Old School Craig Radio Stuck on The CHANNEL FROM HELL And I Can't Fix It!

Amateur Repair Time
257 followers
5 Video Views·Feb 15, 2025
We're trying to keep some of the vintage electronics out of the landfill. Many times when something stops working, it can be repaired if someone will simply take the time to attempt to repair it. This channel documents our amateur attempts at repairing vintage electronics we think are cool.
We don't typically restore anything, we're just trying to get them working again. We've found that most of this stuff was well built and with a little help will start doing what it was intended to do.
Radio Repair
Phonograph Repair
Clock Repair
Projector Repair
ladies and gentlemen this is Joe's
classic video games back with another
cool radio repair video for you this
evening now normally on our Channel we
do arcade game pinball machine or
jukebox repair videos um but lately on
the weekend I've been doing these
amateur repair Time videos I'm here in
my office I've got a whole bunch of
stuff that I collect old clocks and old
radios and this is actually a friend of
ours brought this to me and wanted to
know if I could check it out and see if
I could get it to work he said something
about he can only get one channel on it
or
something um and it doesn't know if the
record player works so he wants me to
check it all out so I figured why not
we'll make a video he's a viewer he
watches our videos so he'll be watching
this I'm sure this is a
Craig uh stereo I would call it so let's
see what we got
here
on and
off
volume balance no that's not volume
that's volume tone balance
volume
tuning and then it has Provisions here
for phonograph AM FM
MPX and
tape MPX now I just said this is
amateure repair time I have no clue what
MPX is is that like a is that FM stereo
it's like another name for FM stereo
maybe that would be my guess but I don't
know
MPX H I don't know I would estimate this
system is probably from the late 70s if
I was just going to
guess um but I think what I'll do is it
has speakers as well we'll go through it
piece by piece so here's what I'll do
let me put the record player to the side
for now and uh we'll leave one speaker
over here and we'll get a better look at
this uh receiver here and start
there so here's one of the
speakers the other one actually has a
Craig logo on it well I guess this one
does in the
middle um and it just plugs in of
course I stand by my my late 70s
evaluation here this looks pretty cool
to me only thing is it's that pressed
wood
stuff but that's all right other than
that this is my type of
stuff so this pressed wood stuff you
know it just ain't quite as nice as the
wood stuff
but it is what it is I think there was a
time in the 70s at some point where the
pressed wood
stuff for a while was considered better
than the the wood stuff now I mean now
we all know that it's not but I think
for a while there they were trying to
act like oh this is higher quality
stuff okay maybe not on a Craig though
okay Craig
1506 code
one AC 120 volt 60 hertz 25 watts 25 wat
that would tell me this was never meant
to be like a high-end set you know
they're
probably
um you know the higher-end ones were
probably 100 Watts or more but my buddy
that this is his he doesn't really want
you know a highend set he just wants one
that plays well and works well and he
liked this one so we're going to see if
we can get it to work or if it already
works or what the deal is for location
of nearest authorized service station
call Western Union by number and ask for
operator
25
huh design certified for compliance with
FCC rules part
15 part 16 Craig
Corporation Los Angeles California
manufactured by Sano in Japan that's
pretty cool Sano I love their stuff well
in the arcade games Sano made the
monitors for the Donkey Kong machines so
the Nintendo arcade games had Sano
monitors and they're completely
different uh than the americanmade
monitors but they have a reputation of
of having a nice picture people kind of
like
them uh caution high voltage inside to
prevent electrical shock do not remove
screws or attempt to enter this
enclosure well guess I won't be able to
work on this
one no user serviceable parts inside
refer all servicing to qualified service
Personnel qu service
person
qualified am I
qu I mean I'm not really qualified but
I'm gonna give it a
shot like I said this is amateur repair
time not professional repair time uh
internal antenna
FM external
antenna internal
antenna external
antenna I don't understand why they did
that like that it says
FM antenna
I don't get that either I'm just saying
I don't understand why it says internal
antenna if it said external antenna FM
antenna that would make sense to
me tape right and
left we don't have the tape
deck phono right and left we've got the
phono speaker right and Left 4 ohm
speakers okay so uh L rip Tater chip
we're going to turn it back around look
at the front and we'll plug this speaker
in and then we'll fire her up and see if
