One of the ways you can support our channel, is by checking out the items we promote on Amazon. If you purchase any of these items, or even follow the link, it pays us a commission. Even if you purchase other products after following the link it pays us a commission.
At the moment, we'd like to show you this beautiful Weller soldering iron that we use every day in our videos. The Weller adjustable temperature irons work better than cheaper ones because they attempt to keep the tip at a certain temperature, and are a higher wattage. This helps you get nice solder joints and makes it easy to do repairs.
These links below are to this product in various areas of the world, thanks for watching!
Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
Ladies and gentlemen, this is Joe's Classic Video Games
back with another cool pinball repair video
for you this evening.
We have the incredible Evil Knievel.
That's right, the Bali Evil Knievel pinball machine
has made it to our shop.
And we are going to be fixing it.
We had a gentleman bring us several different
pinball machines and we're fixing all of them for him.
So we've been working through a whole bunch of them lately.
So let's go ahead and set it up
and then we'll see what kind of shape it's in.
So this gentleman operates these five machines
and each of them has a kind of strange problem
that he was trying to figure out.
And so he brought them to us so we could
troubleshoot the kind of the tricky part
and then they can do the rest.
They have the ability to clean them up
and operate them and do some service work on them.
But if it's something tricky,
they wanted us to give them a hand.
So we said, sure, why not?
So we are on to this Evil Knievel.
Boy, I love this game.
This is a really cool pinball machine.
It's just the right era and look and everything.
If you look on top of this funhouse,
we have a General Electric television
that I think, I don't know if that was Evil Knievel themed
or if it's just the same colors,
but it came out around the bicentennial
and Evil Knievel was pretty cool.
So anyway, the whole red, white, blue thing.
And here we are at the 250th centennial,
or no, not centennial, 250th anniversary of the USA.
So maybe Stern or somebody will do something
like that this year.
But yeah, so we got to try to fix this Evil Knievel.
This thing has been played pretty hard.
The play field's pretty worn on it.
There's just a bunch going on.
So it's worn heavy here in the middle.
I think the gentleman said eventually
he's going to put a hard top on it.
There was a bunch of wear on this right kicker
and then they have put, someone has put Mylar over it.
So now the wear is under the Mylar.
So if you go to pull that Mylar off,
it'll probably pull up a bunch of paint.
On this side, there's some wear too.
This thing's just been played a lot.
Wear around the middle here.
And I think it just shows you
that it's a very popular game.
People like it.
So someone has went through and shopped it at some point
because it has all new rubber rings.
They look like they may be silicone rings, not rubber.
And it has pink flipper, purple,
pinkish purple flipper rubbers.
Looks like all the plastics are in good shape.
These three here have been replaced,
but the two up there were not replaced.
There's a baggie over there
that had something in it, I guess.
And what supposedly is going on with this one
is that every time you play it,
the right kicker fires when any other switch fires,
is my understanding.
So it'll be interesting to see what in the world that is.
So not knowing anything more about it
other than what the customer said,
there is an issue on some of these early Bally's
where if you hit the pop bumpers,
it makes one of the kickers fire.
So I wonder if that's what's going on,
or if it really is,
every time you hit any switch, it does that.
I can't remember what the fix is
for if you hit the pop bumpers, that kicker fires,
but I've got it written down somewhere, so I'll find that.
So that may be all, that will be the low end.
So if that issue is what's going on here,
we'll just have to fix that.
So it'll be a good little video showing you how to fix that.
The back glass on this
is just one of the best back glasses ever,
but really at that time in the late 70s,
best art ever.
Bally certainly, like every single game had nice art on it.
And Williams too, there's a few,
there's a couple of Williams ones that are a little weird,
but you know, Williams also killing it at that point.
So it's a mirrored back glass,
which they did with mirrored ink, you know.
They basically made it a mirror,
but they made it a painted back glass with some clear areas
and then made the clear areas a mirror
as the final step.
It was just freaking amazing.
Most of these mirrored ones hold up really well,
I think because they just put more ink on them.
So it's just a different process.
And you see the bike chains around the scores.
Of course, lots of stars everywhere.
Evil's little one logo.
1977 copyright date on it.
And of course his big old heavy Harley Davidson
that he used to jump with.
On the back glass at the top,
you have the creme de la creme.
There are these four bikes that are illuminated
with lights in sequence.
So the whole time the game is on,
it's lighting these up in sequence
to make it look like he's jumping over the school buses.
Not the school bus, the regular buses.
And I've mentioned this several times,
but if you watch when he jumps
and you compare it to how somebody jumps now,
Daredevil jumps now.
When he jumped, he had the front tire really high
and the back of the bike would drag
because it's very heavy.
