CNC Repair Of A 1930 Grigsby-Grunow MAJESTIC 132 Radio Cabinet, With A Broken Leg!!!

Amateur Repair Time
257 followers
1.3K Video Views·Jun 11, 2025
We use a CNC machine To Repair the missing Spreader on this 1930 Majestic radio. These things were so heavy the legs often broke! This is Part 1 in a series.
Check out our Patreon page, for all of our channels. Contains outakes, concise arcade repair tips, bloopers, repair FAILS, Audio youtube wouldn't allow us to upload, and much more!
https://patreon.com/JoesClassicVideoGames
------------------------------------------------------------------------------------
Ladies and gentlemen, welcome back to Amateur Repair Time.
I am a sucker for these old console radios.
So when I saw this one, I couldn't resist.
I paid a whole $25 for it.
You're going to see me try to fix it in this video.
Now, normally on my channel, on our channel,
we do arcade game, pinball machine, and jukebox repair videos.
But on the weekends, I like to do some of my hobby stuff,
which is radios, old clocks, things like that.
Just vintage electronics are my favorite things,
which is one of the reasons why I work on arcade games,
pinball machines, and jukeboxes.
So if that's all that you're interested in,
arcade machines, pinball machines, or jukeboxes,
this video will not be about that.
So we'll see you back Tuesday with one of those.
But for those of you who are interested in saving,
you know, abandoned animals like this,
stay tuned.
This is a Grigsby Grinnell.
This thing's so old, I've never heard anybody pronounce it.
It's a Grigsby Grinnell Majestic 132, I believe.
I've got, like I said, I've got four consoles here,
but I've got probably five more, right?
I just love these things.
To me, they're so cool.
And it's incredible to me that they're not worth anything,
that, like, nobody wants them.
Just blows my mind.
Most people, they're too decent to throw them away, right?
But people don't want them, really.
They take up so much room.
But I couldn't resist this one.
When I saw it, look at the leg.
I did not do that.
I bought it like that.
I have successfully got it here in the same condition
that it was in when I picked it up.
Let me show you a picture of it as it was seen in the auction.
So there was another one there that was an old RCA
that was in pretty nice shape.
And a gentleman bought it, paid, I think it was like,
it went for like $125 or something like that.
And then this one, I won for $25.
Now, you might wonder, why was it laying on its side?
What happened?
Well, it's a majestic, I think it's Grigsby Grunow.
We'll get all into it.
We're going to do another video where we fix the thing.
But this video will be more about the cabinet.
But it's because it's heavy as crap.
That's why.
The earlier console radios had big long spindly legs.
It was just the style at the time.
So that's how this one was designed.
This one's similar, but they're not as tall.
And then you have this one here,
which I believe is an Atwater Kent.
You can see how long the legs are there.
This one's similar.
So when they first did them, they had these long spindly legs.
It was just kind of the style at the time.
And then they had these stretchers, they call them,
in between the legs that kind of hold it all together to make it strong.
Okay, so they built this really nice cabinet.
And these majestics were really nice radios for the time.
As I understand.
I wasn't around.
But as I understand, they were really nice radios for the time.
They're completely overbuilt.
But the cabinet isn't.
So the chassis of this radio weighs like 70 pounds.
The speaker weighs like 20 pounds.
So there was just a ton of weight up on those little legs.
And when you're moving it,
if you put a little, they're kind of wobbly,
you put a little pressure on one of those legs,
bam, you snap it right off.
So that's what has happened.
The only reason I bought it was because the legs still with it.
But there's a piece of the stretcher missing.
Okay, so let me show you a little better.
So that's the back door to it.
It's a, I mean, it's not a super clean break.
But you know, it's a good solid break.
That goes something like so.
And that goes something like so.
Right, so the stretcher from that one to the middle is missing.
I was hoping when I got there,
maybe it'd be laying on the floor somewhere.
It was not.
