Hi, I'm Mike. Welcome to my Waffle Square, where I obsess about things and you get to benefit from it.
So in episode 14 of our ongoing series where we are refurbishing this 2006 Land Rover LR3 with
the V8 petrol engine, we are going to be removing both front seats. We're going to go from this
ratty, torn up leather, to this complete teardown, to this. With these custom leather seat covers
made specifically for the LR3 from Lseat.com. So let's get started.
Brought to you by Waffle Square.
Now, I'm not paid nor sponsored by Lseat.com. I paid for these seat covers with my own money.
I chose Lseat because the website was really easy to navigate. You can go by make, model,
year, and see the selection of what they have available. Once you get to the specific vehicle
year, you have a choice of leather color, of stitching color. You can also have a custom
logo embroidered onto the seats. Go check out their website. I think it's pretty neat.
Make sure you leave yourself plenty of time for delivery because they make these on demand and
it's going to take a couple weeks for them to get to you. All right, let's start the process.
Now we're going to be moving both seats back and forth a bunch to get all of the bolts out.
So until we disconnect the battery, I want to keep the charge level healthy. So I've got it set up to
my trickle charger and you can see just from me doing the driver's seat, the charge level has
already dropped down. Now, before we get started, I'm not a mechanic. I just dress like one on
YouTube. So you're just coming along for the ride to see how I'm doing it. And I'm going to start
right here at the front of the seat. There are three plastic panels that we want to take off.
So a little removal tool like this one that's spring loaded is super helpful. The first one
we're going to start with is the one nearest the threshold here and this one needs to be pulled off
this way, so towards the center of the seat. And it easily breaks away right here,
but there are two metal clips right on this side. So we're going to get our tool
right down in there and just pop those out. See that? Nice. That one has one, the other one has
two. And that exposes our first T50 bolt. So I'm going to get in here with my little electric
ratchet and that is one of five. Now, since we're right here and the seat is forward a bit,
we're going to take off this cover piece here. It also has the same kind of metal clips.
I think it has four of them. There's two over here and two over here. So let's get behind it
with our tool and start prying this off. There we go. And there we go.
One, two, three, four of these little metal clips.
Now, this big plug right here is what we're going to be removing later on in the seat removal
process. But for right now, while we're here, let's pull out all these little retaining clips
that are attaching it to the metal frame. That came out easy. If you get underneath them,
they don't break as often. There we go. Good. All right. Now we're looking at the other side
of the seat. So here is the center console and here's this little cover plate. And that one also
pops out towards the center of the seat. So once again, I'm going to get my tool
on the inside area. You can hear that pop out. It's got two.
There we go. Same two metal clips.
There's two. Well, for now, that's everything up front. So there's a couple things I want to do.
I want to move the seat all the way forward. I want to take out the recline so the seat's
up like this. It's going to make it easier to get it out of this door.
And while we're sitting right here, I also want to remove the seatbelt. So
these buttons don't work unless the key's in the ignition. So let's put our key in
and we'll change it to the first click only. Let's come forward, recline up. Good. Now we can turn
off that annoying sound. We're ready to take off the seatbelt and then go into the back. So come
on over here and let me show you this one. All right, let's get our bearings. We are at the
passenger side and here's the front of the seat. Moving back to where the seatbelt is,
is this cover plate. All you have to do is pull it up and it comes right off.
And that exposes right there our T50 bolt and also this wire that is the seatbelt alarm
for the passenger. So let's disconnect that first. So this plug is held on to the frame of the seat
with a little retainer clip so we can get right in here with the tool. We can pop that out.
And that gives us more access to the plug so we can see how to remove it. So to get that out,
you can take a flathead screwdriver. You go in this slot and you can feel you push down
on the little retaining piece and it'll slide out. Now those two are separated. When we get
into better lighting, I'll pop this guy back onto that little spot where it was retaining.
