A Most Unusual Repair - Thomas Johnson Antique Furniture Restoration

Thomas Johnson Antique Furniture Restoration
41 followers
12 Video Views·Aug 9, 2024
I'm Tom Johnson Thomas Johnson antique
furniture restoration in gorm Maine this
is a very nice table it's from the uh
postmodern Studio Furniture movement of
the
1980s uh built by a very well-known
artist Wendy marama
uh she's an artist Furniture maker and
educator out of California and uh it's
very interesting table it's got a lot of
different elements it it does open up as
a Cabinet as a functional
piece you know as you can see different
elements different shapes different
treatments to the
wood Gold Leaf Red Leaf florescent paint
but it's been damaged
down here to
see it's been damaged by an
animal and uh you can guess what kind of
animal damag it I'll give you a hint
it's not a dog or a
cat so that's what needs to be
repaired so what I want to do here is
I'm want to get this up
like this I want to get the broken
area into a a horizontal position and so
I I made a stand here off
camera
padded see if that will work for
me this seems really
secure now I want to see if I can uh jig
this up so that I can use a router to
give me a good surface so I have a piece
of plywood here with a hole cut out in
the center and uh I've cut some
2x4s and the plan is to uh secure these
to the bench over the repair area
here and this will provide a platform
for the router to uh run on
this leg has movement so I've got to
clamp this a little more securely
[Applause]
[Music]
[Music]
[Music]
I realized now I'm going to do this in
two stages I've been cutting the lower
part of the leg here uh and it's you
know it's nice and level even though you
need to go a little deeper there but uh
the upper part of the brake I can go a
lot shallower so I'm going to do this in
two or maybe even three
stages I finished up the first cut and
now I got to switch to a shorter router
bit I'm going to step this up uh even a
third time it'll really minimize the
amount of material I'm taking
away so I've been wondering this whole
time what kind of wood this was so I
contacted uh Wendy marama and she said
it was gelon which is something I had
not heard of it's a wood from Southeast
Asia uh very fine fine grain wood like
Basswood used a lot for carving and she
was kind enough to send me three pieces
[Music]
so what I'm going to do is glue one
layer at a time I'll glue the first
piece and then reroute it uh to make
sure I'm going to level with the second
level and then the next piece and so on
the next piece
okay this is dried for about 8 hours and
now I'm going to Route this new piece
down level with the next
step so I want to get this router bit
set
just slightly lower than my second step
there
[Music]
okay now I can glue down a next
piece okay now we uh do it again
[Music]
okay I can remove my whole uh router
setup now I won't be using it anymore
okay now I got to shape this leg um well
I'm going to start with you know cutting
this flush with the foot here and and
then locating the foot
[Music]
[Music]
itself now this uh leg was originally
band on I can't do that but you know
I've got a
a surface here a facet of this leg I can
follow down and the same on this side
there's a facet here and I I'm just
going to have to try to saw at that same
angle uh down
to yeah where this area in here it's so
hard to
say well let's try
it now I've got to make sure I
don't cut into my foot
here foots
probably like
this so I just want to keep away from
there there's a lot of guess workor here
I'm going to
air towards leaving too much wood
there so I'm looking at this facet I'm
just going to try
to keep this solid to the same
angle okay this is good I was a little
too cautious which is good now I can see
more clearly how I've got to follow this
facet down to about this point here here
[Music]
[Music]
[Music]
[Laughter]
okay so far so
good but don't worry I still got plenty
of chances to screw
up okay I've cut this side now and I
think get you see that this
facet right here goes all the way
down to the bottom of the foot so if I
can follow this one
here straight down to there that'll be
good
[Music]
now I can draw a
line which will help
[Music]
[Music]
now it's still heavy here which is good
uh maybe I
can cut up and maintain this uh angle
right here
okay so now I'll
follow the next facet down I'm a little
bit unsure what's going to happen here
but uh I'll follow this down we'll see
what happens
[Music]
[Music]
so far so good I think so now I think
I'll follow this
facet down
[Music]
[Music]
starting to look like the leg
now all right I think I'm going to try
to Define this foot a little bit more at
this point
[Music]
maybe I'll go with this facet
[Laughter]
now and I've still got this little facet
[Music]
here I I think I'm going to switch to uh
a hand plane now see if I can bring
these in
[Laughter]
I can see I've got a high point here
[Music]
now I've still got some damage here I'm
going to fill that those in with a
water-based putty so I can wipe it off