So he would jump and as he went,
the back of it would lower
because it's just so much weight.
It's nothing like they do now.
I'm not a big expert on this crap or anything,
but if you watch now, they're jumping dirt bikes basically.
If you see anybody doing stunts.
He didn't jump a damn dirt bike.
It was a full size Harley.
Heavy as hell.
Look at that crap.
And so they perfectly got the silhouette right.
That's what it looked like when he jumped over stuff.
The bottom of it was dragging
because it was just so heavy, just freaking.
There will never be anybody even similar to that guy.
Even his son, nobody even similar to the guy.
Just a completely unique, insane Daredevil
that had a really interesting, crazy personality.
And this pinball machine entombs that forever.
There he is on the side with his suit on and his cape.
That's so cool.
All right, so let's look in the back box
and see what we're working with
and see if there's any surprises in there.
You know, whenever these get moved,
sometimes stuff falls out of place.
So let's see what's going on inside of it.
Here's the insert panel.
Looks like an original ballet display.
Sometimes they say stern on them, it's a stern one.
Ballet, ballet.
This one's slightly different.
See how it's got a comma?
That one's been repaired or replaced.
It's also a ballet though, the board.
It doesn't matter.
None of this matters.
It's just interesting to look at.
If you look, see how the number is right here?
Dash 15.
Same there.
These two have been changed.
Evil Knievel insert.
All right, so here's what we got going on in the back box.
So we've got the power transformer here
with the original rectifier board.
That's cool.
Got some hackage.
Got a little hackage going on.
So a pin has popped out of one of the harnesses,
probably because it fried.
So see the corrosion on that?
So we'll have to fix that.
And then you've got these three plugs here.
This bottom one often would overheat
and break in half in the middle.
So they may have already repaired that
because I don't see any burn marks on it.
So we'll look at that
and we'll figure out where that pin goes.
And then we have the solenoid driver board up here.
Who knows if that's original?
Doesn't really matter.
Someone has rebuilt it though, so that's good.
They wrote 725.
That would have been when they replaced this.
Well, that would probably be when they replaced
that voltage rectifier or voltage regulator.
They also had to replace a couple of chips.
They replaced the main filter capacitor
and they replaced the capacitor for the displays.
So that's nice work.
Looks like they did a good job on that.
And then over here,
we have a brand new Bally PCB.
I have never seen this particular model.
Let's see who made this.
www.lycee.dev.
I don't know them, but I assume it works fine.
In the pinball world,
most of the products that come out are pretty decent
because they have to be.
Because there's so many nice reproductions
and stuff available
that you can't really get away with making a crappy one.
So I don't understand why it's got the extra little board.
It must be some just more modern way of doing it
that I'm not familiar with,
but I'm sure we'll be able to mess with that
and get it working.
And then you have the lamp driver board.
The thing to look for on these is a lot of times
you'll have the original board
would have had a battery right here
and it just drips nonsense down on the board below it.
So you'll get all of this alkaline damage,
especially at the top.
And then it will leak all the way down
these things a lot, usually.
This one doesn't have any of that.
So it either avoided it or it's one out of another game.
So all of this looks good.
Of course, we have to plug these back in.
I like kind of looking at the connectors
and seeing how they look.
Like, look at this.
Some of those are white.
So that's basically corrosion.
So that's not going to work very well.
We'll put it on here just to prove it,
but that's not going to work great.
Okay, and here's the big connector.
That is what the displays plug into
and see how they're not white.
Those are probably fine,
but it wouldn't hurt to replace them.
And then here's the worst one, usually.
This is the one that the power came into.
And when the battery was right here on the original board,
it would rot this whole bottom.
So this one would get the brunt
of the battery corrosion, usually.
If you look, they have replaced a few of them.
You can tell the top three are shiny,
but the rest aren't.
They look all right, but they're probably questionable.
So we'll see if anything happens there.
All right, so that's plugged back in.
Since that's a new board, in my opinion,
it won't really hurt anything if it doesn't work properly.
Because what you're going to end up getting
is stuff just doesn't work
if the connectors are wrong or something.
Sometimes, too, you run into the issue
where like on a new board,
there's a special way to set it up or something
that you have to, maybe it's not set up right.
So you got to think about that.
All right, so everything looks pretty cool up here.
Let me close this back and take this glass off,
and then we'll look under the play field
and see if there's anything strange down there.
All right, so we've got a replaced coil here.
Now, on this other one that we did, the eight-ball champ,
we had a couple of bad coils in it.
So we'll have to check for that.
You have the three thumper bumpers,
and there's a kick-out coil down there.
I don't see anything that's like hacked
or looks obviously wrong.
