In episode 3, I install VANTRUE Pilot 2 Thermal Dash Cam on our 2007 Land Rover LR3 I am converting into a K9 Search & Rescue response vehicle for me and my search dog Maverick. VANTRUE Pilot 2 Thermal Dash Cam Product Link: https://bit.ly/4hDyl6dDiscount Code: WAFFP2Disscount: 5%off
Video Chapters: 0:00 - Intro 4:27 - Unboxing & Overview 14:00 - Installing the Rear Camera 19:55 - Installing the Front Camera 24:24 - Installing the Thermal Camera 25:35 - Installing the Main Unit 31:21 - 3D Printing the P2 Sunshade 32:27 - Conclusion
Well, I don't even know what to say after that cool opening montage.
Seriously, I'm pretty proud of that.
I sent it to a bunch of my friends.
Thankfully, I have a very cool truck
and some beautiful fall landscape behind me
to make up for any of my imperfections following
that cool action-packed montage.
Well, hi, I'm Mike.
Welcome to my Waffle Square,
where I obsess about things and you get to benefit from it.
I am excited to bring you this video.
So far, we have gone over the concept of the Land Rover Canine Search
and Rescue build.
I've introduced you to the vehicle.
In Episode 2, we installed this awesome hood-mounted solar panel
that goes right into the battery via a solar controller.
And in Episode 3,
we are installing the Vantrue Pilot 2 Thermal Dash Cam System.
Now, full disclosure,
Vantrue did send me this unit for free for my independent review.
They had some talking points that I would have covered anyway,
but otherwise, all my thoughts are my own.
Most dash cams document the accident
so that you can retrieve the video files and show who is at fault.
The Vantrue Pilot 2 makes every effort
to avoid the collision from ever happening.
With collision warnings,
with human and animal alerts,
with a front camera, an interior camera,
a rear camera, and thermal cameras.
Thermal sees what regular cameras and our eyes miss.
Now, regular cameras and our eyes see light.
Human eye sees motion very well.
Thermal cameras see heat.
And when we're out in rural roads or we're driving at night,
we are especially concerned with three things that produce heat.
Cars, people, and animals who are very unpredictable.
Now our very expensive search
and rescue drones have thermal imaging on them.
And they're selectable for black heat, white heat, and various
color patterns to aid in finding humans out in the wilderness.
The Pilot 2 sees the world in grayscale with white heat.
The grayscale looks a lot like Han Solo encased in carbonite,
but then it puts its AI layer over it
and it boxes out things in green like vehicles, people,
or animals, or even turns those boxes to red if it senses danger.
But don't be fooled. Installation
of this four channel dash cam system is very involved. I have
heavily edited this video for an overview
and installation into our Land Rover LR3s and it is
still 27 minutes. So I have broken it down into chapters.
Unboxing and overview and then each of
the cameras, followed up by the main unit.
So let's go. I'm going to try to go lightning fast
through some of the features.
I'm also going to tell you two things that you won't find anywhere
during just a casual search.
So first of all, this screen, if you measure across, as you see here,
it's about seven inches, but the actual pixelated area
that's visible is six and a quarter inches.
Then we have the one thermal camera
and if you look here you can see that inside of this rubber
sleeve there is actually a very small camera.
It also comes with a bracket so if you don't want to
mount it on the hood like we're going to you can mount it
on your front bumper or the grill area
anywhere like that but I think it looks pretty baller
and we're going to put it right where it's
intended. Unlike the rest of the cameras that are connected via USB-C,
this one has a weatherproof
connector here.
We power the unit with a simple 5-volt USB-C connection.
It comes with this one
right here that will plug into the cigarette lighter adapter
at the bottom of our climate
control area in our LR3,
but if you had some other means coming up through the dashboard,
you can certainly power it that way.
First thing I want to point out that you will not find in
any video because I've watched at least 80%
of them is this monitor here like most dash cams
has a port for an SD card. In this case it is a micro SD card.