what she does now my buddy has already
fired it up and this isn't really since
it's solid state I wouldn't try to bring
it up on a varc or anything I just do
that with really old um tube sets or
something so I think it'd be fine to
just plug her
in it's a good looking little set I've
got a pan of Sonic over
there that's kind of the same era I
think and I think I don't think I even
got those speakers with it I think maybe
I don't
know okay well uh we've got her plugged
in let's see here let's get the volume
down it's all the way
up
um balance left and
right tone low medium
high and we're on MPX let's put it on
FM and's see what we
get now we don't have an FM antenna on
it we've immediately got
um something going
on now I was just looking ear earlier
Donnie and I were talking
about believe it or
not a radio station and so we were
talking about the country station in
Charlotte on FM 103.7 that he listens to
all the time so I looked it up earlier
today and it's it was built in the 1940s
has a 100,000 watt transmitter in East
Charlotte I'm in East Charlotte and
there letters are
103.7 so we'll see we should be able to
get 103.7 probably without even an
antenna
no okay so we're getting the same thing
all the way across the Dow like if you
turn
it we're picking up the same thing no
matter where we
are all right okay let me see what the
MPX
is yeah so I turn it the MPX and it's
still doing the same thing which maybe
that means that's FM
stereo I've seen on
um you know stereos before where they
have AM FM and then FM stereo okay so
let's put on am am's going to have an
internal antenna I would imagine so you
may actually get better reception on am
just CU it's already got the antenna
inside of
it and we'll see if it gives us just one
channel all the way across or if we get
several channels I would
assume knowing the little teeny bit that
I know that um the am section of the
radio and the FM section have nothing to
do with each other they just share the
same amplifier and the we were getting
good gain out of the out of the radio
remember we don't even have it turned up
so I mean the the volume and the
amplifier is working fine it's just the
FM's not getting any signal the am's
completely different so it it won't have
anything to do with that FM part that
doesn't get any signal now in Charlotte
the am channel is
1110 that's huge so we're right on it
let's see let's see if it comes in it's
a 50,000 watt station right down the
road wow I don't think we're getting
anything that's
interesting
the radio is
haunted the radio is haunted the am
doesn't work and the FM doesn't work and
no matter what you uh adjust it to you
don't get anything different I'm going
to change my
opinion maybe when we turn to tuning
we're moving this but we're not actually
coupled to anything anything in
here that's actually changing the
channel it does change though whenever I
turn
it I mean you're getting the same thing
but it is doing
something so it must be turning
something in there but that's weird that
it's doing it on am and FM
H
okay I just did the call letters okay
let's uh just make
sure okay so we're all the way right and
that killed the Speaker CU it's on the
left so that's probably right and then
tone shouldn't have anything to do with
it more base
more
trouble all right so the tone seems to
be working fine the balance is working
fine the volume is working fine the
tuner isn't working at all and the
selector switch seems to be working
fine so let's open her up so on the
bottom there's actually a little plate
you can take
off presumably I guess so you could get
in and adjust the uh
if cans
so you can tune it in better but I
don't I don't think that's where our
problem's going to be unless somebody
took that plate off and started screwing
with it but I don't think they did I'm
not saying my buddy did I'm just saying
I I don't think anybody has in the past
because
uh I mean why would you do that I don't
think they did I think what's going to
happen is these caps need replaced but
we're going to open it up and look all
right so I was able to get the uh tuner
out I'm mistaken this isn't pressed wood
I don't think the speaker is either it's
I was seeing sawdust all over the place
but it was all coming from that the
record player part so this is actually
uh just thin like uh paneling or what or
what you what would you call it plywood
but it's nice pretty decent
stuff um so let's see what's going on
with
this all right well I figured
out that how what the internal versus
external antenna thing means basically
if you're using the internal
antenna you're supposed
to hook the that little metal piece on
the power
cord to where it says internal antenna
so I've done that and that's making my
FM actually get a
channel but no where no matter where you
tune
it
[Music]
it stays on that same channel I'm
wondering if the
wheel has just slipped loose or
[Music]
something that's that's so strange I've
never seen one do
that okay if you push down on
this
filters for