But we're right here, ready to take out T50 for the seatbelt. So if you take off the cover
and you can't get to the seatbelt, you come over here, lower the seat,
and it exposes itself to you. How great is that? All right, now we're on to the back of the seat.
And this also has two plates that need to be removed. However, both of these are going to
go up instead of in towards the center of the seat. First plate is this one right here. So let's
just get under it. Now there is a metal plate right beneath this one. So if you get too aggressive of
an angle like this and you try to get under it, you're really just on the metal plate. So make
sure when you get here with your pry tool that you're just getting under the plastic and not
the metal plate. There we go. There. Good. There we go. So there's two there and two up top. We also
have a T50 right here and then one up and over the rail behind here. This one's really helpful to
have a small extension. All right, let's compare all six bolts that we've taken out. A quick look
at the front two and the rear three T50 bolts shows they are exactly the same length. So no
worry about mixing those up. The only one that's different is the one holding on the seat belt.
All right, back to the front. We want to move the seat back and expose about an inch of the rail
because there's going to be some more Torx bit bolts underneath the seat. And you want the frame
moved about right there so you can get to them when it comes time to remove the seat to change
out the leather. So let's reach in here once again. Over on back. So when you see the frame here for
the seat about out about an inch or two, I think that's going to be just about right. All right,
the last thing to remove to get these seats out are the plugs that supply power to the seat. The
motors going back and forth, the heater, but they also supply power to the airbags. There's one on
each outside of the seats. So we can't just disconnect those plugs because it could cause a
fault and it's also dangerous. It could potentially set off the airbag. So we're going to disconnect
the battery first. So we're going to move forward here and disconnect the battery in just a minute.
But I wanted to tell you, since this channel is all about obsessing over things, I did separate
all the plastic trim pieces and mark them passenger and driver so that we can wash them
and keep them together. So there's no confusion when it comes time to put them back on. All right,
let's move up to the battery. These two pieces of trim are identical, so you don't have to worry
about them. I love that light. I reviewed it in this video. All right, here we are. 13 millimeter
to loosen up the lead here. I'm going to set this aside because I'm going to use my awesome grip mat
to help us keep it from making inadvertent contact once it's off. There we go. All right,
let's do 15 minutes for safety to let all the possible power
bleed out of those airbag solenoids or whatever could be in there.
Keeping it straight. We kept it straight. It's all there, ain't it? Everything marked,
everything membered. Yeah, you kept it real good. You ain't been slack at all.
So while we're waiting to remove the chairs, let's open up this replacement pack.
From L seats and see what the quality looks like. So this is the inside and it is nicely padded.
That leather looks really nice. That clip is really well stitched onto there. So are these
going all the way around the perimeter of the front. Here's a little pull through tabs that
give the seat that taut kind of look to it. Another one's over here and here. Really pretty
stitching. Here are the headrests. Yeah, that is pretty stitching. I don't see any pre-cutting
for the armrests. You must get it to where it's supposed to be and then make your own incision.
Here's one of the backrests. Again, really nice looking stitching and look at this. It's got the
side airbag tag on it. This is something I was curious about, but you're still going to have
the storage space behind the backrest and it's got some sort of kind of plastic or vinyl
piece to keep this from sagging. Very nice. Here's the armrests. Now you could go wild
and get this stitching a different color than the leather. They're totally customizable on
their website. The seats appear to be indistinguishable from each other. Everything
looks the same. I don't think you'll have to worry about which one is left or right.
And the same for the two headrests. Well, after all that, I think more enough time has passed.
Let's get the plug out. So if you look right in the center here, you'll see that is a seven
millimeter little bolt and it's captive, meaning it's going to stay with the plug itself. Let's
get it all the way unscrewed from the back like that. Then that comes out and reveals all these
little sets of wiring that are going all throughout the seat. And that's all there is
as far as wiring. All right. So those of you who might be new to the channel, this is Aspen,
my daughter, whose vehicle this is going to be. It's why we're refurbishing it. Let's give it to
her. So we've been talking about what we're going to find underneath these seats when we pull them
up because we're thinking it's going to be pretty gross. So we're taking bets. Leave a comment down
in the description. Which side do you think is going to be the dirtiest driver or passenger?