That's pretty common. The thing
that is not common is it is not included
and that is not written on the box. It is not written in
the included manual that comes in the box.
As you see in this picture here, it just shows a red
micro SD card being placed into the unit.
In fact, you have to go to page 14 as you see here to see
that the card is not included.
And as you can see here, they recommend you use a U3 or class 10
high speed micro SD card anywhere from 8 gigs to 1 terabyte.
Now I find it funny that they don't
mention any of this stuff because Vantrue,
as you see here, actually makes their own micro SD card
for their units. So I went ahead and ordered one of those,
but you should know ahead of time
to order that and have it on hand
so you can start recording your footage. Next, let's talk about the
cameras so you have the front facing dash cam attached
to that you have this one here that is
for the cabin of the vehicle
so you can adjust that if you're an uber driver or something to
see what's going on in the cabin of your vehicle
but one thing that is cool if you see here if this
camera is facing towards the windshield you
do have the capability of rotating this camera
up towards the headliner if you want your privacy
and you don't want your dash cam recording you
while you're driving. Now let's talk about each of the camera lenses.
So this one is the most
intriguing. This is the front-facing camera.
It has a very wide lens like all of them do,
158 degrees, and it's also an f-stop of 1.8,
so it's going to let in a lot of light. Now the only
place you'll see this is if you look
on the box here you'll see circular polarizing filter optional
that's the only mention that there is anywhere
but this has threads so i knew that means you can get
a circular polarizing filter
which if you see in these pictures here can be very important
for glare coming off of the windshield
or if you're trying to dial in the clearest image of
license plates, since this device can record license plates.
But what size is it? Where do
you get it? You can't find that on their website.
It's not in the manual. I had to check the Google.
Google told me this is a 40 millimeter circular polarizing lens.
So I went on to Amazon. As you
can see here, Vantrue actually makes it,
and it's compatible with most of their front-facing cameras,
so I ordered that. So those are the two things
you would never know unless you watch this video,
because I couldn't find any mention of them anywhere.
Now the camera that faces inside the cab
is also very wide. It's 160 degrees, and it is f2.
The rear-facing camera, so the one going out
the rear window is 165 degrees and again f 1.8
so lots of light coming in now calling your attention
to another feature of this front facing camera
this 3M adhesive right here is what adheres to
the windshield and if you look here this pivot
is for going down and up but also this is a ball
joint and it will pivot like kind of left
and right so you have a ton of flexibility to try
to center this camera and get the best possible view going down
the road that is pretty cool i
don't i've never seen that before we already talked about
the power cord but in addition to
that one you do get three other cables one of which
is for the thermal camera and the other two
are for the front and rear cameras.
Now interestingly the power and thermal inputs are
straight USB-C but this one here that has the front
and cabin and rear cameras all coming into
this one port has a specific way that it needs to go in.
As you can see here it's notched out so it
can only go one way. Last thing to note on the back
of the monitor there is this auxiliary port
right here that has a spot for a radio jack to go
into now what's interesting about that is if your
Land Rover LR3 is equipped behind the center console
with that auxiliary input you could
actually connect that to this monitor
and this has Android and CarPlay on it you can link all
that to your phone and make this your CarPlay adapter
and not even have to change out the
stereo if that interests you.
Well, if you don't want to use the included cigarette lighter adapter
to power your unit, Vantrue makes a hardwire kit.
Let's go through it. It's pretty cool.
So first of all, this large bit in the box here
is converting 12-volt power through here
into the usable 5-volt USB-C.
But how do you get that power?
Well, they also include a couple bags of fuse box jumpers.
So basically you pull the fuse out of a circuit
and you stick it into this slot and it converts
it into two. It's going through that original fuse circuit,
but it also gives you these power
cords here that you would plug into your device.
You ground it somewhere, but you get your positive
circuit from here. Now, if you're like me,
you might've asked yourself, why do I have to run
this long cable through the headliner all the way to the front
and rear camera here.
What if I just power it?
Will it communicate with the system via Bluetooth or something?