us all right so there's a problem with
the it's a physical problem let's see on
a so this is am let's see if I can get
different channels by just pushing down
on
this
yeah I think there's some kind of
physical problem with that how that's
counted
um which sucks cuz I hate having to take
that wire loose and it's going to come
loose just to sure as I take that off
but we kind of have to I
think okay so I taped it and then I
carefully took that off and turned the
knob underneath and it did the exact
same thing so it's not a physical thing
I thought it was but um basically
whatever position that oscillator's on
um or or I don't know if you still call
that the tuning cap or not but whatever
positions that's on it does not
change and it's stuck on a horrible news
channel oh the news is driving me
crazy I have to turn it off okay so uh I
looked online no schematics at
all um what's kind of throwing me for a
loop is I don't know why it would do it
on am and FM that's
strange all right so here's the back of
that you know on an older radio what
would be called The Tuning
capacitor and it's got
four uh trimmer adjustments which and
since it's on a it's ganged basically
that just that one
uh dial of course is controlling am and
FM that leads me to believe that this is
handling both am and
FM uh
so just my best guess what's going to be
the problem is we're going to have a bad
transistor right here somewhere around
it I was saying earlier I thought it'd
be bad caps but I don't think it really
can be we've got tons of caps over here
but this is going to be the amp section
you know um these are tone control
volume control and balance control so
this is your amp here so it's not going
to be anything there I mean we're
getting plenty of volume and
everything
um it could be one of these caps here
but I don't I don't think so I think if
it was one of these you might lose all
reception right or this might be the FM
area and this might be the am area or
something but since both the FM and the
am are using
this there's got to be a transistor
around here that works in conjunction
with this and and that transistor is
probably screwed
up um that's just my best guess again
amateur repair time so I'm going to see
if I can figure out what any of those
are or maybe I I look for schematics
there's no schematics this is the
antenna coming in from the FM thing that
we were talking
about so the external FM antenna
attaches here the internal attaches to
this which basically I guess makes the U
the uh
power cord and the the so-called
internal antenna right so that connects
there so FM is somewhere here but man
without schematics and not being you
know super uh experienced with these
this might be a tough one so I'm going
to see if I can um find a schematic of
something
similar and just see if I can figure out
how this area is set up
all right folks I like I said don't have
the schematics nobody has the schematics
apparently but this is a just a random
Sano from around that time this one's a
little bit more complex um but it's not
it doesn't have an IC this one's running
off of discret components like ours
is and so I'm just looking over how this
thing works this is the FM section and
um the am section is down
here there's nothing really that they
have in common these dotted lines are
the tuner or the the actual physical
control basically uh connecting all of
that together but then I started
thinking about it they do have one thing
in common they've got voltages in common
so for instance on this set a lot of it
runs on 9
volts right so there is an area of the
um power supply of course that creates 9
volts that's running everything let me
show you a separate
one this is for a Sano
fmt 200 um K which I think is probably
actually a little newer than
ours um but if you get down to the
schematics this one actually does use an
IC but it it it's a similar power so
it's a low-end set you know it's only 25
30 Watts um and it uses a Transformer
which chars does and so you can see that
the power comes the
Transformer the power runs through goes
through the Transformer and then these
little bubbles here the comic strip
strip bubbles are supposed to have
voltages listed in them but they didn't
write down what they are but you know
this one might
be I don't
know this one might be
125 or 140 or so for like a B+ this one
after it runs through this resistor
might be 110 or something and this one
might be nine that this transistor is
creating or
something um whatever right they didn't
write it down on this one but you can
see up here in the other
sections where they call it out so
they're showing you that voltage is
there that voltage is there and of
course that's how the thing runs it
needs electricity to run so of these
like whenever you're adjusting the
frequency you're really adjusting a
voltage you know so my theory is is that
the reason that it's stuck on one
channel is because no matter how you
adjust it the voltage isn't there so
it's not actually adjusting
anything um so why would it do that well