You've got this drop target reset coil here,
and then the two flippers.
Looks like maybe one of them's been swapped at some point
because they're different colors.
But yeah, I don't see anything jumping out as crazy.
You've got the filter, the line filter over there,
which has the varistor on top of it
that doesn't look like it's ever been fried.
If you don't know about those,
that little red disc on the top,
if this thing gets hit by lightning
or a power strike,
that thing there will absorb the brunt
of the extra juice and blow up.
Sometimes it'll even singe the side of the cabinet there,
black, but it keeps all of the boards
from getting that extra power and burning up.
And then we've got the four chimes setup
that Valley was using
even after they started making solid-state games.
So this is a solid-state game, but it still uses chimes.
They didn't have a soundboard yet.
And then here is the tilt bob
and the tilt ball setup, the level tilt,
and then the slam tilt.
So all three of these are tilt switches.
This one, a little ball goes in here.
It looks like a pinball, but it's slightly smaller.
It says, ball tilt assembly,
put 15 16th inch small ball shipped with game
into this assembly.
So you put the ball right here
and gravity keeps it down here.
And there was a line connected to this metal here.
And then if somebody were to pick up
the front of the machine to cheat, you cheaters.
Oh, you cheaters.
I've heard all the stories.
I've heard about how you used to pick up the front
and put a little skull cap.
Now I've heard all about it.
If you were to do that on this one though,
you would be foiled because the ball would roll from here
down to here and it would hit this little switch here.
And so the ball would hit this
and it would be hitting that at the same time,
which would connect the two together.
And that's a tilt switch.
So it would tilt.
And then this one,
if that one didn't get you, this one certainly would.
So this is the plumb bob tilt.
You shake this sucker.
Eventually, if you get too crazy with it,
eventually that's gonna hit the ring.
If it hits the ring, it shorts out.
That's another tilt.
This can be adjusted.
So if you loosen this screw,
you can move this graduated weight here up
to where there's less and less room from it to the thing
to make it tighter or looser.
And then this one is just the Jerry Lee Lewis one.
If there's a whole lot of shaking going on,
this slam switch will hit and that'll tilt your ass too.
So you better watch around these valleys.
They got you figured out.
There was also usually one on here
where if you kick the door too hard, it would tilt.
Boy, they have cut a bunch of freaking wires.
They must've been tracking down that short or something.
Look at this.
Oh Lord, that's a bunch of cut wires.
We'll have to figure that out.
Yeah, everything looks pretty cool
other than this kind of stuff.
It's all a little minor stuff.
I don't see anything just crazy or insurmountable.
So let's put the play field back down
and we'll try to boot it up and see what happens.
All right, folks, we are going to do a smoke test.
Now this board, if it's like the original,
which I assume it is,
it will have an LED somewhere around through here.
And when this thing comes on, it should blink real quick
and then it should give you seven solid flashes
because it's doing a little self-test
and testing all of the chips on the board and other things.
And it's a completely new design,
but I would imagine it's got the same kind of test setup.
So let's see if she'll do anything.
Also, it's a smoke test.
So if anything locks on, I'm gonna turn it right back off.
Three, four.
Yeah, the self-test is completely different on this one,
but sounds like it might've booted up.
Let's see.
Now the Playfield has no lights on it
that are computer controlled,
but some of the very early games didn't have a track mode.
I don't know if the Bally's did or not.
I thought all the Bally's did.
Let's see.
Yeah, it looks like we're up.
It's just none of the lamps are working.
So you can see all of these lights that are on.
These are all general illumination.
They're just the ones that light up things.
The other ones are indicator lights.
So like that one, all these down here.
One of these should be coming on and saying,
game over, you idiot, but they're not.
And then there should be something on here
that says double bonus or something.
Now over here, we've got a Charlie's Angels.
That's also this gentleman's.
And the Gottlob games usually did not have an attract.
So like the lights, there would be a few on,
but they just wouldn't do anything.
So we'll find out whenever we get to that one.
I saved him that one for last
because I think I might enjoy it the most.
So yeah, there's no switch to illumination.
There's probably just a fuse or something
on this rectifier board.
It very well could be this line that we've got here
that's not in the right spot.
So again, I don't know about this board,
but it says on and it says valley.
So I assume if we looked in the manual,
it would tell us all about that.
But who's got time for that?
This one is the zero crossing detector.
That's kind of interesting that they're doing it that way.
So that's got a blinking, that's the zero crossing.
And it's literally when the AC wave goes over zero
because they use that for some stuff on these valley games.
So I suppose that's blinking every time
the AC goes below and through zero.
So it's, you know, AC does this.
And so each time it crosses, zero crossing,
it's blinking.