So we're going to have to try to make one.
If you look though, all of the legs are loose.
It's just, they didn't glue it.
It's all nailed together and bolted together, screwed together.
So when I went to pick it up, I knew these were really heavy ones.
And so what I did was,
I talked with the nice lady that was running the sale.
It was an online auction.
You bid on it and then if you win it, you go pick it up.
And there were people all over the place there that day.
Apparently somebody stole some Christmas tree ornaments.
It's just a shame what the world has came to.
They had to email everybody afterwards and say,
hey, whoever stole the Christmas tree ornaments
that somebody bid $5 for, bring them back, right?
So there's thieves out there, people.
Keep your eye out for a whole bunch of Christmas tree ornaments.
So I talked to the people and said,
hey, I'm going to take it apart.
And they said, that's cool.
So it was in the basement downstairs.
I just carefully took the back door off
and then took the knobs off the front.
It has all the original knobs
and then unbolted the chassis
and carefully removed it from the cabinet.
After I did that, I left the speaker in it
because it weighs a ton
and it was pretty securely fastened.
And then I carefully wrapped it on its side.
And then once I got it wrapped,
I set it up on its top and then wrapped it.
And then once I did that,
I was able to get it out of there with a hand truck.
So no big deal.
All right, so I'm going to go ahead and unwrap it.
And then we'll see what we can do about...
I think maybe I'm going to see
if I can maybe remove that stretcher
because it'd be easier to just make a copy of it
and maybe integrate that part back into it or something.
I don't know.
I haven't completely decided.
But let's see if I can unwrap it.
We'll see what it looks like underneath it all.
So you can see where I bought it.
It's in really nice shape, actually.
It's not perfect, but she's going to be a nice one.
I think it'll be good for the collection.
This switch here is a...
That may be the...
Well, that may be the power switch,
but there's also a local and a distant switch
that messes with the amplifier.
You can get an idea of the size of the speaker on this thing.
And it is bolted.
Now remember, we're upside down,
so it's bolted into the top of the cabinet
with this huge bracket.
So just to keep it from getting damaged,
I decided I could handle moving it with that still bolted in it.
So this is what we're starting with.
But yeah, look at this.
Now you can see that it's actually built very nicely.
Like look at the bracketing there.
But what's happened is all of that's loosened a little bit over the years
just from the weight.
And then it looks like they did have some of the blocking glued
and it just came loose.
So now, you know...
And this is just dust.
This thing is going to look nice.
Put some furniture polish on it.
This will be beautiful.
So it looks like this base was made so that you can remove it,
but I'm never going to remove it.
And I want to make sure that it can hold up
that ridiculously heavy receiver chassis in there.
So I'm going to glue like every joint on it
and just get it nice, you know.
Now the stretcher doesn't appear to be glued.
It looks like it's nailed,
but I don't know if I can get that nail out without damaging it.
But I'm going to try.
If I could get that off,
I think my brother could help me make one pretty decent.
And then, of course, these are two pieces.
They're just that middle piece is just a separate piece.
So it looks like maybe there's a veneer on it or something.
I'm not going...
I'm not trying to make it perfect.
I'd like to reuse the part that I've got on the other leg
and then just make the part that's missing going over to there.
And it's about...
What did I figure out it was?
An inch and a half.
No, an inch and a quarter thick all together.
But like, see that line in the middle?
I think that's a veneer.
So I don't know.
We'll see what we can do.
Let me see if there's any easy way to get that out of there.
Well, after looking at the piece that I've got,
that nail is not what's holding it to this leg.
I thought maybe it was driven in at an angle or something.
But like maybe there may be a dowel pin in there
and it's nailed to the dowel or something.
I don't know.
But if you look at this, you know,
you can kind of see where there I think was glue.
So I don't believe I can take that off.
So I think what I'll do is just trace it.
That'd be good enough, wouldn't it?
