One of the ways you can support our channel, is by checking out the items we promote on Amazon. If you purchase any of these items, or even follow the link, it pays us a commission. Even if you purchase other products after following the link it pays us a commission.
At the moment, we'd like to show you this beautiful Weller soldering iron that we use every day in our videos. The Weller adjustable temperature irons work better than cheaper ones because they attempt to keep the tip at a certain temperature, and are a higher wattage. This helps you get nice solder joints and makes it easy to do repairs.
These links below are to this product in various areas of the world, thanks for watching!
Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
AI Generated·May contain errors
Video Summary
AI Generated
Joe from Joe's Classic Video Games demonstrates the restoration of a 1978 Bally Lost World pinball machine. He details his business strategy of flipping affordable solid-state machines and provides a comprehensive guide on diagnosing boot failures, cleaning electronic components, and performing preventative maintenance to ensure long-term reliability and profitability.
Ladies and gentlemen, this is Joe's Classic Video Games back with another cool pinball
repair video for you this evening. This time we have Bally's Lost World. Not too shabby.
I think this one's from 1978, late 70s. Anyway, I picked this baby up yesterday on my way home
about 4.30, 5 o'clock. It is now the next day, about 8 o'clock, and I'm going to see how far
I can get on this thing. These are our favorite ones to get. So we kind of have three tiers of
pinballs that we work on. There's a bunch of different levels of pinballs, but we kind of
stick with three. We consider it three. But you can get pinballs for $10,000, $15,000 if you can
believe that, but we don't deal in nothing like that. We like to get these more affordable ones
like this because it's just a lot easier for us to get it at a good price where we can fix it and
resell it. And it's much easier to sell a pinball machine like this than it is to sell a $10,000,
$15,000 one. So now I don't want to have that much money tied up in one machine. I just think
that's crazy. People have, you know, 10, 20 machines in their basement and they're all worth
$6,000, $7,000 a piece. That is just insane to me. And I'm in the business. That is just insane.
So we don't mess with those. This is what we consider an entry-level solid state machine.
So these two here are EM machines. You can usually get these pretty reasonable.
So this is kind of where they start. This is a starting point. You want a cheaper pinball machine,
you're probably going to have to get a EM machine. And then a step up from the EM machines
is the solid state machines, which have the digital displays. A few more little things going
on. Not too much. You really, all you get is a little bit more. You get some, you get digital
displays and some beep boops instead of the chimes. But they're pretty similar. You're just
getting digital displays. So you start at the EMs and then you go to the early solid states.
And then after this, you would go to like a DMD dot matrix display. And once you get to those,
they start getting kind of pricey. So, and then they've got, you know, they got the brand new
ones, like I say, for, they start, I think at about $7,000 and they go up from there for a
brand new machine. We don't mess with none of those. We stick to our three that we like. The
EMs, the solid states, and some of the DMDs. We don't even get very many DMDs just because
so many people are collecting them. It's hard for us to get them at a good price where we can fix
them and resell them and make it worth our while. So we don't even mess with them, but it's much
easier to sell a machine like this on the distributors that sell the brand new machines.
They don't really make that much money. I'm going to make more money off this machine than a
distributor is going to make off a brand new machine. Cause I got this at such a good price.
I can fix it and sell it for a good price. But, you know, I'm limited to how many of these I can
find at a good deal. You know, they can just keep churning those new ones out. But anyway, I know
what's wrong with this machine. It's broke. So as you probably know, my brother Ronnie mainly does
the pinballs. I kind of stick with the arcade games, but I got him working on some EM repairs
that people dropped off. I've got a couple of people looking for a nice affordable pinball
like this. So I'm going to try to get a good jump on this baby. So I can flip it.
We usually don't do that, but I've got like three people looking for a good
pinball like this, good, affordable, solid state pinball. So if I can get this thing fixed, I don't
think I'm going to have any trouble selling it. So it wasn't working at the guy's house.
I had to disassemble it to get it out of his house. And then I put it back together this morning.
