Tried To Fix a Chinese Tape Player And Made It Worse, Uh Oh! Amateur Repair Time FAIL!

Amateur Repair Time
257 followers
7 Video Views·Feb 15, 2025
We're trying to keep some of the vintage electronics out of the landfill. Many times when something stops working, it can be repaired if someone will simply take the time to attempt to repair it. This channel documents our amateur attempts at repairing vintage electronics we think are cool.
We don't typically restore anything, we're just trying to get them working again. We've found that most of this stuff was well built and with a little help will start doing what it was intended to do.
Radio Repair
Phonograph Repair
Clock Repair
Projector Repair
Ladies and gentlemen, this is Joe's Classic Video Games back with another cool amateur repair time
video for you this evening. If you're a fan of our channel, you know that we do arcade game,
pinball, and jukebox repair videos. Part of that is because of our love of all things old,
especially electronics and stuff. So we love old coin-operated equipment, but on the weekends,
I've been doing these little videos where I work on some of the other stuff that I collect and
find interesting. So radios, clocks, things like that. So the title of this video,
should I just throw this thing away? I wanted to talk about that a little bit
and then we'll decide. Okay, so this is a CD radio tape player by Audiovox,
and the tape player doesn't work right. So this is the type of stuff that I'm really not
interested in collecting at all. So it's a little more modern. It's probably only 10 years
old or so, maybe 15 years old, just looking at the kind of style of it. Kind of looks 2005-ish,
doesn't it? So where did I get this? I bought it at an auction. So you might think, well,
why did you buy it at an auction if you don't even want to collect stuff like that? It's because the
way the auction was set up, they weren't selling just that. They were selling four radios at the
same time. So they were selling that one, which is probably from 2005-ish, I would guess, right?
It was somebody's estate sale or something. And then they were also selling this one.
So that's a Sony, a little nicer brand. I kind of like it, but it's also going to be like made
in China or something, made in Taiwan. And it's probably from 2000 or so. It's not that old either.
Made in China. So to be honest with you, that's not really what I want to collect either.
Okay, so why did I buy both of those? It's because that wasn't the only
radios that they were selling. I had to buy more. I couldn't buy just the one that I wanted, right?
So they were also selling this. Well, now we're kind of talking. So this is a Panasonic.
I like Panasonic. And it's a flip clock radio, right? So the little numbers flip over.
Well, in case you're not up with all of the coolness, I am obviously. In case you're not up
with all of the coolness, this is considered very cool now, the little flip clocks, right? So this
here actually may be worth some money. So this is a little older. This would be from the 80s,
right? So we got 2005, 2000. This is probably 80s. Panasonic, made in Japan.
Well, this actually is something I would collect. This is something that I would find very cool.
But to be honest, that's not even why I bid on it. You know, which the one that I really wanted,
I wanted this one. There were four altogether. And this is the one I wanted. It's just a little
General Electric solid state radio. It has a Winston Cup NASCAR sticker on the side.
Okay. This one's probably from the 70s, maybe even the late 60s, but probably 70s.
So all four of them came together and it was out of an estate. So you can almost see where they
bought new radios as time went on, right? By the way, the tape player has a tape in it. We'll look
to me, you know, it does have a little bit of value, I guess to somebody, but to me,
it has no value. I don't want it at all. I wouldn't pay a dollar for it. If I saw it somewhere
for a dollar, I would not buy it. But here's the thing. This is made in China, undoubtedly.
And to me, it's no good. Okay. But this one's a little bit older and it's also made in China.
But I kind of liked this one. If I saw this one somewhere for a dollar or two,
I'd probably buy it. This would be a good little radio to work on your car with or something,
have it outside. A little Sony radio. It's a decent little radio, nothing special,
but it's a decent little radio. So what's the difference between this one and this one?
This one actually plays CDs, plays tapes. You could argue that this is a better radio.
This is actually, I'm sure was a more expensive radio when it came out.