caps
again so I think that's next we're going
to have to find the capacitors that are
in the the um if I had schematics this
would be a lot easier and if I if I had
a long history of working on them you
could kind of know you know cuz it's
probably like that one says 9 volts it
may be that all of them run on 9 volts
but I don't know that you know um or it
may be that there's only two or three
basic designs that you know have
different components and things but they
all use one of three voltages in arcade
games it's kind of like that you know
all the chips run on 5 volts but you
need 12 and then some RAM chips need
neg5 so if you've worked on that before
you know oh well I got to have neg five
for this
um so it's just something that you learn
with with a long history of working on
stuff but anyway um if I had the
schematics I could check voltages at
certain places but we'll see if we can
find uh what the power supply appears to
look like on that and start swapping
capacitors there and look for burnt up
resistors because it could be that let's
say let's just use the number nine since
the other one actually called out nine
it could be that it creates 9 volts and
it everything's fine in the power supply
but then whenever it runs over to the
radio maybe right as it's going on that
area of the board there's a resistor
that's burned up and so that area of the
board is missing the 9 volts but it's
there for other parts of the board that
need it so all right I think I'm getting
somewhere nothing's fixed yet but so the
power comes
in uh
right over
here and it's this black
line right
here it runs up and plugs into the
switch okay the
switch on the other side of the switch
turns the two black lines into a red and
a black line and another red and a black
line one set of red and black lines runs
to this
Transformer this Transformer has the two
blue lines coming out of it the only
thing the two blue lines do is hook to
all these little white
wires these little white white wires all
they are are the lights for
the um display there's three little
lights in there and they're running off
AC so this is probably like a 6vt or
12vt Transformer and that's all that's
used for okay this one is Big Papa that
runs everything so this one
the output of it is blue yellow and blue
so that's your power supply for the
entire radio those go back through the
grommet and then they come up here the
yellow is the center tap so that's
ground
basically um the
blue comes in
here and then the other one comes in
here these three pins here are a
transistor of some sort I would
assume there I go again that it's some
kind of uh Bridge rectifier so on the
between the yellow and the blue you have
13 volts on both of them
AC and then once that's all done you
have
um on this 13 Vols DC or something like
that 11 volts 12 volts something and
then on this with the yellow hook to
it this is your ground
or vice versa it may be that this is the
12 and this is the
ground can all right folks so I've
recapped the radio
section over to the
amp nothing it just won't do it it will
not do
it so it just whatever you put it on it
won't change the channel and it is on
the worst possible Channel I never
listen to the crap on the radio it's
like the the BBC or it's like PBS or
something it's some government Channel
and it's the non-stop victim
Olympics it's like they're finding
people in a war zone and talking to them
about how they got killed or they're
finding somebody that got kidnapped and
the story is all about how they got
kidnapped or it's about somebody who's
starving to death it's the most horrible
crap I've ever heard this is like what
hell is going to be like if I end up
going to hell I'm going to have a radio
and it's going to be stuck on this
freaking
channel so unfortunately I don't have
the schematics so I can't tell I can't
tell what voltage it's supposed to run
on or anything um I've looked and looked
and looked and this thing it it's like
since it's not highend there's no
schematics and since it's not lowend
it's just complicated enough that I
can't figure it out I don't know enough
about um the voltages without having a a
schematic to tell me what voltage I need
to have where I can't tell what's
missing unfortunately so I think what
I'll do is put it back in the box and uh
we'll see if this record player works
that hooks up to it and maybe we'll at
least get it to play some uh some good
vinyl folks it's viewer mail time I've
had a couple
presents
um here is my
address if you would like to send me a
card or something or Joey or
Donnie
um we're not soliciting anything we
don't need anything we don't want
anything but if you want to send us
something that's fine so I have a
present here look it says Australia
post that means this one's come a long
way baby this comes from
Michael who is in
[Applause]
Australia
and there is just a single piece of
paper in this
bag so let's read his
note hello
Ron find and Clos the USB drive
containing scans of old Australian radio
