Don’t you just hate it when your outlets or switches are too deep in the box and you either distort the cover plate when you tighten the screws or have to leave a gap around the switch or plugs!???!!!!
DirtFarmer Jay demonstrates an easy fix to bring up the switch or plug to the right depth so the cover fits correctly and the installation looks professional. With this method, you don’t need a professional, you can JUST DO IT YOURSELF!
The secret is in using spacers. You can use mini-washers, or a readily available product that is inexpensive, and easily usable. If the electrical box is set back deeply in the wall, you may have to use a combination of spacers and longer screws (in the United States, the standard size if 6/32) - also readily available.
Don’t you just love being able to take care of things like this and JUST DO IT YOURSELF?
Hey, Dirt Farmer Jay here from DirtFarmerJay.com. Have you ever had a sunken receptacle or light switch
and it's driving you crazy? Well, I've got a quick fix for it. Stay tuned and I'll show you how to
solve that dilemma. Hey, Dirt Farmer Jay here from DirtFarmerJay.com. I bet you have one or
two of these around your household where the switch or the outlet is sunken a little bit
and to make sure that the outlet cover or the switch cover is affixed right, you have to tighten
this down and deform this or sometimes people leave the screws loose and you can see a gap
right around the device. Well, you don't have to live with that. There's a real easy solution.
The first thing you're going to do is go ahead and remove off your cover. All right, now that
you've got the cover removed, you can see this is exposed. Make sure you've turned off the power
and the next thing you're going to do is you can see these tabs here and in this case,
it was painted. So what we're going to do is take a utility knife and make sure that we score the
paint right here above these so you don't end up with stripping back paint. You don't want to make
this into a bigger job. So we're now doing that. We're going to take this. Now, here's something
to keep in mind. The only thing we're trying to do is to move the outlet or the duplex or excuse
me, the switch forward by putting spacers behind these screws. Well, there are actually
some spacers here that are already there. Do you see those washers right there? They're scored.
You can actually break those off if you so desire. Take out this screw and place them behind,
but many times that's not enough and there's actually a more convenient product out here.
Here is a product that is put out that these are plastic spacers. This happens to be by Gardner
Bender, but Lowe's has their own version. So does Home Depot and I provided that all in the link
below in the description. But how these spacers work is they accordion in and out and they're
cuttable. So every time I turn, that's a spacer right there, but I can double the thickness
by taking it, crimping it here and then cutting it right there. But let's suppose I needed a
thicker spacer. I would just continue to accordion and build the spacer I need. And as you build
them, you can see that the gap on the side is kept open to allow you to slip it around behind
the screw. We've estimated for our job that we only need one washer thickness. Now these are
meant to be teared apart in the field, but I think it's a little bit cleaner installation.
I just use a pair of scissors and I trim the edge off and get a nice clean edge.
And there we go. Now we have a couple of nice little washers that don't have a lot of excess
material. And as I place them around the screws, I'm going to put those lugs to the inside because
you're going to see that there's a space behind this. So let's go ahead and loosen these.
Let's go ahead and take our single spacers right here. I put these lugs to the back because there's
a space in the back that they'll naturally fall into. So I put one here and I'm going to go ahead
and tighten that down just a little bit to kind of help hold it in place a bit. Okay, let's go ahead
and put this one in the bottom. All right, and then we'll go ahead and tighten them back down
and don't over tighten, just get them nice and snug and keep the device centered in the box.
All right, there we are. As you can see now, this is lying more in plane with the sheet rock on the
outside instead of where the box is sunk in the bottom. All right, let's go ahead and put the
cover plate back on and let's see what we'll get. Okay, look at the difference here. Now this is
lying in plane with it. You don't have any gaps around it. This isn't caved in and so really nice.
It's a really easy solution. You can use the same solution for a duplex outlets, anything that's in
a box where the box is sunk back. If you have a tip or an insight like this you'd like to offer
to your fellow viewers, do so in the comment section below. And if you found this video to
be helpful, won't you like it? And better yet, subscribe to our channel. And when you do, ring
the bell because you'll get notified approximately every Friday when a new video comes out on
homeowner skills in the shop, around the yard, in the kitchen, or great product reviews for
the hands-on living lifestyle. Until the next time, this is Dirt Farmer Jay from DirtFarmerJay.com.