872. Glazing a Side-handled Teapot with Hsin-Chuen Lin 林新春 上釉示範

Hsinchuen Lin
205 followers
203 Video Views·Sep 10, 2025
To see or buy my finished work and pottery tools, please visit my Online shops:
https://sawfish-endive-kgks.squarespace.com/shop
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
To watch more of my YouTube videos, please visit my channel:
http://www.youtube.com/@hsinchuen
To learn more information, please visit my Website:
www.mypots.net
Instagram: @hsinchuenlin
Facebook page: Hsin-Chuen Lin Ceramics
Pinterest: @hsinchuen6518
I brought some water to the strainer before I poured in the glaze.
Usually I prefer to set it on glaze on the inside, so it will take less glaze when the
sponge is soaking some water.
The good thing for using the bubble syringe is that you can pour in just enough glaze,
so you don't need to pour it out.
The glaze stays in there until it gets dry.
So now I use the masking tape to tape it here, and I will dip the whole thing in the red
color, and then after that, peel it off, and then dip this portion in the green glaze.
Dip the glaze inside of the syringe.
So using this, just enough glaze so that I don't need to pour it out.
And now remove the masking tape.
Glaze the lid.
There are a few drips of the glaze.
Just use a sponge to tap it up.
Now for the green glaze, I will pour in inside of the side handle first.
Fold it up, and then dip it.
After glaze before fire, I will show you the result after fire.
So here is the result of the side handle teapot I showed you.
Using different glazes for the handle portion.
Use the tape.
Now, this is after fire.
I used the copper red glaze and multiple glazes to do my decoration.
And the lid is fitting very tightly, tight fit without moving.
Alright, so that's the result I promised to show you.
Thanks for watching, and see you in my next video.
Bye.