How much money are we going to find? How much glitter is going to be in there? And how many
french fries? All right. Leave your comments below, but let's find out. You want to hop in the back?
Yeah. Okay. Perfect. You ready for this? Let's see what happens.
Bottle caps. French fry receipts. A Whopper Junior coupon. Put that in your front pocket.
What else do you see?
You know, a five dollar Whopper coupon, a hair thingy. I don't know what that is. That's for
somebody's contact lenses. All right. We got a quarter. 50 cents. This project's going to pay
for itself. Oh, you know what that is? That goes on the armrest. Oh, that's a good find.
I thought we're going to have to order that. Oh, there's a penny stuck to a french fry.
There's two pennies stuck together. That's nasty. Now we got a lot of cleanup to do.
I think that was the contact lens. That's nasty. That's disgusting.
All right. Here goes number two. Why does this one seem heavier?
Free makeup. We got to get up and over this big old amplifier. It's coming.
Oh, we hit the pentapalooza. That's for sure.
I knew we'd find a french fry. Woo. Cherry chapstick. Put that right on your lips.
Here's the cigarette lighter guy. He can go right back in there. I wonder how long ago he dropped
down there. No, but it helps to keep anything from falling in there. So I got 50 cents over here.
There's plenty of french fries over here. This is a bandaid. This is a pearl. So which one do
you think is the dirtier? This one has more french fries. Yeah. This one has more money.
Oh, here's a bandaid off of someone's finger. Okay. Well, all right. Guess it's time to clean
all this up. Thanks. Final count was $1.71 and a really nice fake fingernail. But since my audience
is 99% men, I'll just go ahead and throw that away. All right, let's get our bearings. So this
is the shoulder area of the seat. Here's the headrest. And this is the grip that goes from
the headrest down to that shoulder area. We want to take that off. So the first thing we want to do,
if you see me push back on the leather and the foam, is we want to get this trim piece out of
the way. And that simply just gets pulled downward like this. There. And we can slide it out.
And then when we flip it over, we'll be able to back out that Torx bit. Let's do the same on the
other side. So now I have the seat laying on its side. So once again, here's the shoulder. Here's
the headrest. On the back of the seat is the T27 bit. And now we can grab onto the handle and we
want to pull it straight away from the shoulder and the headrest at the same time. And it just
comes right out. Easy. Now let's do the other side. And now we can lift the headrest up and
there is a little catch right here. If we need it, we can push on that to release it.
Speaking of easy, let's remove the armrest. So this little trim piece just comes straight out.
This T27 bit feels a little bit loose in here, but we can still get it. Now the trick to getting
this armrest off is rotating the armrest up to a 45 degree angle. And that allows you to pull it off
because there's this pin that corresponds with that opening. Now this is from an old
seat cover that used to be on the vehicle. Now I tried like crazy, but could not get
this pin out. It is like a spring-loaded pin inside there. So I think when the time comes,
we're just going to have to cut an opening and stretch over this washer. Straight down from the
armrest bracket is this trim piece that covers up the backrest. We're going to want to take this off.
Now there's two Phillips screws, one back here and unfortunately one right behind the seat belt.
So we have to temporarily remove this seat belt bracket in order to get to that screw.
And now we can see that screw. The other one's on the other side, right about here.
Pretty easy to find. Once the two screws are removed, it's got a little retaining clip right
here so we need to push up. See that? And this is where the leather has attached here so you can
see why we needed to get in there. Let's remember when we're putting this bolt back in that they
use Loctite since it was for the seat belt. We're going to do the same. I'm going to hold it in
place for now. All right, let's remove the leather off the headrest. There's simply a little clip
here that you pull back and it exposes both the front and the back. And now we can just
cut through, being careful not to mar up the foam. There we go. It's in good shape.