Trace it and then the profile of it we've got on this.
And it does have some veneer.
That's obviously veneer.
That's chipped off or it's plywood or something.
I don't know.
So we'll just see if we can make something similar
that will at least be the same shape.
And then if we stain it, hopefully will be the same color.
And then luckily it's on the back.
Let me see what I can come up with.
Okay, folks.
So I have a program named Aspire.
So what I did was I took a piece of cardboard
and I traced the one stretcher that we have
that's still complete.
The other side must be a mirror image of it.
So I traced it and I cut out this little piece of cardboard
that appears to be exactly what we need.
And then I scanned it into the computer
and changed it into just a, you know,
a black and white clip art image.
And then I traced that in Aspire.
Now this is not perfect, but this is what I came up with.
So I've divided it in half.
I'm going to cut it in two pieces
so that I can get the proper thickness that I need.
I'm just going to cut it out of a plank of wood.
I'm going to use poplar because they sell that
at the hardware store right down the street.
I don't have access to walnut.
Walnut would be better.
So in Aspire, you can set up this little profile
in their molding thing.
So basically it's going to cut this profile
on the edge of this piece that I've made.
Now you can see that like right here,
it's a little more narrow than right here.
This is not perfect.
This is all drawn by hand basically, right?
And so this is the backside of it,
bottom half of the same thing.
And this is a little profile
that is going to cut on the edges of it.
You can see again, it's thinner here than it is here.
So this is not going to end up perfect,
but this is how I've got it set up.
Now, if I go to my tool paths over here
and we preview our tool paths,
basically, let me see.
The first thing it's going to do
is it's going to go through.
Well, that's the wrong one.
How did I do that?
It's going to go through
and it's going to cut a little off the top
to make it the right thickness, okay?
Then the next thing that it's going to do
is it's going to cut the little bevel on one side.
And then the next thing it's going to do
on my CNC machine,
it's going to cut the little bevel on the other side.
What you would normally do with a router bit.
Then cut one there that's slightly different.
Cut one there that's slightly different.
And then finally, cut them both out.
And I'll be left with two pieces of wood
that I can glue together
and it'll make something similar to what we've got.
If you zoom in on this,
you can see that it can actually
cut a three-dimensional
kind of like routered edge
that normally you would have to do with an actual router
and have the proper bit and all of that.
And I'm not trying to make it perfect.
I'm just trying to make it something
that'll replace the missing piece.
So this is a good example of using modern technology
to do something that it would have took someone
very skilled in the past to do,
to cut that exact shape out at just the right thickness
and then run a router bit around it
that you've got a certain bit.
You know, like if you didn't have the right bit,
you'd have to make one or something.
That's a pretty common little profile though.
You could probably get something pretty close
at the hardware store.
But I'm not a woodworker,
but here I sit, you know,
we kind of have this problem
where we're going to have to try to fix this missing piece.
So this took me a couple of hours
to get doing it, get set up in the computer.
But now that I've got this, I have access to a,
well, I own a flatbed CNC machine.
And so this should cut out
pretty much how it looks right now.
So I'll take it down to the warehouse
and we'll see if we can cut one of these suckers out
and then we'll go from there.
What have you got me into?
When I need something done, I know who to call.
What are you doing Donnie?
All right, so we've got the poplar.
I got it at the Home Depot
and we've got an eighth inch end mill
and we're trying to cut it out.
Donnie says he thinks it's going to be perfect.
Got to be, I'm messing with it.
All right, so Donnie's into restoring radios now.
So we'll see how this thing turns out.
Hopefully it don't take all day.
I didn't really have the correct bit.
So I just went to Home Depot
and got an eighth inch straight bit,
but I think it worked.
It's like a puzzle.
Maybe, does it go like,
I'm never any good at these things.
It's not perfect, but I think it might work.
Yeah, baby.
All right, folks.
So Joe's going to help me drill a hole in it.