I plugged it in. I have not turned it on yet. So it probably won't boot up, but we'll do it
on camera to see, uh, see if it does. This guy had this machine in his house for 16 years. He said
he bought this from a local company that I know I've done business with before. And, uh, he didn't
tell me how long it's been broke, but anyway, you can tell him he made up a little instruction
sheet here. Pinball machine plug in. We did that. Turn on underneath the machine. Let machine go
through cycle before beginning play. Punch number of players to play. All right. We got it plugged
in. Let's turn it on. If there's always a pit, there's always an on off switch underneath the
pinball right into here, lit up and it's still broke. We pretty much knew that, but I wanted to
film it for you guys. Just so you could see that it was broke. The cabinet's in nice shape. I didn't
really go over the cabinet very much earlier. The cabinet's in nice shape. It's been in the house for a long time.
Here's the back glass. The back glass is pretty much perfect. It's got a little wear through here.
It looks like somebody might've did a little touch up. I saw, I saw it. They thought they fooled me,
but I saw it. And then there's a little bit of lifting right here. But other than that,
it's pretty dang nice. All right. So I'm going to take the back glass out and we'll,
we'll see what we can figure it out. All right. So here's what the inside looks like.
We've got our MPU board here. Still has the battery on it, but it doesn't look like it's
done too much damage. And we've got our solenoid board. We've got our lamp board
and we've got our sound board. I got everything hooked up and there's a little led right here
and it's flushed. I can't remember how many times it's either six or seven. It's supposed to flash
and it'll tell you what's wrong with it based on how many flashes you get. You do it a little
quick flash and then it's supposed to give you a flash sequence after that. So we'll, we'll look
and see how many flashes we're getting. LEDs right here. We should get a little flicker and like six
or seven flashes after that. One, two. So we're not getting our third flash. Did you see the little
flicker? And then we got one flash, two flash, nothing. I'm going to do it again. The flicker
is pretty quick. You got to be watching. Pay attention now. Bam. One, two. All right. We're
getting two flashes, not getting a third. Don't know what that means. I'm going to have to go
look it up on the computer. Like I say, Ronnie does this most of the time. I'm trying to get a jump
start here. So let's go see what we need for the third flash. All right. Are we going to trust AI?
All right. The initial flicker we got the first flash confirms that the program ROM
U2 and U6 checked are good. We got the first flash. Second flash confirms the scratchpad RAM U7
and the 6810 chip is working properly. We got the second flash. Third flash confirms the RAM
ROM checks or PIA initialization are complete. We did not get the third flash. Didn't get the third
flash or the fourth or the fifth or the sixth. So we're stuck on the third. So first thing I'm
going to do is I'm going to clean the chips then. I'm going to clean the RAM and ROM chips on the
MPU and we'll try it again. All right. I cleaned all the chips. I basically just take them out
and I clean the legs with a little file gently and I put it back in. And this was one of them.
I actually had to swap this one because the legs were pretty weak on it. I could tell. So I just
went ahead and swapped it. But that's how they get. See how black the legs look. So you got to
make sure all that's shiny again and it's going to make connection. That's the leg that broke on
that one. That's why I had to swap it. And also the 5101 socket didn't look all that great when
I took it out. I sprayed some contact cleaner in there just for now but we're going to have to
take this board out anyway to take the battery off and clean up this acid damage. I say acid
damage then I always get corrected. It's alkaline. It's alkaline. You can say whatever you want to
okay. You can call it whatever you want. But anyway let's try it now. One, two, three, four, five,
six, seven. You know what that means. We're gonna make that money today.
Uh-huh. It booted. It suited and booted. Add some credits on this baby.
Oh that's pretty neat. They had that rigged up over there.
Now they got that switch.
All right we got credits. Oh yeah the ball's up there. I untilted it. When I moved it the ball
fell up there. Take the lock down bar out. I don't have the legs on it yet either. I've got the legs
on the back of my truck but I want to paint them before I uh put it on the machine. I always paint
the legs usually unless they're in really clean but most of the time I paint them. Right flipper.