I can't wait to redo this ratty armrest. So this is the dial that raises or lowers the position
for comfort of the armrest. And it looks like we're just going to stretch the leather eventually
around that because that rod doesn't come out at all. So we're going to want to punch a hole
in the leather and then just stretch it around here and I'll show you that
so that you have confidence in my decision. But for now let's just start cutting everything off.
Looks like they used some sort of glue right around here. See that? A piece of the armrest
is broken off there. Yeah, right there. Oh well. Okay, so I tried removing some screws and things
and nothing easily got this rod off. But if you look here, this leather is very stretchy. I can
just stretch it right around the dial. So we'll do the same thing. I've got some leather making
tools. We can punch the biggest hole that I have in it so that it doesn't tear and we'll work
through it. All right, we've got the chair tipped over on its back exposing the bottom of the seat
here. And this is the crossbar of concern. This is why you have to move the seat up enough that you
can get at these two T40 bolts. So let's start with them. And while we're here, there's a couple
wire retaining clips. We just want to pull those wires out. All right, there's two more way back
here. So I'm going to get my bit lined up. So those four bolts are the only mechanical
connections with the seat. There are a couple plugs that we're going to have to disconnect.
One from that big loom and another one over here. Let me reposition the camera and show you.
So as we peer down between the seat and the frame, you can see this covered wire right there. We need
to pry back that plastic loom off of the seat pan. And straight across from that other clip,
there is this plug we want to squeeze and remove. Coming up from this big hole in the seat pan is
this wire that is for the heater. And this goes right in to this big electric plug receptacle.
And all the way back over here is a black plug. And we need to remove that one. You have to go
underneath here and get a flat tip screwdriver in and remove that one. So let's do that now.
And there we go. See it coming down and out. Nice. And with all those disconnections made,
the seat pan comes right out. So let's pull the leather off the seat. First thing we want to do
is remove these plastic retainer clips. And then all the way around the front and side perimeter
are these little clips that clip into the metal box. So we want to remove each of those.
And what I found is just a flathead screwdriver gets them the best. Do that. And with that,
we can start to cut. Be really careful on this side because the heating element is right here.
See all this is the heating element. So right in here and here, here and here are these rails.
And they are held in to an internal rail in the foam with little clips. And these clips are called
hog rings. Now there's two ways you can go about this. You can try to pry them open like this
to get the old seat cover out, then put the new seat cover in and try to pry them
with pliers back. But instead I'm going to use these hog ring pliers. I'm going to cut out the
old ones and I'm going to install new ones with this tool. And it's going to go a lot quicker
if we're not trying to individually pry open every one of these. And that way this bar comes right
out. Now once I get all of these off, I'll go in there and I will remove each little piece.
All right, all those are clipped off. And now there's a plastic piece right here that we can
just peel off. And there we go. All right, let's take off the leather around the backrest. Now up
here at the top, we already have these two big squares where those handles went into. So we can
just start cutting right there. Same thing on the front here. We have rows of the hog rings. So
since I'm going to be cutting those, I'm going to put safety glasses on. Sometimes they fly out at
you. Now there's a strap that goes around the side opposite from the armrest. And the new seat covers
have the strap itself, but they don't have this metal clip here that pull the two together. So
I'm going to make sure I retain those. All right, so the seat is now standing up. We're looking at
the back. And let's take off the back portion. As you see right here, there is a plastic clip that
is up here on a metal bar. See that? So we just need to press that off. There we go. Now there
are two strings right here, one here and one here. And those are holding the front, the sides that go
right along your shoulders, holding those in. So we don't want to cut those. We want to pull them off.