We cut this little dowel rod,
so we got an extra dowel rod.
Seems to be the same size.
It's about 7 16ths it looks like.
Now here is what we came up with after we glued it together
and the end of each piece needs a hole in the middle
that'll take that dowel rod.
So we're going to clamp it to the table here
and then drill a hole in it.
And I don't think it has to be perfect.
Obviously this isn't perfect,
but I think we should be able to do something with it.
Hopefully we won't break it into a million pieces.
I'm gonna put the clamp real close to the end
or try to so that it'll hold it clamped as it's drilling it.
And we're going to go slow
and hopefully we won't rip it into a million pieces.
So we got our missing dowel rod in
and I'm sanding it a little bit, trying to clean it up.
I wanted to show you this before I get rid of it.
This is the little bevel that it cut on the CNC machine.
But if you notice, there's all these little
stair steps in it.
Because of how the, I had the wrong bit basically.
So I'm going to sand that just a little bit,
knock that off a little bit,
get a little more smooth like how it would look
if you actually used a regular router to do it
with the proper bit.
Also, since I traced it with this piece of cardboard,
it's not perfect.
There's thinner parts and thicker parts.
So for instance, if you look,
so it gets thinner there and it's thicker here.
There's probably a way in Aspire
to use that piece of cardboard to get the curve
and then to just thicken it out
so that it's the same width all the way through.
But this is amateur repair time, folks.
It's not going to be perfect.
Also, I am not a wood refinisher.
So staining this poplar to look like walnut
is going to be the hardest part.
But I think we've about got it ready to test fit.
So let me sand on it some more
and then we'll see if we can get it in the cabinet.
All right, so I've got really strong wood glue on it drying.
I didn't take apart the other joints.
I just tried to soak them in as much glue as possible.
That one I had apart and was able to get glue all in there.
This one I had apart and was able to get glue all in there.
And then I got a whole bunch extra.
Look, folks, I'm of the firm belief that
too much glue is a good thing.
So we're clamping the leg back on where it broke.
It had broke pretty close.
Well, it was all jagged, but everything was still there
halfway through where it mounts.
And it was all made just a nice clean fit again.
Gave me all kinds of surface to put glue on.
So I just soaked it.
I didn't get, I don't have this perfect
because this one, the original is a little wider.
This one I didn't make quite as wide.
It still lines up pretty good, but I got the curve slightly wrong.
So it doesn't hit this middle piece perfect.
See how this follows this?
This one, it loses it a little bit.
And you're going to be able to see that from the top.
But, you know, considering what we're working with, I'm very happy with it.
Also, there was a little dado in there that goes inside of it.
So I cut that out and it seems to have fit together pretty good.
I think we're pretty good.
It's not going to be perfect, but it's going to be strong once all this glue dries.
All right, folks.
So I got it all mounted, all glued, threw a little stain on it,
let the glue dry, flopped it back over, and there you go.
So that's a Grigsby Grunow Majestic radio cabinet.
I've been working on the cabinet so long I can't remember what the model number was,
but we're going to do more videos on this and the model number will be in the title up above.
The first thing that strikes me is the thing is so tall compared to all the other ones.
That's an Atwater Kent there beside it and it hasn't been cut.
That's just, I don't believe it's been cut.
Maybe I ought to look that one up again just to make sure.
That's fairly big, you know, compared to most of them.
But look how tall this Majestic is.
It's about, it's almost, it's probably five feet tall.
That's big for a radio from back then.
And then over here, I've got a, this is a Kennedy.
That's a Kennedy.
You know, it's just kind of an off-brand.
I don't know much about it.
One of these days we'll work on that one.
It's had some, it's a fair share of wear.
And then this is your, you know, post-World War II Philco stuff.
I believe that's Philco, more common.
Same here.
So you've got, you know, these two are very similarly sized.
This Kennedy is a little bit taller and this Atwater Kent is as tall as the Kennedy.