So I suppose that's probably right.
All right, so let's lock this back up.
And what do you think?
Do you think the solenoids work?
We kind of already know they do
because we heard the chimes.
Those are ran by coil.
So let's see if it'll start.
It's on free play or anything.
Nada, nada.
Let's try to put some credits on it.
Nada.
All right, so why would we be having switch problem?
Because of that one connector.
Remember that was all corroded looking?
That's the switch connector.
So I think that's one of the,
and I'm not complaining about anything.
I'm not calling anybody out or anything.
But a lot of times when you have a board issue,
there's other issues in the game
and a new board is not gonna fix it.
I mean, it's worth trying it, I guess.
And on these valleys, there's certainly lots of boards
that have been completely eaten up by that battery.
But it could be that this connector is the main problem.
It does look pretty bad to me.
So what I'm gonna do is I'm gonna pull each one
of those pins out and put a brand new one in it.
And then I'm gonna take the pin that I pulled out.
I'm gonna make a big pile of them right here.
And then I'll show you why those aren't making good contact
to these brand new pins.
Right, so these are new, but these aren't new.
On the old board, these were probably corroded all to crap.
Well, my auto-focus doesn't wanna work too good,
but these are the new ones, these are the old ones.
They are just absolutely crazy corroded.
So that's gonna be our switch problem, look at that.
That's what the board usually looks like
if that battery has leaked.
So it stretches over and gets that connector.
It stretches over and gets that connector.
So we're gonna redo both of those.
So several of these have actually been broken.
And when, like this one, for instance, I pulled it out,
but look, the piece is still in there.
So it's like, they're just deteriorated so bad
that it's probably causing all kinds of problems.
That very well may be why our lights aren't working
on the play field too, because the signals come,
I think, from this connector.
It may be that connector, but we'll check all that out.
So I got those two done.
So let's see if we can figure out what's up with this.
So it's a white and yellow wire
that's missing from one of these pins.
Now, this one has a plug in it,
and everything else is populated, isn't it?
So it must go there, but we'll check to make sure.
Be interesting to see what that is,
because they knew it was loose
because they had tied it over to the side.
So let's see if we can figure out what that wire goes to.
So the color code is 53,
and so it's pin 13 on the transformer.
And it says solenoid bus.
So you would think, oh, well, why isn't the solenoid wire,
the solenoid's still working then?
Maybe it just goes to the play field
and it doesn't go to the back box or something.
Let me see if I can figure out
where the other end of it goes.
Okay, so it's actually the voltage
that makes the knocker work,
and that's all it's used for.
So that would explain why they may have done it on purpose
Yeah, they very well may have done it on purpose.
Some people hate the knocker,
some people even hate chimes.
We sold a game to a guy one time
and he got all mad and left us a bad review
everywhere he could because the pinball machine
was too loud.
It was an electromechanical pinball machine.
And he was upset that he couldn't make it quiet
while his wife slept
and he played the pinball machine downstairs.
I am dead serious.
He unplugged the chimes, but it still made knock, knock,
and you know, noises and crap and boom, boom, boom, boom.
Oh no, could not handle it.
Could not handle it, got flipped out.
This is what being in business is like, folks.
Okay, so yeah, so that's that.
So we'll put that back in.
Look at that.
That's what we were running electricity through.
And the thing's still booted, that's what's crazy.
One of these that's broken was on the ground.
So how that board ever even booted, I'll never know.
It must really be a nice design.
So just complete corrosion, look at that crap.
So that's what it looks like.
That's what it should look like.
God, holy moly.
Now folks, do I ever tell you to waste money?
Do I ever tell you to do crap just because you can?
Like put all new displays in or put all new boards?
No, I never tell you that.
I always say work with what you got,
try to do it the cheap way.
Cause that's just how I got into the hobby
and that's what I enjoy about it.
Can't crimp, you can't skimp on this.
You got to do, go ahead and spend the money on this.
So check your connectors.
It'll cause you all kinds of problems.
You just won't enjoy the game as much
if these connectors aren't good.
This is the number one thing
that's gonna screw up your game.
So, and think about it,
I never tell you really to change the pins.
A lot of people say change the pins too.
The pins usually you can get away with,
but these right here, you see how they get so corroded.
The pins that are corroded on the board
that you swapped out are, you know, they're gone
because they were on that board.
So you've got brand new pins on the other side already.
So if you just crimp these in, new ones,
it just saves you all kinds of trouble.
Well worth the money and they're not that expensive anyway.
I think these, we buy them in bulk
and I think these are like 10 cents
or something like that, or maybe even less.
It takes a little bit of trouble going through.