And there's a little hook up here in this metal. So we want to pull that up and unhook it
just like that. And then we feed those through from the front. Now let's come down here. And
there's two plastic kind of French cleat clips down here from the front and the rear. We just
want to undo those. There we go. Now if we lift this up, we'll see two more plastic retainer clips
that's holding the back on at these plastic pieces. And we have those plastic pieces on the
new seat. So let's just pop these off. And that's them right there. And that allows us to take the
back off. Now those ropes that we disconnected up here go around the front and they come back
here. And those are also hooked in. So we just want to pull that little cord like a rip cord
and remove that. Now I'm just going to cut off the plastic piece that's going under the seat
right there. And out comes the front. Great time to clean up. Now here were those two
ropes with the clips that hold the sides of the backrest on. You do not get these
with the replacement seat covers. So we want to hold on to these and keep them.
So I spent some time yesterday covering the passenger side seat from top to bottom. And I
think it turned out fantastic. So let's start right now with the driver's side seat. I want
to start with the headrest. And I have the seat down on the ground and the headrest on the back
rest because it's going to give me the ability to use my weight. Whereas if it was on a table surface
you would just have the two posts in the way. I just think it would be a lot more difficult.
Now some of them it's going to be easier to start with them inside out. However the headrest
and the armrest are not that way. You just have to deal with it being right side out.
All right it is a struggle to get this headrest on. But I've noticed that if you come over here
on the corners that are bulging and physically push them in as you pull down
that is helpful. Yesterday when I did the headrest for the passenger seat I let the
headrest sit in the sun for a while and it didn't make a huge difference. But I do feel like it was
a little easier time than I'm having right now. Nonetheless we're getting it. All right now we can
take it off and bring it over to the table to fold in these clips. I've noticed that if you
fold and clasp these two halves together right away the tension in the leather is still too
strong and they tend to pop open within a short period of time. All right now it's time to put
the two cords in. Remember the big long sharp hook is the one that goes up top. So we're gonna
insert from this direction and go up here. And if you want to pre-stretch this little piece here
with a dowel or something that'll probably be helpful. It's a little bit tight in some spots.
So I just took this wooden dowel and did that and there will come a time where it'll be helpful to
have one of these electrical cable fishing tools to push it through and you'll see that here in a
moment. Start down at the bottom get it started. Now you can just sit here and kind of try to
caterpillar it through but I found that it is easier to push it along with the snake. You just
have to be careful that the little sharp tip if it gets into this fabric that you back it out a
little bit and try again. There we go. That is not easy. All right one more to go over here.
Utilizing the old armrest cover I was able to locate approximately where the hole should be
placed but as you can see in this picture it looked like it was a bit too far back and was
actually getting into this sharp spot. So I'm actually going to put the hole a little further
up to try to get it away from that edge right there. I marked the hole. I've got my largest hole
punch for leather and and I beat it a few times with a block of wood inside and got most of the
hole done. I'm just going to trim the last little bit. Now you could easily just cut an incision but
this is going to be visible unlike the cuts we're going to do for the armrest where it meets the
unlike the cuts that we'll do for the headrest where the headrest is going to go down and
actually cover those holes. This one's going to be visible every time you raise it up so
I wanted to dress it up a bit with a circular hole punch. Now once you get it started a bit
it starts to get really tight right here so what I found was if you can roll back the leather
like this so it's not doubling up on itself. Yeah I found that that helped out. Now if you get
way off track like this maybe we should pull back a bit twist it. Yeah that's better. And now we're
at the point where the hole we made is lined up with the dial so I'm just going to pull it back.
Good. I'm going to gently pry this up and over because remember this white plastic
was broken on this one when we pulled it off so I don't want to add to that after doing a repair.
Go.