TV and hobbies
magazines that's freaking
cool
I love it it's oldfashioned and new
fashioned at the same
time he wrote me a
letter to send me a bunch of old
magazines and put them on a USB stick
when we could have probably downloaded
them or something but no he wrote me a
letter and mailed them to me I love
it given your interest in old radios and
other similar things well I don't know
why you would think that I'm interested
in Old Radio I mean I don't know what
would make you think that like the one
out in the hallway that I'm I don't know
I don't know why you would think that I
have an interest in old
radios given your interest in old radios
and other similar things I thought you
might get a kick out of some of the
articles in the magazines well it sounds
like I would this sounds
exciting there is an attachment about
copyright in Australia but I think
that's only making reproductions of any
CDs containing the magazines up to you
how to how you manage that I will take
care of it anyway best wishes to all the
lions tribe and keep up the good work in
YouTube regards Michael from the land
down
under let's see if we can get this thing
off of here
Michael Michael it has made it it made
it
intact I will check these
out
let see what they are and you know I
could have just pushed it through the
paper that would have been
smarter maybe next time so we have a
little USB drive here all the way from
Australia very cool who knows how much
is on there but it's less than 16
gigabytes for
sure I will check that out Michael I
really appreciate it um you know I don't
really have any way of getting those
over here an Australian magazine of old
radios and stuff I would never have run
across so I appreciate that that's very
cool I'll check them out look look for I
may uh I may if I find something I can
use in a video or something I'll I'll
show some of those in a in a later video
and then I got another one here this
gentleman emailed me or I think he left
a message on
um uh on
YouTube and uh he bought this from
Walmart and he just had it sent so I
don't think there's a
note he sent me a note online he
mentioned
it he said Ron I'm going to send you a
radio
kit it's a good way to learn about how
radios work that's pretty
cool
eleno that's pretty
sweet so let's see what's in
it well maybe I can open it with one
hand maybe
[Applause]
possibly instructions of
course telling you how all that works I
guess
and here would be the
PCB doesn't look like there's a bunch
going on that ought to be a fairly
simple
assembly and here's a bag of
parts I see
solder maybe that's a speaker
little
IC that's
the tuning
condenser few
[Music]
caps a little resistor
card volume pot very cool well thank you
very much I appreciate that I'll see if
we can do a video where we put that
thing together and uh get it playing
some good Tunes man
there's a if you go look at any reggae
music videos all of the people in the in
the comments say good tune man like C hu
NE e good tune man I like that all right
so thank you to uh the gentleman sent me
that uh radio and thank you to Michael
for sending me
these U magazine articles I will check
them all out I really appreciate it now
back to our regular
video so I put it back together hooked
up both of the speakers and now we're
going to test this uh turntable this is
also a Craig so I don't know if this is
from the exact set
though probably I get I guess this is
made of particle boord though and that's
like nicer um and this is a lot bigger
than that so this couldn't really sit on
top of that but I guess it was it could
be meant to sit beside each
other
um plastic lid is nice and
intact it's not the kind with a hinge
it's the kind that just comes off it's a
little bit dirty
but I think that is this
actually manual stub spindle so maybe if
you put that on the top of this oh no
this probably does this come out
that may actually come out
but we'll test it with that in there
spindle
projection you may be able to remove
that or they may have it where that just
goes on the top to make it
manual h
I don't know let's see what the uh the
needle looks like you know that's kind
of the killer if the needles
all it's not going to let me focus is it
now there we
go it's in
there
H
well I've got it plugged up let's see if
we get anything
stop start
Auto well she spins
well 78
45
33 let's put it on
33
on off control looks like it's got a
little piece broke
off maybe there's a little arm that was
supposed to be
there let's see if she'll do
anything looks right maybe a little slow
though I don't know let's try
45 looks about right let's try 78
oh
yeah I think we might be all
right um here's my record I'm going to
test with all right this this Rec this
radio is
possessed
so doesn't this look like a good
churchgoing woman here I thought when I
found this I got a whole stack of
Records in the other room that I bought
that I haven't listened to um I thought
this was like a church album so I
grabbed it but I don't think it is I