And the answer is no it won't.
You physically have to come over
to this camera and plug into
the socket that says rear and at that point you can see it working
and it splits the screen now
four ways and we have
this as the rear camera this as the
front camera and this is the camera
facing you but the good news is if you just want
to look at the front camera here or the
rear camera here. You can just hit that one
and you exit out of that split screen and you go all
in. So you could look here and see the backing camera
or any of the other cameras. So if we're
going to put the camera back here at the top of the rear window,
we're going to need to run the
wires through one of these two that goes
from the door itself down back into the vehicle. And you
can access those wire shrouds by pulling down
this piece of trim here which reveals these yellow
plugs that we can get with these pliers and pop this piece off.
So I'm going to gently do that
and now you can see all this wiring coming
from the back door through this channel right here and
up through there so that's a good spot
this piece right here comes off in very much the same way
but the question becomes can we get a usb cable
from here all the way up to the front
well so far i've removed this panel
so that i can reveal all this stuff here and i've got our usbc
cord taped up right there
to a little zip tie i'm using some
kitchen soap to get this all slippery
i'm going to try to pass it through this tube here
down across to here where i've fished through
from all
the way over there
at the rear door yes
all right
let's get our
bearings
as you can
see in this
picture we
are at the
back door
on the
passenger side now instead of trying to fish through this area
because we have a door we can
simply pull back on the rubber
and that exposes this slot right
here between the headliner and
the door and that's a great spot to take
our cables now you're only going to have one i have
two because i am also running the cable
for the backup camera for a later video at the same time
but as you can see we can just tuck
that right up there easy okay now we've moved up to the
front passenger door
and if you look at this picture here if you pull forward on the B
pillar trim you overcome this yellow clip
and that allows you to hand through the cabling and then
we get to the same thing here where we have
the rubber door trim that we pull down we tuck in the
cords and that brings us up here
to the A-pillar now let's come over here and look at the A-pillar
and discuss some things.
So if you pull on this little piece of plastic that says airbag that
exposes a screw inside that you can take out
and that loosens your A-pillar. Well we're not running
this cable down the A-pillar
but we do want to loosen that so we can get in here and run it
around towards the rear view mirror
because this cable is going to plug in to the front
facing and interior facing camera
and then that camera has a cable that is going to run over here
and go down the A-pillar and over to the monitor
and I'm fortunate enough to have a dash mat
and I can just lift that up
and I'm going to be able to tuck all my cables underneath the dash mat
so it's good to have this down
because we're going to be running that cable and also we have quite a
bit more of this cable than we're going to need
so why not zip tie it and tuck it behind the air
bag so we don't interfere with that but we still have
a good spot to hide the remainder of this
cabling. Now while we're in here
with the A-pillar trim off there's no better time than now to get
some spray adhesive
and fix this cloth
that comes off
of every model
I've ever owned.
Well while we
still have the A-pillar trim open here having run
the rear camera cable all the way up. Let's prep
and install the forward facing camera
so we can run both its cable down to the monitor and this
cable over to this spot right here.