So this was probably $20 or $30 maybe. This one was probably 60, 70 bucks, maybe even more
when it came out because it plays CDs and it plays tapes. Okay. So think about that. The more
modern one, I don't have any interest in at all and I don't see it as collectible. And I'm thinking,
I'm actively thinking about this, right? I don't see that as collectible at all. If somebody wanted
to throw that away, I probably wouldn't have that big of a problem with it. If somebody wanted to
throw this one away, I would be like, oh, don't throw that away. That's a neat little radio.
Okay. Now let's go back to the one from the eighties. To me, this is much cooler than that
one, right? And part of it's just because it's a little older. And so I definitely wouldn't throw
this one away. I mean, if you don't know, these ones with the little flip dials, some of them
are worth a little bit of money. This is a Japanese made Panasonic. Pretty cool to the right
person. You might get 50 or 60 bucks out of this radio. As crazy as that sounds, it might be worth
50 or 60 bucks to the right person because it has value. People, people understand that it's,
it's something cool. But to be honest, was this one as much as that one when it was new? Probably
not. That's probably the better. This one doesn't even play tapes or anything. It's just an alarm
clock with a radio building. And in its day, that would have been a cheap clock. I don't,
it's just strange. This is so weird how this works. And then this one very well could have
been the cheapest of all of the clocks of all four of these. It was probably, you know, kind
of on par with this. This is a cheap clock. This is just a general electric solid state of clock.
General electric solid state radio doesn't really have all that much value whenever it was around.
And so I'm saying, should we throw this one in the trash? Because it's, by the way,
the tape player doesn't work. That's why I'm saying, should we throw it away?
Should we throw that one in the trash? Well, there was a time when people threw these in the trash
because, you know, it was just a cheap little radio. Oh, that thing, you know, something's
wrong with it. Trash it. And there was a time when people would throw these in the trash.
You know, that's all Japanese radio. I heard somebody the other day, I was talking to them
about something and they said, oh, I think that's something I can't even tell if they're Japanese
crap. Like this was considered crap. Now it's considered the good stuff, you know. And not
too long ago or kind of in the time that we're in now, people are throwing these away for sure.
Right. And here I am thinking about throwing this one away. So it's just weird how that works. You
know, if I throw that away 30 years from now, is somebody going to be looking for one of those
because they remember having it when they were a kid or something?
I gotta say, part of the reason I like Sony is because I remember Sony being on our TVs and our
VCRs and our stereo systems whenever I was a kid. And part of the reason I like Panasonic is because,
you know, way back in the 80s, I remember seeing these old flip
clocks and I remember Panasonic being a great, cool brand. It was kind of what people had.
And part of the reason I like this is because it just looks like it's from the 70s. It just
looks cool to me. Right. So will the day come when people think that's cool? I don't know.
So what am I going to do? Well, let's see if we can fix it. Maybe we won't throw it away.
If I can fix it, we'll keep it. Well, I'm not going to keep it. I'm not going to keep it. But
if I can fix it, we won't throw it in the trash. Right. So what am I going to do with it if I can
fix it? I'm going to try to sell it. So at our store, if you don't know, we have a store where
we sell video games and we've got it all organized and everything. We try to keep it as clean as we
can, as organized as we can. But we've got one little section in the back where we've got just
kind of random stuff that doesn't fit anywhere else. So we've got one section for all of the
handheld games, you know, the Nintendo DS and the Game Boy and the Sony PSP. It's in this showcase
up here. All of that's here. And then we got another section where it's like the more expensive
games for the like the PlayStation or the PlayStation 2. And it's got a bunch of the
systems in the case, you know, like we've got a collectible Xbox 360 and we've got a,
you know, a PS3 in there and we've got an old Atari monitor that we picked up that we did a
video about a little while back. And so we've got some of our collectible stuff in there. And then
over here on the walls, we've got all the GameCube games in one spot, all the PS2 games in one spot,
all that, you know, everything's all organized. But we have one little spot where we just got
all kinds of crap, you know, just different stuff. And we've got a lot of computer games
there that I don't really know too much about computer games. So, you know, I could set this
over there and and sell it. Now, whenever I got these, like I said, these two here, I'm probably
not going to keep. Whenever I got these, I took I had another one like this and I took it to the
shop, cleaned it up. Of course, it worked great. And I put it on the shelf over there in that
little area that we're talking about. I put ten dollars on it. Somebody bought it for ten bucks.