The way I do it is I take a little screwdriver
and I bend the little tab back.
So whenever it slides into that housing,
I don't know if we can see the back, yeah.
See that little pin there?
That keeps it from coming back out.
So you slide it in and it locks in place.
So you have to put a little screwdriver in there
to push that down so that it can pull out.
And then whenever it pulls out, you cut the end off.
So that's the end cut off, right?
So you cut the end off the wire
and then you strip the end of the wire,
which is what that is.
And then you put the newly stripped wire inside here
and you slide it up to where the wire
is under this first piece.
And then the insulation is under the second piece.
Now I've got some crimpers that I use to do this with.
And you just kind of hold the,
you squeeze down on this with the crimper
and it holds it in place.
And then you slide the wire into the crimper
and then pull it in as a ratcheting set of crimpers.
And it gives you a nice, perfect crimp each time.
If you're interested in getting
a pair of those ratcheting crimpers,
go look on our website.
We sell them on there on Amazon.
It's lionsarcade.com.
The link is down below.
And there is a parts page linked at the top of our website
that shows a whole bunch of parts
that we use to fix things.
These connectors are a little bit harder to find.
I don't think we have a link to them on there.
We might, but here's your part number.
There's two different sizes.
This particular size is 0.100.
So it's 1 10th of an inch spacing between each wire.
That's how they denote that.
And it's part number 08500114,
which is a Molex part number.
Get you some.
But check out our website.
Now, if you go on our website,
on any of those links that take you to Amazon,
it gives us a tip.
Even if you just go look at the thing,
you don't even have to buy it.
Cause it's like an advertisement.
And if you do buy something,
we get a commission on it too.
So if you go on there and maybe you look at our crimpers
and you don't like our crimpers,
if you like your crimpers better,
you'd rather get some other kind of crimpers.
But while you're there,
you decide, hey, let me buy some Windex.
I'm about out of this commercial line Windex.
And then you go search for Windex on Amazon.
Guess what?
It gives us a commission on that too.
So we appreciate everybody that's done that.
Some of you out there have even bookmarked
our link down below.
And every time you go to Amazon, you use that link.
Therefore, everything that you buy on Amazon,
we get a commission from.
We appreciate everybody that's done that.
That's very nice of you.
Okay.
Next thing I'm gonna do is I'm actually gonna pull out
the power supply that we were just looking at
with that one stray wire.
Because some of the pins look kind of bent up
and they've already done the solenoid board.
They've got a new MPU.
And then we were having a problem with the lights.
So I'm gonna pull out that power supply.
That very well could be where the problem is.
And that would be something we can service for the guy.
And then that pretty much everything
will be serviced at that point
with the exception of the displays and the lamp board.
So let me pull that out and we'll see what's up with it.
All right.
So here is the transformer and rectifier,
the power supply of this sucker.
And I thought for sure we'd have a blown fuse.
We do not.
Now they're all kind of oxidized and stuff.
So I need to clean up these holders a little bit.
But this one pin's kind of bent.
I didn't like that.
And what that usually means, now ironically too,
it looks like the bridge rectifier that runs the,
this is the fuse and the test point
that runs the switched illumination has been replaced.
And that's the only thing that's ever been replaced on it.
But what usually is a problem on these
is you have bad solder on these pins on the back.
So I looked at that and actually,
again, this is the bridge rectifier
that runs the switched illumination.
It's this trace here.
And those two pins right there
are your switched illumination.
And they're actually still fine.
So I don't know.
Yeah, I'm not sure if that has anything to do
with what we're seeing here.
I'm gonna follow it.
So it's the second pin there.
That may be that one that branches out, whatever.
Whatever, we're gonna re-solder all those, clean them up.
I'm gonna clean up these fuse holders.
I tested the three bridge rectifiers, they're fine.
So, you know, of course you should test this too
while it's turned on so you can check the voltages.
And we'll get to that.
But obviously those connectors were a problem.
I looked on the schematics,
those connectors that we did, the bottom two
have nothing to do with the lamps.
The lamps are up in the middle of that big connector.
And the displays are at the bottom of that big connector,
which would be the closest to the rot area of the board.
And the displays were working fine.
So, you know, it could be a couple of those pins are bad.
They look pretty good to me.
And if you lose like one of those,
usually you would just get some of the lamps working
and some not, whatever.
So we're gonna keep tracking it down.
We'll check voltages next.
And there may just be a fuse blown somewhere else.
I don't think there is on the switched illumination though.
It could be bad solder on the lamp board,
but we'll track it all down.
But anyway, this is, you know, the heart of the machine
or the, I guess this would be the heart
if the CPU is the brain.
This is what keeps her beaten folks.
