that is. This is
all worn out we're going to have to buff that and get a new clear coat on it. Well this side
view mirror has this cool little notch in it with this reflector. If we come over here
no reflector no notch so there's two different side view mirrors. The driver's side doesn't work
and the passenger side has a crack running all the way across it so we're going to replace them both.
The vents are really sharp looking except this one's missing. The dashboard and the interior
are beautiful only problem is a lot of the seats are dirty and then this one down here which is
fabric is all ripped out so we're gonna have to deal with the seats and then this emergency brake
when you release it is not springing up all the way and it leaves an alarm going off so we're
to deal with that. Yeah these back seats are just filthy they need to be scrubbed down and then
we'll take our like carpet cleaner and we'll suck all the dirty water out of them and that should
make them look a lot better. On the bottom cushions of both of the back seats the clasp here
the release lever is missing he's got one of them right here so hopefully they're the same part
number and I can order a second replacement. The two front window switches are not working
properly when you try to go up it comes up a ways hits the top and then starts coming back down so
we're thinking there's an issue with these two switches maybe they had water or a drink and
dripped down in them and they're ruined. Nonetheless he thought the same thing and
already bought the replacement part from Rock Auto which is fantastic. I was adjusting the
fade on the stereo when I first drove it and one of these two rear speakers sounds like it's blown
so we're going to investigate that and replace them. Now if you enjoyed our LR3 content I hope
you'll come along as we make some necessary repairs and some really nice upgrades to Aspen's
truck. Now don't worry if you peek right over here you'll see we're still going to have some LR3
content coming but a responsible father has to concentrate on getting Aspen's vehicle ready to
go for her before I can play with my new project. Now I hope you'll come along with us on both of
these upcoming projects let's get started. Well here we are back in one of our favorite places
underneath the hood of a vehicle so a couple things I want to do first to get Aspen up and
running. First of all we're going to do an oil change so while I'm warming up the engine since
I've never gone in and inspected everything that's going on and I don't know how clean or how dirty
it is we're going to do an engine flush with Liqui Moly. I've watched several reviews of this when I
was researching uh Porsche Cayennes and the guys that deal with those sensitive engines just swear
by doing this every so often. So we're going to start off with the best possible outcome. Now after
you put the engine flush in you want to run the engine for 10 to 15 minutes which is perfect
because it's cold right now we want to warm it up before doing the oil change anyway. All right
we're good to go there the next obvious thing that I found that we're going to have to address
is if you look at this picture here on the coolant bottle it says 50% motorcraft specialty orange
engine coolant and 50% water. Well here is a close-up that is clearly green coolant and that
was put in two years ago by a company here in Utah that did some work on this engine. They did
a lot of good work but this was a mistake. Maybe that's all they had lying around but green shouldn't
go where orange should go and if you know anything about mixing the types of cleaners and chemicals
and stuff that are in modern coolants they can actually cause the whole system to sludge up. So
we are going to flush this system out put actual flush in and drive it around to try to circulate
everything through the heater core all that and then flush that back out and replace it with the
proper orange coolant. Next thing of course I always want to when I get a new vehicle change
the air filter while I'm at it. Here is the mass airflow sensor so I will also get in here and
clean that with mass airflow cleaner. All right let's start up the engine and get that circulating.
You could just hear that little turbo. Let's take the oil cap off see if we have any blow by.
Absolutely no issue there. Good. Now as always before I bring the vehicle in I put down some
plastic here and then I'll also put the little tray to hold it down because it's a tad bit windy
today. Now as always every time I bring a vehicle in to be worked on I hook the battery up to the
trickle charger. All right next time I think I'm going to come in from the spot where you're at.
Nonetheless we are right here 15 millimeters. This shouldn't be this hard somebody must have put it
on with an impact wrench. While that's all draining out it's a perfect opportunity for us to change the
air filter. This is a Wix 49883. I really like the Wix filters so I don't think we would necessarily
have to but just so I don't break anything I'm going to take this little plug off of the intake
and just set it aside and then I tried off camera to pull this out without
removing this and it just didn't work. It seems to be a theme today. There we go. Three clips down here.
One, two, three. Then we lift it up and out. Yeah so much easier with this
unattached. There we go. We got lots of rocks in there and really dirty. I'm glad we're changing
this out. Now if your drain plug is worn out as this one you can buy another one just like this.
If you see here it's an M12 by 1.75 and it comes with a brand new gasket for ten dollars but I'm
going to go with the EZ drain valve. I love these. I have them on all my cars because you can put a little
port here that is a 90 degree elbow so that the oil is always coming down straight into your bucket
and for our Fords the equivalent to this drain plug is an EZ 107 and you can tell because it
says 12 millimeter dash 1.75. All right we're down to just a drip now so let's get a touch of that
oil and let's get it on this new gasket or o-ring whatever you want to call it. I'm gonna wipe this
area clean and there we go. Boy that's threading on nice. Then a 7.8 or a 22 millimeter will fit
in there to tighten it up. It doesn't have to be very tight of course because it's got that gasket.