think she's just a a Heavenly looking
woman right Roberta
Sherwood with Orchestra directed by Jack
PES I have never heard of this woman and
I have listened to a lot of
music so I'm going to guess that this
isn't
copyrighted she says she's got to write
the
sing but it looks like none of the songs
are religious so I I kind of wanted
religious song so we can see if we can
exercise this radio that's my last ditch
effort if I play some some good old
gospel through here it might like Drive
the demon out I don't know you know
usually I have the power to heal your
pinball machine but I I don't know that
I can heal a
radio
so but look it has Georgia on My Mind on
it you think she can sing Georgia on My
Mind
if it's probably not copyrighted so
let's see if we can get it to
play all right I've got it clamped up I
haven't used one of these in years when
I was a kid I had I had
one um it's set on 12 I believe which
this is I think how you
set where the arm sets down so it's a 12
in we're telling it's a 12 in so the arm
tries to sit
down
anti-skate I don't know enough about
that this I
believe was a way to lift the
arm I think and then I think if you turn
it to Auto it should drop it let's see
if it'll
work
oh oh I messed up when I did this
oh I don't have the radio
on Pho here we
go you know that needle didn't look
great oh wait a minute we're still stuck
on the run
in is that say
78 is this the type that's
reversible heck
yeah what's that
say
LP let's try this one more
time
is the anti-skate thing screwing me
up that wasn't good was
all right I'm just going to lightly push
down on
it
I think we got a problem with our
needle well so far it's been a
bust
let me look and see if I can do anything
with the needle or if it's just
done well there's your problem the
needles broke
off
um the end of it is broke
off so it's not not going to play with
the in broke
off let me see if I've got another one
around here if there's something similar
on another
U record player that I've
got all right folks so here's the bottom
of it I have taken the uh panel off and
uh you can just kind of get an idea of
what things look like
inside it's kind of pretty
serviceable um but it doesn't really
need much service I don't think but uh
the reason I did that is because if you
mess with it I can't get any sound out
of the right speaker but it seems like
that was because this was partially
removed inside of it they have just
plugged RCA cables into these uh Jacks
here so I've got them back down in there
I'm going to test it and see if I get
noise coming out of each side of the uh
pickup and then we'll go from there all
right folks we have made some progress
so the needle
here was
broken and so I thought what am I going
to do about that so I looked up the part
number which is a
51d and
unfortunately I did find a couple of
those on uh eBay in Canada but it just
you know I was thinking what in the
world it shouldn't be that rare to find
a simple little needle like this um so I
started looking around just trying to
figure out what kind of player this is
It's a Craig but Craig didn't make any
of their own stuff it's just rebadged
stuff it looks similar to a BSR but the
reason is because it's a
Glenburn Glenn burn apparently uh was a
gentleman that used to run BSR he left
started his own company making these
which he licensed to Craig and a bunch
of other people you know he would create
them and then put them here's company
would create create them and put them in
other people's Changers or equipment and
stuff so this is a a Glen Burn not a BSR
once I figured out it was a Glen Burn it
was a lot easier to find a needle so I
found
m853 and then DNS means
Diamond Sapphire uh I think it's 007 and
0.003 I always forget how many zeros
00007 and
003 right so this apparently fits well
in a
Glenburn it
is a pretty
much
identical
copy it just doesn't have the needle
broke
off right and I got two of them they
were only $10 so the uh I figured I'd
get two in case I need one down the road
for
something
so after I did that I was rubbing the
needle
and I was getting sound out of the left
but was not getting sound out of the
right I was getting a very muffled sound
out of the
right uh so that's when I took the
bottom
off found these were loose okay these
are just screwed up these are old so I
put a brand new set of RCA cables inside
of it no big
deal at my video game store I get RCA
cables all day long I literally had a
guy trade in a couple I mean I don't pay
anything for them but a guy brought me U
you know a whole bunch of stuff video
game stuff and there was a couple pairs
of RCA cables in it earlier today at
work so I get those all the time so they
have no value to me and I I even throw
them away from time to time but I've got
probably a hundred pairs of them at work
so it's no big deal so I've replaced
those now whenever I touch the needle
I'm getting good sound out of both sides
so I think we're going to be smooth okay
now here's the deal this is going to
blow your M so I was talking about this