So we gotta make sure that the power supply is good.
So all this one really needs is these re-soldered.
Oh, I didn't show you the cracked joints.
So those two that we're concerned with look fine.
But wait a minute, there's one right there.
Look, it's not fine.
Now that I'm closer, I can see it.
See the little line around the pin?
That has cracked loose from the board.
And this is the connector.
The big one is the one that goes to the back box.
But you know, this one up here looks good,
at least from here.
Maybe it's cracked loose too.
I don't know.
I do see a little ring around the pin down there.
So it could be these two joints are cracked.
But if you look at the end, some of them definitely are.
Like this one definitely is.
That one definitely is.
See how it's almost square around it?
That one definitely is.
So those voltages might still be there,
but maybe they're reduced or they go in and out.
Look how bad this one is.
That one's definitely not doing what it do.
And this one.
So when you go to solder these,
see how these are all dull looking?
And it's basically there's dust and dirt all over these.
So what I do is I take a wire brush
and I scrape the crap out of them.
And that basically dusts them off,
gets all of the gunk off of them,
gets them nice and shiny again.
And then whenever you go to flow solder on them,
it'll flow on it nicely.
So I'm gonna reflow all of those,
add a little bit of solder to each one of those posts,
every single one of them, even the ones that look fine.
And that will get the power nice and solid, I believe.
So let me do that.
And then I think we're gonna upgrade the transformer too.
We'll show you that in a second.
All right, I re-soldered them all.
I straightened up the couple that were bent.
The pins all look fine.
Every one of the fuses was the correct fuse,
believe it or not.
I cleaned up the holders a little bit,
although you can't really tell it too much on this one.
If there are these ones that are brass,
they hold up pretty good.
But if there are these ones that are silver-plated
or whatever, they get oxidized.
I cleaned it up and I measured continuity
from one side to the other.
They're all making good continuity.
Even if the fuse is good,
you have to make sure that the holder's good.
The holders on these rectifier boards
are usually pretty good.
They just need to be squeezed a little tighter or something.
I did swap the one fuse.
This was the one that was in there.
This fuse was still fine,
but the resistance on it was a little high.
It was reading like two ohms resistance
when it should be almost a dead short.
And if you look, it's got this red paint on the end.
And it looks like that red paint
has kind of like got loose in there.
So it's just, it's old and I don't like it.
So I took it out.
So I put a new one in it.
So the last thing I want to do,
so I think all that's good, but we'll see.
The last thing I want to do is,
this thing is set up from the factory for 115 volts.
And back in the day,
the voltage was a little lower than it is now.
Where I live, the voltage is actually 125 volts.
It'll work like that,
but what happens is since the voltage
coming into the transformer
is higher than the transformer thinks, is set up for,
the voltage out of the transformer
is higher than the transformer thinks.
And then the voltage out of the rectifier board
is higher than it's set up for,
than it's supposed to be for.
And then the voltage into your solenoid driver board
is higher coming in and higher going out
and blah, blah, blah, blah, blah.
Now it'll run like that,
but it's real easy to lower those voltages a little bit.
So instead of having everything over-voltaged a little bit,
we can lower it where it gets it back
to about where it needs to be.
So on these, there's a little diagram
that shows this in the back box.
Pins one and three, so this is all your inputs.
Pins one and three are tied together.
And that is one side of your 120 or 115 line.
If nine and 11 are tied together,
you put the yellow lead there
and that's set up for 115 volts coming in out of the wall.
If you disconnect these two
and connect these two instead, five and seven,
and put this yellow wire on them,
that sets it up for 120 volts coming out of the wall.
Well, we've got like 125, right?
But almost everywhere has 120 now.
So I'm gonna move this over to here.
That'll make this understand
that it's getting a little more power out of the wall.
It'll lower all the voltages on this.
It'll lower all the voltages on the solenoid driver board.
It'll lower the voltage getting to the MPU,
et cetera, et cetera, et cetera.
So that's what we're gonna do next.
So here's what I'm talking about.
This is for 220 or 240.
We don't have that in the United States.
This is for 115 or 120, okay?
Tie lugs one and three together,
put the heavy red lead there.
So that's like that on both of them, 115 or 120.
And then it was set up like this.
For 115 volt, tie lugs nine and 11 together,
put heavy yellow lead on lug nine.
So we have changed it now to this.
For 120 volt, tie lugs five and seven together,
put heavy yellow lead on lug five.
So we've done that and took those apart.
You can probably leave those together,
but I took them apart.
So yeah, that'll just make it where the voltage
coming up here is a little lower, et cetera, et cetera.
All right, so I'm gonna turn it on.
Let's see if she'll boot up
and then we're gonna measure the power supply.