Sat there about three weeks. Somebody bought it. So, you know, I figured out over the years
there's a vulgar way to say this, but there is a customer for every item. Right. So the
vulgar way of saying it is there's a butt for every seat. So, you know, they say that on a
baseball game. They don't say it on the game, but that's how people promoters think, you know,
any of this kind, you can sell about anything. Right. Even even something like this or like this
in my store, I could sell. Now, is it worth all the time and trouble? Not really. So what did I
pay for these four radios? Six dollars. It was an auction. I bid six dollars. I want it for six
dollars. Nobody wanted to pay seven. OK, so I think I did all right. So I took I had another
radio similar to this. I took it to the shop. It worked great. I put ten dollars on it. I put a
tag. It said works great. Exclamation mark because it did. Right. Somebody said about three
weeks somebody bought it. So I'll probably sell this one, do the same thing. You know, I can't
keep all of these. I'm going to end up with too many of them. And I've got a bunch more. This is
just some, you know. But this one is sitting around. If I can't fix that tape player, I think
I'm just going to throw it away. So hopefully I can fix it. So we're going to see if it's
more serviceable or if it's serviceable at all. Right. This one, I think I know what's in here.
There's going to be a big board with some or probably a small board with some transistors on
it. And that's kind of serviceable because I do a lot of through hole soldering on the pinball
machines and arcade games and stuff. So I'm sure I can fix this one. But it's it's not because this
is really well built. OK, this one is probably the best built of the four because it's Japanese.
That's probably a decently built little little alarm clock. Right. That one might have some
integrated circuits and stuff in it, but it probably still works fine. This one probably
still works fine. There may be some kind of mechanical problem where it doesn't flip right
or something. I don't know. I haven't tested it. But this one. I don't know if this can be fixed.
OK, but we're about to find out. So the CD player works and the radio works,
but the tape player does not. Let me show you the tape that was in it.
Now, remember, I got this from an estate sale, so, you know, let's be respectful.
It is a tape called The Greatest Generation by Tom Brokaw. Well, Tom Brokaw is reading it.
Let's see. Yeah, it says read by the author. So Tom Brokaw made a tape or a book called The
Greatest Generation. And this was 1998 Random House Audio, and it was manufactured in the USA.
That's kind of cool. So Random House Audio books. It's a Tom Brokaw book. Now, if you look,
see the yellowing there and you don't see it on this side, that's because
that was the tape that was in there. That was the last thing that, you know,
the gentleman or the lady that that had this radio player listen to. And you could kind of think,
I don't know if she had other tape decks in the house, but, you know,
this is probably the last tape they listened to. Now, I don't think they listened to it and then
died. I'm just saying they were listening to this and they turned it off and they never had a chance
to listen to another tape before they passed away or they listened to CDs or whatever.
That's kind of interesting. All right. So let me plug it up. I'll show you what it's doing
and then we'll see if we can fix it. I've never fixed a tape player and this is probably a bad
one to start with, but it's a good one to start with in the idea that I can throw this in the
trash if I screw it up too bad. We are plugged up. The radio and the CD work. Let's put it on tape.
We're on. Okay. I don't know if I really want to hear all that, but
that was almost creepy. So whenever I got this, I tested it out by putting a tape in it
and just letting it, I thought, well, maybe if I just let it play for like 10 minutes,
it'll speed up. No dice. I played it for a while. So then I thought, well,
maybe the tape screwed up. So you know what I did? I went and got a good tape.
Now, if you don't know, Randy Travis is the man.
So let's see what Randy Travis sounds like. Maybe it'll be good. Maybe it's over.
Maybe it ate it. Oh no. It's been the end of that side.
