850. Trimming/Carving an Angle Mug & Attaching Easy Handle with Hsin-Chuen Lin 林新春 馬克杯修坯紋飾接手把示範

Hsinchuen Lin
205 followers
143 Video Views·Apr 16, 2025
To see or buy my finished work and pottery tools, please visit my Online shops:
https://sawfish-endive-kgks.squarespace.com/shop
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
To watch more of my YouTube videos, please visit my channel:
http://www.youtube.com/@hsinchuen
To learn more information, please visit my Website:
www.mypots.net
Instagram: @hsinchuenlin
Facebook page: Hsin-Chuen Lin Ceramics
Pinterest: @hsinchuen6518
all right i promise to show you the
finish and you can use on my bed like
this one it's non porous so you can use
just water to hold it in
position this is my translucent bed
water and a little bit of a pressure and
it will stick onto the
bed this shade looks like a seven okay
seven it's one of my
tangai loop style tool
[Music]
[Music]
[Music]
[Music]
my mark slightly curve inward curve so
to be able to get that the straight edge
cannot go into the inward curve so you
have to find some tool that has slighted
curve like this one i have slighted
curve here i can use that curve part to
take care of
it this is my pear shape some people
call it teardrop i call it pear shape by
two and this one I call it D shape looks
like a
D D D D D D D D D D D D D D D D D D D D
D D D D D D D D D D D D D D D D D D D D
D and it's slightly curved so you can
take care of that this curve easily and
slightly curve here so I can take care
of the slight curve here easily
right you see that the curve is taking
care of this curve easily um I still
have I have a slight curve here too so
I'm going to use that curve to take care
of that too
[Music]
[Music]
all right so this is the D shape taking
care of this inward curve much
easier and then for that in the corner
here if you want to get the nice
90° this is my number two also tungsten
car tool
so that 90° is taking care of the inner
part
[Music]
[Music]
[Music]
[Music]
[Music]
okay
so this is the angle
mug and I will use my scido tool to do a
little bit of a carving here get some
texture
here all right i promise you to use my
muscular tool to do some symbol simple
carving just some straight lines here
that's my
decoration yeah this is my new prototype
of uh Scofido cabin out of constant
carbide material
[Music]
[Music]
[Music]
all
[Music]
right so pretty quick i did my straight
line scido cabin and this tool is so
sharp so the cut out is very nice and
clean without any messed up on the
edge i'm ready to add the
handle right now bring back my handle
got it sitting there for a couple
hours so it firm up a little bit further
i'm ready to attach
it first I will use my fingernail to
just tap on the end to open it up wider
so later I can use the um the clay that
come here use that to smooth it
out instead of adding a coil it it will
be a lot easier so this part here looks
just like a coil already so you don't
need to add coil to reinforce
it score my part here the body part
usually I put about a quarter inch down
below is the position I attach my
handle brush some slip
here brush slip on my
handle so put it on the inner part if
your rim is still soft mine is quite
firm but I usually have a
fingers behind it to support it while
I'm
pushing the handle to
attach remember I usually tell my
student when you attaching two part
together SSP score slip pressure
SSP score slip
pressure so you remember that and uh if
you do that and your handle is similar
brightness to the body and I can
guarantee that
99.9% you will have successful
attachment right
so go slip and pressure and now just let
it hang
naturally you could adjust the
curve because this it's not very
slippery so you can adjust it until you
find the right
balance right so this is good and make
sure that the handle is
straight and here I'm adding slip on the
bottom
portion before I compress firmer I like
to see if that's the size that I wanted
to and slightly squeeze it push it and
get a needle to just cut
off the part on the
bottom
okay and then um put your hand behind if
your clay is still soft mine is quite
firm so you don't have to do that and
just use my thumb or you can put some
water
here so little bit slippery
here compressed
thumb okay and this part here since I'm
just I just attached it so it's still
still soft and uh I will let it sit
maybe like upside down for maybe 10 to
15 minutes let the uh the attached part
even out if this part here is drier than
the handle it will draw some water later
you'll draw some water so it'll even out
and after that just use a needle to
smooth out the joint but now you don't
need to do it just let it
sit okay okay I will bring back and then
show you that how I finish clean up that
the portion right so yeah this part is
firming up so I'm bring it back and I
use my needle tool
to just blend it
together or you can use this tool or to
smooth it out
all right so this is the finished piece
conclude my demonstration on making the
encoish mug and the trim and then do a
little bit decoration and adding the
handle all right thanks for watching and
see you in my next video
[Music]