All right I'm going to put a few drops of super glue right around here and with the glue in place
I'm just going to hold it down with some clamps while we work on this backrest and seat. So let's
do the seat now. I've got it sat on top positioned front to back but we're not going to just fold it
around because the first thing we need to do is peel back and put in all of our hog rings. We've
got two sets of hog rings going across and two sets going down the chair. So we'll start with
the center two. This one here and this one and then we'll finish up with the outside ones. I
right where you see these two lines in fact are where the bars the center of the bars down there
that we're going to put the hog rings around. So this isn't necessary but I found it was a lot easier
to mark right there with the sharpie so I know right where I put the holes through this fabric
because it's hard to see otherwise. Now we're going to spread apart the jaws insert the hog
ring just like that put it through the seat first then then turn it this way so it's
almost parallel with this opening push down hook around the inner bar and squeeze
and that makes a really good connection preload the second one
and fold around now we're going to do the same exact thing right here there we go now
we'll do the same thing on each side except these have one two three four spots where we need to put
the hog rigs and all done now let's start to wrap it around the top now let's start doing all these
clips I found that a flathead screwdriver with your hand out of the way so you don't stab yourself
works really well now I just want to smooth out these wrinkles most of that's going to happen
when we clip this into place but I want to help it along now this is one long continuous clip
push that right into place now this is the hole where we're going to put these little panel clips
retainer clips in so let's not just put it in loose let's kind of stretch this a bit and use
it to our advantage right okay there let's push through and there we go
all right to start the backrest I recommend you put it back down at ground level now take the
backrest and partially invert it create a pocket in there to this first
bit and that way you can put it right across the top you can line up these lines
and bring it down to there feeling here to make sure everything looks good and now we can
tuck those two ropes through the shoulder area and then from the back we'll pull the strings out
so the point goes into the hole and then the little clip grabs it now that both of those are
in we can pull this around this clip right here and this metal railing loops around there's an
edge right here that we're going to click it into and attach our hog rings now that that's done we
can pull this down a little bit more and do this strap so this was initially made and stitched
right through this eyelet opening but all we have to do is slide it through that way we're going to
push it through here and connect the other side right here so here we go
all right next we want to use these little panel clips through this hole and into this
plastic so I'm just going to set it behind here pull it taut that's an 11 30 seconds bit
let's bring it down to the next section and now we'll do the same thing with these straps
there we go so here's the bottom of the back and we need to fold that down and pull
this one from the front up and clip those two together like that and I found that it's
helpful to get this one going by pulling it with a screwdriver or something to get it close
and then bringing this one around once you get those it's time to stretch this around
and put it on this post so what we're going to do is figure that's about the halfway mark
well all the remaining parts of the reassembly process to include actually bolting down the seat
have all been demonstrated to you in reverse order so I'm sure you can figure it out and
believe me I'm aware this video is getting long tomorrow is Father's Day and I don't want to be
working on any of this so I wanted to end this video right now and get it uploaded now this is
not an easy project it's a lot of work as you can see but I hope that I've answered any questions
you might have of what you need what it's going to take how much time to set aside before you
embark on this endeavor so if you found this video helpful will you please give it a thumbs up it
really helps the channel also please consider subscribing I'm working really hard to put out
good quality content there's a lot more videos to come on refurbishing our LR3 and I hope you
stay tuned for those I'm going to leave a link to the website for lc.com and then all the various
other items and tools that I use that I think will be helpful in the description below now full
disclosure those will be Amazon affiliate links so if you click on them and end up making a purchase
it won't cost you a thing but I do get a small reward at the end of the month it helps to justify
all the time it takes setting up multiple angle shots to entertain you now before we go I wanted
to give a special shout out to Samuel one of our viewers who watched the video where I was fixing
the tailgate and noticed that on the bumper one of these little plastic pieces was missing he
reached out to me and said that he had some and offered to send them to me and he did Samuel thank
you very much they're gonna go right on and replace the ones that are missing and if they
look nicer maybe I'll replace all of them since you gave me so many thank you very much and thank
you to all of you that have been leaving comments below I read every comment and I respond to all
the ones that are courteous so until next time thank you for watching