Okay. So obviously it's not playing at the right speed. Okay.
The CD player works fine and the radio works fine. So here's what I'm gonna do. I'm gonna
take the back off and just see if it's even serviceable. I hope it is. I hope I don't have
to throw this thing in the damn trash. I hope I've never fixed the tape player, but here's what
I think's going on. There's one of two things. I'm hoping that there's something in there that
I can oil, but I don't think there is. And then there are belts. And so I'm hoping maybe there,
the belt has slipped off a cog or something, or there's something that I can just adjust.
Cause if I need to replace the belt, I don't have any belts. So that ain't going to happen.
And the thing, it doesn't have very much value. So I'm not going, I'm not really going to buy
any parts for it. And I don't really, you know, we're running a classy shop people.
I'm not selling a damn radio with a broken tape player. And I'm not,
now I know I can put a little sign that says tape player doesn't work. Most people aren't
going to want to play tapes anyway, but I'm not going to do that. Right. So let me take it apart.
All right. I took the screws out and I'm unplugging this,
which goes there. And then the antenna is soldered on. I'm going to temporarily
unsolder that just so I can work on it for a few minutes. Again, we're not going to go
crazy on this thing, but you can see the PCB is actually pretty impressive, but it's got
some surface mount stuff that I would never be able to repair if there's a problem. So
it doesn't have a super fine pitch though. So, I mean, if I knew, if I could see that there was a
problem there, I could probably repair it. I'm decent at soldering, but you know, that's not
going to be the problem with what we're looking at. I'm, you know, I'm just talking about general
serviceability of this thing. That's because I think I'm going to take that off next,
but let me unsolder that antenna. Okay. So this is interesting. So I took all of those
screws out of here. And then there were two screws on a little board
up there in front of the tape player. So we are down to the tape player. So
my idea of oiling anything, remember I said, I didn't think that would be it. I was correct.
You can't oil plastic. It ain't going to help anything. So this is the motor. See the wires
run into it. And so it turns a rubber belt. That rubber belt is just fine. There's a date on the
back of this that says 2000. So the belt doesn't seem to be slipping to me. Everything seems to
be fine. And then there is a belt there that's also turning. Doesn't seem to be slipping.
Doesn't seem too loose. Doesn't seem like it's deteriorating. I think those belts are fine and
it's moving fine. So that leaves, could the motor be running at the wrong speed? Hmm. Right.
So if you look, there's the motor. See the two wires, red and black? They run over here to this
board. Okay. Now if you look at the back of this board, where they connect, they just immediately
run over to that ribbon cable. And they are the two right wires on this ribbon cable. The two left
wires on this ribbon cable are these two, which is going to be the pickup head for the tape player,
I'll bet. Or something like that. So those two wires also run to the ribbon cable. But the black
and the red, you know, surely would be what we're concerned with if we're thinking that the speed
isn't right of the tape of the motor. And so it runs at this ribbon cable and it's these two
right wires that come over here. And look what's right above that. There is a voltage, a VR-901.
Right. So there's a potentiometer right there. So that's going to change the voltage going to
the motor. I wonder if that's dirty. It looks dirty. And the voltage has lowered. Or
these caps or something has caused the voltage to lower. And that's why it's running slower.
And it's why it sounds bad. That would be my guess. So this wire here is the one that I unplugged.
It goes over to the AC and the batteries. So see the ribbon cable right there? See those two?
That's those two pins there. And if we follow those around, one of them goes to here, which
jumps up into this mess. And one of them wraps around to here, which jumps over into this mess.
And that voltage regulator is right there. And it's adjustable from the back.
So here's what I'm going to do. I'm going to put this sucker back together.
And then I'm going to attempt to measure the voltage
while it's playing, while it's turned on. And then I'm going to play a tape and see if the
voltage changes. And we'll see if the voltage seems anything like however many batteries
we're supposed to have in it. Nine. I don't know. One, two, three, four. So six volts.
So see if the motor will run on six volts. I mean, it should be.