Okay, that time I saw the back box.
I mean, the little LED that says Bali
on the MPU that we looked at.
It does flash seven times.
So that's the same as the regular startup.
And also you can see that we've got some lamps,
controlled lamps working now.
Looks like most of them are burnout,
but some of them are working.
So it must, the concept of controlled lamps must work.
Okay, let's see if I can check any of these
without getting electro killed.
Since y'all are right in the way.
You're right here, you're cramping me.
Move over just a little bit.
It's all right, you'll be all right.
Don't worry about it.
I'll move it over where you can see it.
There you go.
All right, so you'll have to watch from there and tell me.
That's pin one, 5.7 volts.
That's the computer controlled lamps.
So it's working.
Pin two, 242 volts.
That is the display voltage.
The way it gets turned into the display voltage
is really high right now.
Pin three, that's the 12 volt
that gets rectified down to five volt.
You see now why I wanted to lower the transformer down?
Because the voltages are all high as crap.
They would even be higher if we hadn't done that.
And then test 0.5, 44 volts.
That's our solenoid voltage.
So let's do AC.
This will tell us our general illumination voltage, 6.78.
All those look about right to me.
All right, so I'm also going to test real quick though,
the display voltages.
Because yeah, it was 240,
but it gets changed lower up here
on the solenoid driver board.
So I'm going to try to test this
without electro-killing myself.
About got me.
Let's see what this says.
What's that number?
244, so that's the voltage coming in, hopefully.
And then, this is the voltage going out.
197, all right, that's about right.
A little high.
It's supposed to be 190.
They'll run a little better if you run them at like 180,
because they'll last longer.
It has this old pot on it.
Let me get a screwdriver so we can adjust it.
I'm getting a screwdriver so we can adjust it.
I've about got it picked out.
I found the screwdriver so we can adjust it.
Now I'm going to give you some very valuable information.
I'm about to tell you which way to turn the damn screw
because I don't know and I'm about to find out.
So I would think lefty, loosey, righty, tighty.
That's what I would think.
So I turned it just slightly to the left.
Let's see what that did.
Of course, that was the wrong way.
It's inevitable, people.
No matter which way you turn it,
it would have been the wrong way.
Oh, wait a minute.
Maybe I didn't turn it far enough.
Okay, so I severely turned it this time.
Let's see if I severely raised it.
No, okay, so 174, that's a little too low.
So yeah, you turn it to the left to lower it,
but you have to get pretty,
you got to put the wolf on it
for all you Ice Cube fans out there.
I'd like it to be 180.
180, that's what I would like and I got my wish.
Okay, so let's see how the displays look.
They look good.
You can't tell, it looks like they're flickering.
That's a trick of the camera,
not being as great as my human eye.
Yeah, yeah, to my naked eye,
those things are steady and smooth
because my brain is stitching together,
you know, the frequency, the 15,000 refresh rate
or whatever the hell it is.
And I can see it just fine.
But the camera only does 60 frames a second,
much inferior to the human eye.
And so some of those frames it's taking
right at exactly the time that the displays are off.
So it looks like it's flickering.
So out of those 60 frames that it's taking in a second,
maybe 10 of them are just blank.
If you pause the video
and then move through one frame at a time, you'll see that.
Okay, so actually they look really good here in person.
They'll look fine up to like 200 volts.
You won't be able to tell what the voltage is going to them.
And they'll run as low as like 170,
but you might get problems where they don't look that good.
They start flickering a little bit
like it looks like it's doing on the camera right now.
If you, you want them about 180 though.
The book says 190, but they figured out
if you lower them a little bit,
it makes them last a little longer.
If you run them at 200, 210, 220 for too long,
they'll be slightly brighter.
They're bright as hell though.
You don't need them any brighter.
They'll be slightly brighter,
but they will literally burn up.
You will start seeing little pinholes
that have burnt in the inside of the glass
and they just look like crap after a while.
It wasn't one of these already like that a little bit.
No, they've replaced these with some different ones
from other machines at some point
cause they look real clean.
Okay, so we got that.
So let's button this up
and then see if it'll kick the ball out.
And if it is doing that thing
where the right kicker goes crazy
or if the Joey or somebody got confused.
I'll tell you my opinion.
There's no way in hell this one's doing that
because I don't think they ever had it running.
Those pins were so bad,
there's no way this thing was ever up and running
in my opinion.
I could be wrong.
And since the gentleman brought us five,
they may have got confused
and maybe the Matahari is doing that or something.
These three are very similar,
Matahari, Nugent, Stern,
but it's exactly like a Bally
and Evil Knievel.
They've got the same setup,
same boards, everything.