Now using isopropyl alcohol I'm going to wipe down all the
goo that collects on the inside of the windshield
that is mostly from the dashboard off gassing
it's also from the vents blowing air our breath all that kind of stuff
so we're going to clean
all that off. Now since that is 91% alcohol it dries almost immediately
and then Vantrue
gives us this beautiful lens cleaning cloth
that has their own logo embossed in it so I'm just
to use that to wipe any other residue off like
a final prep and then they give us this little sheet
there's actually two of them we only need one it's
a little clear plastic piece that we are going to
install onto the windshield and then peel off the cover
and install the camera onto that and that
way if we ever want to remove this camera we're
not leaving this 3M self-adhesive residue all
over the glass makes it a lot easier to clean up
so it couldn't be any easier there's uh step one
peel off this side step two once you get it on peel off this side
so let's follow their lead
here there it comes
in case there's any bubbles like these
two i'm just gonna seat it with this
microfiber towel they included all right now why did i pick
this location because when i'm in the
driver's seat over here and i'm looking into the mirror
this camera will be completely invisible
so it's not going to obstruct my view being over
by the dashboard it's going to be up and out of
the way and since i don't care to have
this camera functioning i am not concerned if it's blocked by
the rear view mirror if you are an Uber driver
or something and you're wanting that then you're
going to have to adjust your placement
so that you can view what's going on now with that static
sheet on we can now peel off the 3M adhesive
and it does not come off very easily which bodes well
for how good the adhesive is but makes it kind
of a pain to work with you saw we experienced the same
thing last week
when working with the 3M tape
on the hood mounted solar panel
and there we go easy
now it's just going to be a matter of putting
in the two cords all right this is the cable that is
going to head over to the monitor
and this is the cable coming in from the rear camera now i'll
probably come back with a very small black zip tie
and clean this up but for now working these
up into the headliner and i'm using the angled side
of the included tool to help me pry back
the headliner a tiny bit
and move the cable in there and that's
working good so for the thermal
camera and we find a way to run the cabling right
in there where you see this huge harness there's
also the hood release somewhere in there i bet
we can get the wire through so with aspen's help
i took my electrician's fish and i came through
this opening here all the way to the back and went
through that wiring harness
and with the use of this plastic pry tool and her smaller hands she
was able to guide this fish around that wiring harness
and up here so i can attach the cable
well thanks to aspen
and all her muscles we
pulled it through great
job baby girl so with the
dashboard all cleaned off
and ready to go i'm looking at where i want my monitor and there's
two things that interest me number one i want
to make sure it's not so high that it's obstructing
my view of the road and from where i sit right here
in the driver's seat this top is only as
high as the windshield wipers
which are what two-thirds of the way up the hood so we're good
with height right there.
Then also it's where on the dashboard I want it.
So I would love to have
it closer to me, say right here,
but I'm thinking about putting it in line with the thermal camera.
That's about right here.
And I think that will translate into my mind when I look at it as the
easiest to pick up where everything is if I need to react with it.
You know, say as I'm driving
down the road. So this right here looks about the best to me.
I also want this
base to be in line with the dashboard
and not turned one way or the other
because I want it straight like
this so I can take this measurement from here
back to the stem right here
and that way I can cut the dashboard mat with this
little slit right here and put it back over it
and be pretty well lined up and run the cables
up through that same slit and keep everything
pretty well tucked away so i like that right
there
two and
a half
by six
well
there's
the
thermal
camera
nice to
know it's
working
look
it's got a jitter that's interesting it looks
like a heartbeat let's go to home let's add more
go to multiple so there's
the camera behind our rear view mirror
that's obviously shooting to
the sky let's adjust
that one down it's off to
one side so let's go over
or huh something like
that looks pretty good all right let's go
to the next one that is our interior camera
see that hello but don't care for that one very much
so let's turn that up out of the way
but it's working, here is our rear camera
so you can see that's really high, we're gonna need to
bring that one down, but what a beautiful image
that's looking through tint and that's if you
want to see all four at once and from that menu there you can pick
while we're rolling to look at
this front screen and then obviously
when it gets dark, thermal, well I've got
a little tool for my
phone that allows it to get the same image as the camera's getting
so we are going to crawl back
there and adjust this camera, you tell me
when it's right, hey that looks pretty good huh, a little bit
bit of sky right in front, let's go take a look, okay
that's me, what, five feet away, here's me
being a burglar looking through
the window, yeah I don't know how you'd want any more than that
we're gonna go ahead and call that good
and there we go, I told you it was involved, but there's one
more thing left to install
and that is this awesome 3D
printed sunscreen available on Van
True's website. So if you go to the support section,
I'll leave a link for it below,
you will find this file for the P2's screen.
Let's go install it. So I 3D printed this
out of PETG. It's going to stand up a lot better than
your standard PLA to the ultraviolet light
of the sun.