It'll work with batteries that are only six volts. So four batteries. So
if we check that and it's like four volts or something, that might be our whole problem.
And we can also turn it while it's playing a tape and see if it changes it. So that's my plan.
We're trying to save this beautiful piece of Chinesium that I'm going to try to make $10 off.
All right, look at this crap.
The former president said it was a young man from the West Coast
who had promised his mother that he was going into the service to help people,
not to kill them. Mick knew Truman was talking about his dad, but Bob did nothing.
1.72 volts. Come on now. There ain't no way in hell that thing's designed to work on 1.72 volts.
We're going to hit it. I'm going to hit it. I'm going to do it. Here we go.
We're going to make it happen. He noticed something else about those common men who
acted. Let's see if we can speed them up. For them, he says, responsibility was their
juice. They loved responsibility. It may kick in because it may just be that pot's dirty.
And any time they could get a task and be responsible, that was what really got them
going. Nonetheless, Rick struggled for a time as a teenager when he realized what he'd have to live
up to with Bob as a father. It doesn't have it. They can't do it. They clashed over lifestyle
and values for a while, but he always tried to understand what his father had been through in
the depression and the war. That's all I got. I try to assimilate his values. That's the problem
though, right? I also try to show him the difference. Bob has another way of describing it.
Not quite there, he says. Let's see what that got him to. I'm a Volkswagen. Now that the children
Please don't bite me, Mr. Electricity.
1.83. I don't know what that motor's supposed to run on, but there ain't
two volts. Come on. Let's see what the voltage is coming in.
12.
I got to figure out what that voltage is supposed to be. All right, folks. So here is that little
circuit. So I looked up what voltage does a cassette tape recorder, a cassette tape motor
run on. And there's all kinds of different ones, but guess what? There's some called micro
motors or something like that. Minis or mini motors or something that want three volts. And
this thing is putting out 1.6 volts. I'll bet that's what it's trying to do. Okay. So it appears
that when the voltage comes in here, 12 volts, it runs to this cap and then runs off. Okay. Now
it looks like the voltage regulator down there to me. That's probably what runs the CD player
and the radio, which I can see over on this other side. I can see the AM antenna and everything.
So this voltage regulator appears to only be for that motor. So that's probably exactly what the
I think, although I haven't confirmed it yet, let's see here. It kind of even looks like you
may be able to adjust that voltage from the outside of the cabinet of the case by turning
that knob. Okay. So there is a little chip here that says UTC 6650. So I'm going to look at chip
up and see what the voltage in and out is supposed to be. I'll bet that chip is something
that creates the, that is what is actually changing the voltage or whatever. They probably
have something set up where as the battery voltage lowers, this keeps the voltage at the same speed,
according to that pot, so that it runs the correct tape volt. I mean, the correct tape speed.
That's my guess, but all this looks fine. I mean, we got like four caps here, four, five,
six, maybe, maybe those go with it. Nine, maybe nine resistors. There's a little ceramic disc
cap. That potentiometer, which looks filthy by the way, but it did work. You saw when I was turning
it. And then a couple of transistors, one of these transistors might be bad. There's also a diode here.
So I don't know that I'm going to have any of this stuff to fix this, but we'll,
if I can test the voltage going into this chip and the voltage coming out, that should tell me
where the problem is, hopefully. So I'm going to look up the schematics on that chip.
6650, UTC 6650. Well, sure as you're born, look at this. It's a motor speed control circuit.
Man, that must be what Michael Jordan feels like. Okay. Description, this chip is a monolithic
integrated circuit designed for the tape recorder. Okay. Well, there we go. Wide operating supply
voltage, 1.8 to 7. Few external components, easy speed control mode. There's a block diagram of
the inside. Here's its little characteristics. Some of this I will understand, some of this I
will not. See, like this is what I don't get. Output voltage characteristics. It says test
conditions, 1.8 to 7. But then over here it says minimum negative 1.2, typical 0.1, maximum 1.2.
I don't get that. It says right here, 1.8 to 7, but here it says negative 1.2 to 1.2.