So my guess is that this one doesn't have that problem.
One of those two does
because I don't think this one was ever running.
Ball is in the out hole.
I don't know if it's set on free play
because I don't know if they were able to.
You might do it with a dip switch or something though.
So let's see.
No free play.
Also notice that the controlled lamps have died again.
I wonder if it blew that fuse
that was halfway blue before.
Okay.
It's accepting a credit
on one of the coin switches.
All right, I like that.
And the solenoids are working
because it's ringing the chimes,
although I think they're screwed up too.
Boom.
That's how we want it.
Now, the reason I was giving it credits
and you couldn't tell
is because there is a display right here
that says credits,
that they probably got turned off.
We don't even know
that that board is set up for Evil Knievel.
It might be set up for Mata Hari or something.
Flipper works.
Since it landed on that switch
and then kicked the ball out,
damn, it still could be set up for Mata Hari.
It's probably set up for the right one, folks.
But you know what I mean?
Like, it knew that that switch
was something that you hold for a second
and then kick out.
If you hit this,
and then it would,
oh, you know,
the guy was saying that this is always kicking.
So that could have been where it was set up wrong,
but I'm just spitballing here, folks.
Got some display issues going on.
But we do seem to have all the switches working.
Ballet pinball, ladies and gentlemen.
Ballet, any questions?
Any questions?
That one ain't working.
Boy, they spin, don't they?
Ooh, they got some good spinners.
This is what's called a dead bumper.
That's not a pop bumper.
You just hit that skirt and it hits a switch.
Those are often misadjusted, though.
So these two aren't working.
That spinner's not working.
All those are working.
Is there a standup switch anywhere?
Nope.
These are all working.
Let's see what goes on with our drop targets.
Ooh, yeah.
How sweet it is.
Okay.
I'm not seeing any problem with that,
but let's do the thing I was talking about earlier.
Sometimes if you really get in the pop bumpers,
that will do it.
Am I hearing something else?
No.
Okay, so we'll play it for just a second,
and then we'll be able to see better.
Actually playing it, we'll notice that things are popping.
I'm gonna show you something else.
See the rust on the pinball?
See that?
When you feel that, it's like sandpaper, okay?
That's why this is so bad,
because that sandpaper, you're rubbing that
all over that nonstop, and it tears up the play field.
So one of the best things you can do
to have your older pinballs like this not get screwed up
is throw away the balls whenever they get screwed up.
These pinballs are like $2,
and they'll last a couple of years.
Like, this is probably a 20, 30-year-old pinball
that has that rust on it.
So I'm gonna throw it in the trash
and go get a brand new one
so that we don't make it any worse.
It's already pretty bad, but why keep doing it, man?
One of the best things you can spend a couple bucks on.
A brand new pinball.
So let's see if the kicker ever fires when it shouldn't.
There we go.
It did, didn't it?
Didn't I just see the bottom pop bumper
and the right kicker go crazy?
I'll do it again.
Did it do it?
I'm gonna have to re-watch the video.
Yeah, I might be tripping.
So I'm gonna re-watch that part of the video
from just a second ago
and see if that did kick when the ball was up there.
Okay, you saw it.
It did not kick.
It just made so much noise with this
kicking over and over again
that it sounded like it did, but these never moved.
And you can clearly see them moving
in the other parts of the video.
It sticks out so far that you can easily see it.
So yeah, so that's not a thing.
It doesn't appear.
And I'm pretty sure on those ones that have that issue,
I think it was the left one that kicks all the time.
But that is an issue.
So we may run into it on one of these other ones.
So we've just got a few more things to do on it,
but it's not enough that I can do in like 10 minutes.
Cause look, we've got, like that shouldn't even be,
it's supposed to say 152.370.
So it's got problems.
So we're gonna have to mess with that.
We need to mess with all of the lamps.
It's just got a little bit more to do
just to make sure everything's working properly.
We need to adjust those coils that are tripping.
We've got the two dead pop bumpers that aren't working.
We've got the left spinner that isn't working.
So we've got a nice little checklist
that we need to go through and fix on it.
And so I think we'll do another video showcasing that
just because Evil Can Evil is such a cool game.
So I hope you appreciate it.
I hope you enjoyed the video, not appreciate it,
but I hope you enjoyed the video.
I hope you got something out of it.
And we will see you next time
where we'll finish this sucker up
and then it'll be on to the Ted Nugent.
And we still have to finish up the eight ball champ.
I'm waiting on a part for it and it's taking a while.
So we'll do another video on that as well.
So we've got plenty more pinball videos coming,
including.
Wow.
Oh no, that's not that one.
This is the one that goes.
I think I need to go take a rest.