Left flipper. This one's five ball looks like. I guess they felt sorry for me.
That one didn't register. Game over. All right so I know what you're thinking. I'm not just gonna
sell it now. That's not what we do but I'm glad I got it booted and working. So now I can pretty
much just shotgun the whole thing. I need to reflow all the displays. See how that one's not even on
but it was flickering earlier. Usually that's bad solder down below. So what I usually do is I just
go ahead and take all five displays out and I reflow the solder. I'll show you that later.
We still got a whole day's worth of work on this baby and it's still early in the morning.
I got to take this out. The solenoid board. I got to reflow all the connectors. I got to change this
big cap. I got to check all these resist uh transistors. Reflow all the headers like I said.
I take the sound board out. Change a few of those capacitors. Reflow that header. I got to take the
power supply out. Reflow that header. I'm probably gonna have to repin the MPU board over here too
but I'm gonna have to take the MPU board out. Reflow all the headers. I'm gonna have to repin
the power going into the MPU just for good measure. I'm gonna have to clean up all this
acid damage. Alkaline damage. Whatever you want to call it and I got to put a remote battery on it.
So what we usually do is we put two jumper wires and then we put a remote holder down here on the
so if it leaks it'll leak down here but it usually doesn't and got to reflow all the
displays and we still got to do the entire play field. We got to take it all apart. Clean it.
Wax it. Put all the bulbs in. Clean all the switches. So it's going to take me all day to
do all that even though I've already got a working machine but anyway that's pretty cool though.
We got it to work so now we can just shotgun it is what I call it. Just change all the known
problem areas. I mean if you were selling it on Craigslist or something you could probably just
reflow that one display and call it a day but you know I give people a warranty with them so
you know I got to make sure it's good. I don't want no callbacks okay. No callbacks. The only
call I want is that for them to call me back and say oh thank you I love that pinball machine Joe
you got anything else I can buy from you? Could I give you some more money Joe? If you get something
else you call me and I'll come down and buy it. That's the kind of calls I want but anyway I think
I'm going to start on the play field. I don't know if I'm going to film much of that because you guys
have seen me do this. Have you been watching the playlist? My brother Ronnie has made a playlist
of all the machines we've worked on and we've had a bunch of these lost worlds
so we've probably had 10 of these things so if you check our channel and go to the playlist there's
probably a ton of videos on a lost world if you've got one of these and they made a bunch of them
because we've had a lot of them but anyway enough chatting I got to get to work. I'm going to take
all this off clean it wax it change all the bulbs put it all back put all the rubbers on it you guys
know what I'm doing okay okay I got the play field all cleaned up it turned out pretty good I changed
all the bulbs all the rubbers cleaned it waxed it sorry to the people that you missed out on your
wax music okay I had a headache I'll make it up to you next time okay but I got it all cleaned up
you can see that I waxed it by the machine see the light but cleaned up cleaned up pretty good
I mean it's got some wear around the little kick outs but this thing is almost 50 years old
I think it looks pretty dang good so now we're going to move our attention to the displays
this one has started to warm up a little bit this one has started acting up and this one is totally
out now this one's still good and that one's still good so that's like what I was saying earlier you
can't really just reflow one you should probably just take them all out and reflow them so that's
what we're going to do and see if that gets us back going again you see that ring around that uh
that pin there at the bottom of the screen and there's a ring around the second one
and there's rings developing around the third and the fourth and the fifth and the sixth one
so that's what we do we just add some solder to all of those pins all along the bottom
it's usually the ones at the end are always the worst it seems like but go ahead and reflow
all of them on all of the displays and that should get us going again all right I got my
solenoid board capped and reflowed I got my displays working now I'm going to turn my
attention to the mpu I cut the battery off earlier it does have a little bit of corrosion but this is
actually not very not very bad compared to most I think it got to this 5101 socket though so I'm
going to take this out and change that socket I didn't like how that looked earlier I'm gonna
clean it all up I basically just sand it down with sandpaper get it all clean and then we put some
vinegar on it and then uh we dry it all off with some water and rubbing alcohol so
that's just how we do it everybody's got other ways to do it but we'll clean all this up I want
to change this socket also clean this up it didn't really get too far up here so we may have to mess
