873. Glazing a Sodium Texture Lidded Jar with Hsin-Chuen Lin 林新春 上釉示範

Hsinchuen Lin
205 followers
159 Video Views·Sep 19, 2025
To see or buy my finished work and pottery tools, please visit my Online shops:
https://sawfish-endive-kgks.squarespace.com/shop
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
To watch more of my YouTube videos, please visit my channel:
http://www.youtube.com/@hsinchuen
To learn more information, please visit my Website:
www.mypots.net
Instagram: @hsinchuenlin
Facebook page: Hsin-Chuen Lin Ceramics
Pinterest: @hsinchuen6518
And when I dump it out, I kind of rotate it this way so it will go all the way around.
So what I'm going to do is try to brush the black glaze. Very thin layer of black glaze
over and try to get it into the groove inside the texture and then wipe it out. So the glaze
is pretty thin and I want the glaze to get in that cap easily so I will use some water to brush the
surface first. I'm going to wipe it up anyway so I don't want the surface, the texture product
pour some water so it's also watered down.
Okay so after that I will wipe it off. Make sure I have down pressure and a little bit of friction
so I will put the gripper underneath to create a little bit more friction.
Make sure it doesn't come up from the center and create friction. And then also I need to
have a down pressure so I will have my plastic glass disc on top of it, right in the center.
Now I'm dropping the spinner so I have a down pressure and then when I wipe up,
so when you are using the sponge, the higher point, you are going to wipe up so you reveal the
white color because my clay pot is white. So the black and white will show that contrast.
the deeper texture. I'll leave it over there again.
That is how I get the texture, the contrast texture. Now this part here I have a cherry
mountain. I will choose a place that will show that contrast, a better place to do that.
I could use the wax resist to coat it here so when I dip it in the glaze I'm going over to the texture.
For the lid I'm going to use the under glaze from Duncan. I mix two colors together,
the red and orange. These two I mix them together.
And again this area is a very small area so I'm just using the bubble syringe to
glaze in this part. All right so dipping the lid. So the wax resist is resistant very good.
I have a very clean line there. The bottom.
I'll do a better job when I'm cleaning that part. Now I'm going to dip the shoulder part.
I'll do a better job when the glaze dries and clean up so the line looks sharper,
looks more straight. This is how I glaze a different portion of my texture lid jar.
All right so here is the result of the sodium silicate lid jar. I showed you how to use different
glaze on different portion of it and wipe it off. So the black and white show the contrast of the
texture nicely. The manifold glaze is using the wax resist to protect it and dip it. So here is
the result. All right so thanks for watching and see you in my next video.