I don't know. Something doesn't make sense to me. We'll figure it out. Maybe.
Look, folks, I'm not going to spend a ton of time on this thing. We've already spent too long.
I'm losing money. I'm working hard for this $10. I can't, I'm probably not going to be able to fix
it anyway because I don't have any of these parts. I've got some caps. Now this says
application circuit. I wonder how close to this application they actually did it. I mean,
if it's dead on this, yeah, we ought to be able to figure it out. Okay, so I'm going to try to
measure the input voltage. Something horrible happened in the closet. I don't want to even know.
Okay, input voltage, VCC, that would be input voltage. So it looks like ground is five and
six and the input voltage would be three. Now let's see if that's what they show on this.
Yeah, see VCC three. Where is our potentiometer? There it is. Look, it's between pin one
and pin four. Okay, so let's see how close that is to this little diagram. If they did it exactly
like that, I might be able to fix it. All right, I have measured some stuff and everything seems
about right except for this one. See how this says 510 ohm? When I measure it, I'm getting 900 ohm.
At first, I was thinking, well, this schematic just must be different. Everything seems about
right except for that one. I'm getting 900 ohm. So guess what? I took a little jumper
and I went like this and Tom Brokaw got real fast. So my theory is if that was a 500 ohm still,
I'll bet Tom Brokaw would sound just right. So I'm going to replace this resistor
with a smaller resistor and hopefully that'll fix it. So I'm going to try to get
to 510 or 470 or something like that. I think I've got a bunch of resistors. Let me see if
I can find anything close to that. So I've got some parts boards. Now, I don't want to take
parts off of these permanently, but I don't have any loose resistors. So I'll order some just so
I've got some. I thought I had some, but I don't, but I got a bunch of little boards. These are for
Nintendo Sanyo monitors and this is a board off of a Wells Garner 4600. So I need yellow, purple,
brown would be 470 ohms and it looks like yellow, purple, brown. So I gotta be honest,
I can't even tell what color that is. I think it's yellow, black. I mean, it's white, black,
red. So that was never, well, it's supposed to be a 510 according to this, but we don't,
we have no clue, right? That's the one that was in there. So let me look up that. Let me look up
white, black, red and measure it and see if it's anywhere near that. Well, I've got that all
completely backwards. Okay. So yes, this one is different, but if I short across this one,
it actually slows down. This one is correct. 9.1K. If I short this out to where it's gone,
it gets really fast. So I think I'm gonna do the same thing I was thinking, but instead of 9K,
I'm gonna do like 4.7K, but that's probably the correct one. That's like a 9K resistor there.
Hmm. Whatever. I don't care. I'm changing this. I'm changing. I don't have the schematics of
this actual radio. So this fixes it. That's what we're going to do, right? So I'm gonna
lower this resistor, which should fix it. I don't know. If it fixes it, it fixes it. If it fits,
it ships, right? So let me see if I can find something like a 4.7K and put it in there and
see if that gets it going. Well, I broke something. It didn't happen. I think I've
about fixed the tape speed. Listen really close. Because I tacked a 8K resistor on and that slowed
the tape, that sped the tape speed up a little bit. Sounds pretty good, but all my amplification
is gone. And if you look on the front, the display isn't working. So like the whole thing is dead.
If I turn it on radio or on CD, nothing happens. It just turns off the, well, it doesn't turn off
the tape player, but I think it's designed that way. So basically whatever CPU runs all of this,
I have fried or something. I checked the voltage regulator down here and it's still making its 5
volts. So I don't know. I think we're in over my head. We've still got the voltage coming in.
We've still got the 5 volts. So it looks like that same 12 volts goes up here, what we've
been messing with, and creates just the voltage that runs the tape player. So that's still working
and it's at just the right speed where, although it's not amplified, you can hear that it's about
the right speed. So I guess I fixed the tape player, but while I was doing it, I broke the
rest of it. So unfortunately, the answer to the question, should I just throw this in the trash is
yeah, yeah, I think I'm just going to have to throw it in the trash. So there you go.