with this connector and we probably will have to repin this connector in the cabinet but we'll get
all that done and we'll be back here's a look at that socket that's why we're changing it see how
those pins are all green all that was going up inside the socket so I gotta get all that off
there clean it up and replace it there's the other end of the socket I think that stopped there though
you can tell by the yeah the top pins are pretty clean still I think I only made it to the bottom
so I should be able to leave all these other sockets all right so it's the next morning
you never get all you want to get done in a day you know I got most of it done yesterday
but I had to let that board dry a little bit after I worked on it as you can see I got all
the displays working good I know they're flickering on the video but they're in person they're perfect
okay so put my solenoid board back in change that cap like I was telling you about refloat it
I changed the socket for the 5101 I cleaned all this up this actually looks worse than it is I
put vinegar and everything on it so it's not going to uh creep anymore the damage actually
stopped at this socket and all these sockets were still perfectly fine I did change that
connector there as you can see and everything seems to work fine I am going to change a few
of these caps on the soundboard and reflow that I didn't have to mess with the power supply you
may be wondering about that these are usually kind of crusty looking they get burn up but
whoever worked on this before me had already swapped those pins and the connectors so that
saved me some time I am going to go through and check all the lights of course I put all new
bulbs and everything on the top but uh I'm gonna put it in test and get all the lights working
make sure all the ones underneath the play field are good and then I'm gonna pass it off to Ronnie
and he's gonna play a game and you know check everything out make sure I didn't miss anything
there could be a switch or something somewhere that needs adjusting because I didn't really
mess with those but anyway he'll be back with you when we get it all cleaned up and he'll
kind of give it a a one server make sure everything looks good
all righty he'll be back in a little bit for that okay we're going to attempt to set the world record
on this I think the world record is uh it says right there two thousand two thousand points so
apparently no one has beat that yet let's see what she'll do
sounds like the ball fell or something yeah nice strong flippers
and nice strong pop bumpers love it right down the middle though okay so what you just heard was
the knocker because we have put it on the poor man's free play now some of y'all may not know
about this way back in the day back in antiquity back in the olden years let's say 2010 something
like that around that time um maybe a little before well definitely before that but up to about
2010 on a lot of these games like valley games if you had the original board set in it with the
original roms in it um you couldn't put it on free play so you know you can set it up where it
takes a quarter but a lot of people around that time get kind of tired of you know having to put
a quarter in it so they came up with this little idea to make it actually kind of on a pseudo
free play so what you do is you put a bunch of credits on it so this one has 20 on it right now
um and then you set the replay level at 10,000 points and so as soon as you play the game and
you hit a couple things you're going to get 10,000 points and you're going to win a free game
but theoretically it will just basically be on free play because you win a free game every game
so we've got it set up like that old school style
i missed again uh-huh just like joey was saying there may be there may be a little problem
was because i won three free games because i beat the world record of 2000 points that was on it
so since i'm the highest score of all time i get three free games so now we're up to 24 credits i
maybe i got four free i don't know whatever um so let's try it again i noticed something not
working you people you always tell me whenever something's not working so you probably noticed
like 10 things that aren't working so i was thinking that the left kicker wasn't scoring
but it is scoring so maybe you just had to hit it pretty good you gotta bang it a good one
that didn't work did you see that didn't we hit that uh
didn't we hit that ball pretty good and we didn't get nothing
it is scoring points
let's see about the the captive ball and we need to rip the spinner
okay it worked that time all right so i guess it's just you know
you gotta bang it a good one look at that i have once again beat the world record twice in a row
i'm gonna get a shirt made like like the that guy in the grims fairy tales he got a shirt made that
said seven in one blow because he had killed seven flies with one swing and then he walked
around with a shirt on that said seven in one blow and people thought that he had killed seven
men with one punch and so they they left him alone and thought he was a you know bad mama jama
yep two world records on the same game i think that's how that works we haven't hit the spinner