So it just slides on like this and let's hear
the click S. Now that is great. So
think so, I can see this little green dot that is going
to cause me to just adjust it up just a bit
like that, perfect, now I really love
that hardwire kit maybe someday I'll think about uh installing
the hardwire kit only to that second battery that we have
but for now I'm going to leave it to the
cigarette lighter adapter for two reasons number one convenience
but number two on situations where
we go out and we're looking for runaways there
are certain times where we have planned to park
and just look for the runaway's heat signature running across
the field almost like a perimeter
and when I'm sitting like that I don't want
to be using the battery power in the vehicle
so I have this power station
and as you can see right here it has a 12 volt cigarette lighter
adapter that I can turn on and I can run
this little five volt output unit for a long time
on this guy with a totally blacked out vehicle.
That's going to be cool. Now before we wrap things
up there are a couple must mention features.
First of all the heads up display as they call it.
So you can select
for that and on the screen it will pop up three circles.
One is your speed,
The second is any G-force that you are feeling
and the third is the altitude you're at and for
us that can be pretty cool if we are heading up
into the mountains to do a rescue or do some
training and we're getting into the 8,000 foot range
or above we know we're going to need to
pace ourselves.
Now second the main unit screen by default is set to full screen.
Now in some of the
earlier things where I was testing it you could see
on one side the Android Auto and the CarPlay
icons and things. I just wanted to make sure you knew
that it goes full screen very easy and that
is my preferred way of looking at it.
Lastly getting video footage off of the main unit screen.
I have done reviews in the past where getting
your video footage was terrible. I'm happy to report
that with the Vantrue Pilot 2 it
is really easy there's multiple ways in fact first and easiest
for me is just simply removing the micro SD card
from the back i went right to my computer and as
you see in this screenshot it comes right up
with very usable file folders and they are MP4 videos
they play very easily it even breaks them into the four videos
so the front the interior the rear
and the thermal and all of them have your audio
from inside I think off of the main unit put onto
them so even the rear camera sounds like you're right there talking
if you're trying to make a
point like oh this guy's following me
or oh check that out all of that is recorded in pretty good
audio quality now there is a lot more
that I would like to get to with actually using it how
does it look? How are the alerts?
I want to show you how to adjust the vehicle, pedestrian, or animal
alerts for sensitivity and the sound of the alert tone, all that.
But we've already gone well over
30 minutes for this video and the average viewer
of my videos only lasts for five minutes. So most
of you are gone. In fact, I can prove it.
Leave a comment right now if you made it to this far.
And if you did, I'll bet you're not on TikTok rotting
your attention span. Now, if you found
video helpful, will you please give it a thumbs up?
That is really helpful to the channel. Also,
please consider subscribing.
We're just getting started on this series. I have a previous series
on the Land Rovers that's got a lot
of great information on how to fix them up and get them
up and running well. Also, I do some footage on our other vehicles.
Now, I'd like to thank
VanTrue for sending me this unit
with no preconceived agreements other than I took a
list of some of the things they wanted mentioned.
I would have mentioned them anyway, so that was
super reasonable. Most importantly, they were very patient.
I got sick about halfway through
making this video. You could probably tell the way
my voice sounded in some of those installations.
They were cool all the way through.
And they had no request ahead of time to have editing input,
like we want to see it and approve it before you put it up on YouTube.
I refuse all of those types
of reviews and I get several. So they did a great job.
They are thoroughly confident in their product
and they just sent it to me.
They also sent that hard wiring kit and just let me roll with it. And
I am really happy with the product so far.
We're going to make another video on this, utilizing
the screen and getting everything out of it.
And that'll be a separate video. But our next video
is going to be Auto One sent me a bunch of interior LED bulbs.
And we are going to do
what everyone loves to do on these Land Rovers,
which is get rid of those dark, warm lights and
put some nice bright LED lights in the doors and in the headliner.
The back seat by the trunk area
has to have some work done in it for sure.
I'm looking forward to that one so that when we
respond at night, we can see.
Now, until next time, thank you for watching.