lady here Roberta Sherwood she has an
orchestra and she says I got a right to
sing this is another example of me
misjudging the cover when I first saw it
I thought oh this is going to be gospel
okay let me let me show you something
here I got to write to sing now let me
let me blow your mind are you
ready like you know she's doing uh uh
Georgia I want to hear her sing that
right I got a right to sing but that's
not the whole song
title she's got a write to sing the
blues oh
really all right so let's check it
out so we're on we're on
phono we're evenly balanced if you
listen the
right left I'm hearing noise on both
new needle is
installed right
on hopefully this isn't copyright
[Music]
protected
[Music]
I got a right to sing the
blue I got a ride to feel
down I got a right to hang
around down around the
r a certain man in this whole
now keeps dragging my poor heart
around all I can
see is this one of those records where
it's got like the wrong picture on the
cover where you know they were doing
some stuff they shouldn't we got to go
look this woman up and make sure that's
really
her well guess what that's her
apparently she didn't get famous till
she was
43 and and sang
Blues crazy cool
[Music]
voice
Chang and fade has
[Music]
red
[Music]
after
[Music]
[Music]
Georgia
[Music]
Georgia the whole day
through all sweet
s Georgia on My
[Music]
Mind oh
Georgia
Georgia a song of
you comes as sweet and clear as
Moonlight through the
P other arms reach out to
me other eyes smile
tenderly still in peaceful dreams I I
see the road leads back to
you oh
Georgia
[Music]
georia
I oh
[Music]
sweet
my
Georgia Georgia
the whole day
through just
all
keep
my on
[Music]
my a song
of comes as sweet and clear as Mo
through the p
other arms reach out to
me other eyes smile
[Music]
tenderly still in peaceful dreams I see
the Lord leads back to
you
geia
no
[Music]
keep on
my on
[Music]
my all right I don't know how much it
let me play of that but that was great
whenever I saw this I thought oh I'll
listen to that and I'll take the work
and sell it I'm not going to sell this
this is great and I'm going to every
time I find her records somewhere I'm
GNA pick them all up and see if I can
get the whole collection she's fantastic
okay so uh there was a little bit of
a almost like a symbol like the there
was a s going on on the top of the uh
anything like the symbol or the way that
she uh enunciated stuff so I don't know
if that's the record or the recording
or if it's the amp or what so I'm going
to play a 78 to test that and also to uh
just see if it does that hissing in
[Music]
it oh you know I've got the
wrong I had it set on the wrong side of
the needle which won't hurt anything but
I swapped
[Music]
it it sounds great so that hissing must
be on that record or the recording or
something
[Music]
um
[Music]
all right so this one's going to be
copyrighted but we'll see if it'll let
us play a few seconds of it in honor of
Christmas and uh we'll see if it'll
stack the records all right and play
them with more than one on the
platter
oh
you and danc and
[Music]
and it's
dirty we're running that needle through
it it'll clean it up a little bit
though had a very sh all of the other
reindeers used to laugh and C him name
came to
say Rudolph with your nose so bright won
you guide
[Music]
my all right folks I think that's where
we'll leave it I'll I'll let my buddy
know the I can't figure out what's wrong
with the uh am and the FM gave it the
good college
try uh I don't have any schematics and I
replaced what I thought it might be or
what I would be able to fix which would
be the
capacitors between the power supply and
the tuner that had nothing to do with it
apparently but I don't even know what
the voltages are supposed to be so he's
just going to have to be happy with it
stuck on the radio channel from hell
where all they do is talk about murder
and
death uh but the phonograph Works real
good and I think he's more interested in
that also if he hooks up a tape player
to it um he could go back and forth and
play tapes and stuff too so I'll let him
decide what he wants to do with that but
there you go folks I hope you enjoyed it
this is a really cool Craig tuner if
You' got any ideas of what's wrong with
the tuner please let me know down below
the Craig uh turntable changer works
great other than the AV cables which is
about the easiest fix you can get other
than maybe the needle that was an easy
fix too um but hopefully uh hope he can
use this and he'll be happy with it
playing records if not he can trash this
part although the amp's good in it you
know and keep the uh keep the the record
changer which seems to work pretty good
so there you go folks let me know what
you think I will see you on the next
video this is amateur repair time we'll
see you back Tuesday with an arcade game
pinball machine or jukebox video
actually um I I know it's a arcade game
video so we'll see you Tuesday with an
arcade game video I hope you enjoyed it
and that's
that