But this one takes the cake.
So I don't have any stain that's a perfect match.
That poplar, you know, and I need to do some more sanding and work on it a little more,
but all in all, I mean, it's already presentable compared to missing and the leg knocked off.
And of course you can't tell really that it ever had any damage.
It's just, you can tell that that's the wrong piece of wood.
If you look at it close enough.
Very cool.
Check this out.
It's really in beautiful condition.
So on the next video, we will work through the receiver a little bit,
the chassis and see if we can figure anything out with it.
And eventually we want to get the sucker to play.
Just looking at the schematics and the advertisements for it and stuff.
They were really bragging about this radio.
So they were bragging about things like AG, AGC, what is it?
I screw this up so often.
It's not automatic volume adjustment.
It's automatic gain control, AGC.
So it's not AVC, it's AGC, automatic gain control.
Of course, they didn't call it that.
And this is early, you know, this is the twenties.
So they're bragging that no matter what station you tune in,
it's the same strength of signal they're saying, right?
Which I guess is probably their version of AGC.
And it has a switch on the side that I'm interested in,
where it switches it from the long antenna to local.
And it seems like what that switch does is it just grounds the antenna.
So it just shorts out the antenna, basically, which if that works,
I may be able to get some reception without an antenna
from local stations just with that, that wiring.
But we'll see.
But I'm glad that I was able to save it, get it back up on its feet.
Oh, I should show you the, you want the test.
It ain't going nowhere.
If you think that's wobbly, Atwater Kent, same thing going on.
It's just those ones with the legs.
They're a little spidery, you know, but it's nice and solid.
Like I said, I always give it whenever I load up my truck with arcade games,
I do the same thing.
I give it a wobble.
You know, if it's going to break, I want it to break while I'm messing with it.
I got my hand on it.
You know what I mean?
So it should be able to withstand a little bit of stress.
So like if I load arcade games in a truck for somebody that's hauling it,
somebody's bought one of our games,
I strap them down and then I shake the truck and just see if they wobble.
They're going to fall off the truck or not.
It's better for it to do it while I'm standing there doing it than it is
while they're driving down the road, right?
That's how I always check, strap down loads.
So, you know, I'm not trying to break it or anything.
What do you think?
I think that's sturdy.
That's not going to break.
So the glue saved us.
And there were also, if you remember,
there were two screws in the bottom of that plate underneath there.
I put those back in, of course.
But just glue, glue, glue, lots of glue.
So I like it.
So leave your comments below.
Let me know what you think so far.
Hopefully, we'll get this thing up and running soon.
So we'll work through the receiver next time, get a look at it,
take it apart and see what's going on inside of it.
Give us a thumbs up for taking the trouble to film it for you.
And remember, folks, this is amateur repair time.
This is not fine woodworking masterclass.
This is amateur repair time.
And the purpose of these videos, I haven't reiterated this lately.
I should start saying this in every video.
The purpose of these videos is not to brag or show off.
It's to show you that I have no clue what I'm doing.
But simply because I'm willing to try, I get a lot of stuff done.
So on a pinball machines, arcade games, whenever we do those videos,
I know a little more what I'm doing.
And I keep getting from all these people that they're afraid to do it
or they don't want to work on it or whatever.
I'm trying to inspire people that you can work on anything you want to work on.
This thing, nobody would have bought this.
I bought it for $25 complete.
That damn thing was on the way to the trash heap, right?
Because nobody wanted to take the time or the trouble to work with it
or they thought they couldn't.
I fixed it.
The main problem was the leg was broke off.
We fixed it, right?
If I can do it, you can do it.
So I hope it inspires you to find something old
that needs a little attention around your neck of the woods
and maybe fix it up too.
This thing's been here for, you know, 90 years.
The least we can do is help it a little bit.
You know, come on.
It just needed the leg glued back on, folks.
It wasn't that big of a deal.