yet we got to rip a really gnarly shot through the spinner one yet another free
game i've just got it going on with this free games there we go
love it
that's so cool you know it's gonna happen i'm going to set yet another free uh uh
world record we're starting to tune it up now
i could do like a death slam and save it maybe but it'd probably tilt it
everybody always says i don't tilt enough okay
ah didn't work i lost my ball because all you people always telling me to shake the machine
oh you don't move it enough okay we have found an issue that switch is a little touchy
oh pretty smooth i always like this game i always thought this was a really good game
ah look at that three world records in a row 87 610 and i know some of y'all have probably
never scored that but that's why you watch my channel to watch me you know just
crack those high scores all right let's try it one more time if i lose it's because i beat myself
just kissed it
i did not get the world's highest score that time so i came in about
third place but i was already third place so it knocked me down in the fourth place so i now have
the four highest world scores i believe so there you go folks i hope you enjoyed it um everything
looks pretty good to me that one switch was a little iffy maybe there's something in there
where it didn't quite land dead on the switch i don't know we'll have to play it a little more
and make sure everything's right we need to listen to the sound a little bit more too
um it changed some of the sound was changing a little bit so i don't know if that's because
we had scored different things or if it was because one of the little sound control lines
was intermittently connecting so it could be something like that but it's a very minor thing
so i think we're good but we'll play it for a little while let the customers play it see what
happens and i hope you enjoyed the video so that's pretty good we got one fixed in one well it's one
video but it was two days in two days we got one going oh we put a um battery on the uh mpu a
coin cell battery so that it wouldn't leak of course i mean yeah so that it wouldn't leak and
um we uh we didn't have to mess with the power supply the solenoid he rebuilt uh the lamp board
had already been done i don't think anything's been done to the soundboard though and the uh
the displays were all reflowed so everything everything looks nice it was already in pretty
good shape in my opinion so the cool game i love the old back glass just that 70s look and this
one's in basically very nice shape there was a little bit of damage to the bottom of it that
he touched up a little bit well not touched up but sealed so it won't get any worse uh but it's
about as good as they get for an original one looks very nice this awesome art screams 1978
doesn't it all right so that's bally's lost world now on our channel i have recently been making
tons of playlists i'm talking 203 playlists that's not an exaggeration there are 203 playlists on our
channel and so i'm going to add this one to several of them so if you're interested in
playlists we've got some that uh have a ton of videos in it some that just have a few so
this one for instance will go in a playlist called arcade games and pinball machines we
have repaired that's pretty much all of our games that one's in there that one's in there
that one's in there that one's in there all of these are in there okay and then there's another
one called classic pinball machines we have repaired because maybe you don't want to see
all of them you just want to see the pinball machines this video will be in there there's
another playlist now called uh 70s uh play pinball machines we have repaired 1970s pinball
machines we've repaired it'll be in there there's one called bally pinball machines that we have
repaired it'll be in there there's one there's one called 1970s solid state pinball machines
we have repaired it will be in there and we have believe it or not uh a playlist just for
bally lost world pinball machines because we have done several of them over the years so
you can watch our playlist and see if the sound is quite right is that how it's supposed to sound
when it hits the pop bumpers and there's a little extra something going on every once in a while
is that how it is uh it's not quite is that well maybe i don't know you can watch our playlist and
tell right so i'll put the playlist up here at the end of the video now if you if you are
interested um in that kind of thing if you go to our channel and up at the top it'll say playlist
it'll say like about community playlists videos blah blah so if you click on playlists it will
show all of the different playlists and we've got a ton of them we got one just for miss pac-man
machines um the one that's got bally pinball machines in it probably has hundreds of videos
in it and these are all videos that we made ourselves that we made here in our shop doing
repairs and uh playing them a little bit we're not the world's best at playing except on this one
i just set the world record three times um uh so we're not the best at playing them but we do have
a lot of little repair tips and things like that so if you enjoy the playlist
make sure to check that out but we will see you on the next video we hope you enjoyed it