So there you go. I don't know what I did. I probably got one of these screws touching
something and shorted something out, but if it's one of these surface, I would never be able to
identify it, but if it's one of these surface chips, I wouldn't be able to replace them anyway.
And yeah, so that's that. So I'll know in the future, if it's a Chinese one that's acting up,
don't even try to fix it. You're not going to be able to pull it off.
So I hope you enjoyed the video anyway. I'll make sure to put the title, I'll put fail in the title
so everybody knows that I don't fix it because I don't want people to be disappointed when they
get to the end and it doesn't happen like it ought to. But you know, that's kind of how it goes when
you work on things. You fix some and you can't fix some. So I'll save the guy's tape. I don't
really want to even listen to the tape. You know what I'll do? I'll save the guy's other three
I don't think I want to listen to a Tom Brokaw tape about the Bush family. I just,
I'm not interested in that at all. So I think I'm going to get rid of it. So there you go,
folks. So leave your comments below. Have you fixed this before? What was the actual problem
over here? Because the changing the resistor is kind of just a hack around it. You know what I
mean? That wasn't what the actual problem was, but I couldn't figure out what the deal was.
Everything seemed in spec. It could have been one of those two caps, but they're ceramics. You'd
think they'd be all right. So leave your comments down below if you've worked on anything like this
before. I don't know if I'll take a shot at one of these again or not in the future, but at least
I gave it a shot before I threw it away. I hate to throw a working radio and a working CD player
away, but they're not working anymore. So I guess I might as well. So leave your comments below.
Make sure to give us a thumbs up. I'm just trying to have fun on the weekend. Maybe I'll learn
something. I did learn a lot. I learned that that's how tape players work. They have a separate little
thing that controls the speed. So at least there's that. And like I said, I sold the other little
radio for like $10 that was almost identical to this one. So I got my money back at least,
and I learned a little bit. So I guess it's not a complete loss. So we'll see you on the next
video. We'll be back Tuesday with another episode of our Chipmates pinball machine,
and I think we're going to run those kind of fast because we've got several of them.
Whenever we do the EMS, people get kind of bored if I drag it out. So there's a ton of work on them,
so it ends up being a ton of videos. But if I put up a video and then wait a few days to put up
another video, it takes three or four weeks to fix one game. And once people have seen the game
in the first couple of videos, they kind of drop off to where they don't watch as much towards the
end. So I may run those back to back to back to get through them and get back over to working on
something else. We've got a whole bunch of stuff that we're working on right now. So I will see you
on the next video. We appreciate you watching. Hope you enjoyed it. Like I said, I'm going to
put fail in the title so people will know ahead of time that we didn't actually get the thing fixed.
So look at my clock that I fixed the other week. It works, but the hand slips. It's not
two ten till two. If you look, the hand wouldn't even be like that if it was almost three o'clock.
It's almost one o'clock. It's still late, but it's almost one o'clock. But the hand doesn't
fit right. If you watch whenever I messed with that, there was a little plastic
hour snail on it. And that little plastic thing's all screwed up. But it looks like I can
replace that with a metal one from one of their other models. So I might do a video on that down
their line. But I only wanted to work on this so I could get rid of it or sell it. So unfortunately,
I had to throw it away. So back in the day, people probably threw these other ones away.
That's probably there was probably some guy sitting in Rock Hill, you know, back in this
back in the 80s, and he couldn't fix this thing. So he threw the thing in the trash, right? This
one's a lot simpler. I ought to be able to fix that. If it's messed up, I bet it still works.
So China strikes again. I don't I don't necessarily think this is a badly built
little little radio though. It seems actually pretty good. But it's just it's so modern that
it's to the point where I don't completely understand the circuits that are going on
and things. So we analyze the one little tape speed circuit. I almost understood it. But
yeah, a little too complex for me. I think I'll go back to my oldies.
So I hope you enjoyed it. Give us a thumbs up for taking the trouble to film it for you. And
we'll see you back on Tuesday. Have a good night.