So completely crazy on the F-150s with the 3.5 liter EcoBoost that are four-wheel drive
the oil filter is not accessible from inside the engine well. In fact I have it lit up so you can
see it is deep deep deep down in there right at the center of your screen that dirty white thing
is the oil filter so you can't access it from in here because of all this stuff in the way. You
can't get to it from underneath either so what you have to do is come from the driver's side
wheel well. You come down in here and you disconnect these little quick snaps right here
for this piece of trim and then if you come back in here you can just see the head of it
right there in the center of your screen. You can't see it from down here the camera is just
able to get in there deeper so you're gonna have to go in there by hand and it's they're prepared
to make such a mess that this little v-shaped deal right here in the center of your screen
is where the oil is supposed to pour out of and then that tray has to be cleaned up afterwards
crazy. Well instead of making all that mess I'm going to try to make a coffer dam out of this
plastic kitchen garbage bag and stuff it down underneath there so whatever oil drains down
into that let's give it a shot. So when choosing your oil there's something to consider about these
3.5 liter turbo boost engines. These turbocharged engines have very hot and a lot of pressure going
into them from the turbocharger and that can cause what's called pre-ignition. Basically the fumes
of an oil that's not the proper rating can cause a pre-ignition inside the cylinder. Obviously that's
very bad so you need the API so American Petroleum Institute SN plus rating on any oil that you
choose and as you can see right here on the back label Castrol GTX in the full synthetic 5w30
exceeds that API SN plus so we're going to use that and it should take six quarts. I've got a
big old funnel right here and you will get a much smoother flow if you go sideways like this
so not pour it this way where it chugga chugga chugs but sideways just like this. It's slowing
down at the bucket so let's create a little bit more pressure see if we can get more out
much better. All right let's run some flush through there was a lot of green in there
now that bucket was a two and a half gallon bucket and it was maybe three quarters full or so so
I don't think we got everything out of here there's supposed to be 16 quarts in this system so
two two gallons is like eight quarts right so but that's what the flush is for
now when you're flushing the system you could just use regular tap water
because you're going to run it through everything clean it out with the flush and then you're going
to drain the system again however we're not getting all of it out so I don't feel comfortable
leaving residual tap water in there so even with my flush I'm going to use distilled water
now it's hard to see because this expansion bottle is very dark and kind of stained
orangish or brownish it's obviously had a lot of heat to get discolored like that
it's brand new it looks more like this master cylinder here where the brake fluid goes nice
and clear kind of opaque white color I would love to replace this bottle since I'm buying this
vehicle used but in in something that amounts to a conspiracy you could convince me this expansion
bottle is also the bottom of the air cleaner so you have to buy this whole piece and it takes all
these steps to replace it it's much more expensive than your standard bottle so
I am going to however replace this cap with an OEM cap I've seen a lot of videos on YouTube
about Fords that overheat and the cap is the best place to start to try to keep that from happening
it is a wear item and I'm going to replace it thankfully this vehicle as long as we've been
driving it the last few days has not had any issues overheating but we want to maintain that
good fortune that is a good bit of grime that we got out during that flush all right after flushing
it out and draining it again it's time for the proper coolant so this is not 50 50 this is
actually concentrate I buy concentrate it's like maybe a dollar more or two dollars more something
like that and then I put distilled water in to mix it because distilled water is a lot cheaper
than two gallons of 50 50 so instead of going 50 50 now putting in a full gallon of distilled water
I know that there's still stuff in the system from when we flushed it because
only a couple gallons came out and it's a 16 quart system so anyway I'm gonna put
another like half gallon of the proper coolant in there and then top it off with the distilled
water that's just my personal preference because I've noticed in the past when I go 50 50
once it mixes with what's left in the system it looks really diluted to me and I'm constantly
topping it off with concentrate so I am going to prevent that from happening by doing it this way
yes exciting bye-bye massive crack
so all right we've got the appropriate clothes on for cleaning such dirty seats
step one we need to vacuum and get all these little particles out of there that if we get
wet are just gonna make it worse all right step two we're gonna put the upholstery cleaner on
now aspens has this cool little brush we only have one of those so I have another can I'm just
gonna use this brush to agitate it in oh nasty and there we go a lot of quick but necessary
maintenance steps to get aspen up and running with her new to her truck now in the coming videos we
are going to be doing a stereo upgrade instead of this tiny little box that you see here we're
going to have a nice big full-size almost ipad or tesla style stereo and then in addition to
the shocks that you saw me replace in the back of the truck max speeding rods got together with us
they want to be part of this build and they sent us these cool supports that we'll be installing
very soon until next time thank you for watching