and not sand
so this texture was made with a uh in
other words this leg was shaped with a
grinder with uh heavy duty sandpaper on
it now I'm not going to attempt to use a
grinder on this I'll just use a regular
Disc Sander and see if I can just
recreate that a little bit
[Music]
[Music]
okay now I'm going to sand with uh 220
you know even though it has tooling
marks it's uh it's still pretty
smooth I think the only way I can uh
really see what I've got here is to go
ahead and put some paint on it uh you
know start trying to mix these colors
anyway and uh I think then I'll really
able to see what my marks are
like that looks good
well it's hard to believe that the paint
right out of the bottle would would look
so good I think I just need to keep
applying let this dry and then apply
more of
it okay I've let this dry for an hour
I'm going to give it a another coat here
try to touch up some of
these little
spots for
is
I'm at the point now where I I don't
think I can get it any better this maybe
it I think the next step would be to uh
stand this up and have a look at
it yeah it's not bad um I think I need
to impove improve this area at least
attempt to improve this area here I've
got a little cut out there that I missed
that's what's good about putting it you
know back into position I'm looking at
it the correct way now
I think I could fool with this uh
endlessly and never really make it
substantially better than it is
now okay I've got a u few touchups to do
here and there just uh wear marks on
some of these
Corners now let that
dry and then uh buff it a little bit
so when I came in this morning and
looked at my repair area there it looked
great and then of course when I start
looking at it closely I can see the
areas where I was having trouble
splending it in the reality is if you
keep looking at this this close you're
never going to be satisfied with it at a
certain point it's important to set it
on the floor stand back and see what it
looks
like so there you have it a really nice
I guess a hall table of postmodern
Studio Furniture what a great example
it's uh from 1990 by Wendy marama and uh
obviously the the leg had been damaged
and uh sure enough on the floor here
standing here looking standing back
looking at it it looks fine I'm going to
have to resist the temptation to quit uh
to keep fooling with it while it's here
in the shop I'll be sweating bullets to
my brother Greg sees this video he's the
only one that's really authorized to
work on postmodern furniture and um I
hope he agrees I think it looks pretty
good
I hope you like the video and if you did
Please Subscribe and like and be sure to
hit the Bell icon so that you'll be
notified when I put out a new
video I'm Tom Johnson Thomas Johnson
antique furniture restoration in gorm
main this is a nice uh late Victorian
antique platform rocker uh I say late uh
just because of the general style of it
and it's made of oak I believe and it's
got some nice little uh insided uh
carving here that also makes me think
that
so it's looks very very dark and kind of
dingy I don't not sure what's going on
with the Finish or the wood here the
upholstery is not bad it's got an area
where a dog chewed and also it doesn't
always seem to ride Square on the
platform base so I need to see if
there's anything I can do about
that so the first thing I'm going to do
is tape off the upholstery which seems
to be in good
shape so I'll just tape this off with
the conventional tape and
plastic I like to test it yeah it's not
really pulling anything up
so the
platform seems slightly at an angle but
there's a lot of damage here which kind
of
indicates that at times anyway it's been
much further off grinding away
wood so I'm not
sure exactly what if anything I can do
about that but I'm going to take this
space off anyway so I can uh repair the
damage and I think I'll reverse these
Springs uh see if that does
it for this damage I think I should
splice in new
wood this slightly damaged area maybe
I'll use a little uh epoxy putty or
something before I sand that I think for
this corner I may just use epoxy putty
to this area where the dog chewed I
think I'm going to uh use putty also I
don't want to cut away too much wood
oh
[Music]
[Applause]
n
[Music]
[Music]
those of you who watched my uh videos
know that I use hide glue uh for
antiques and that's really important
when you're regluing the joints but for
a repair like this a regular yellow glue
is fine now we can turn our attention
towards the U chewed up area here and
it's always tough to know whether to put
new wood in or not uh but I'm going to
use epoxy putty here uh if I wanted to
replace this with new wood I think it's
a little too drastic for what's going on
here and also I can't take the chair
apart so we'll go with the epoxy putty
epoxy putty when fully hardened can be
very difficult to sand and and carve so
that's why I set the timer uh between 5
and 10 minutes or so as this begins to
harden but still isn't totally hard I
want to Chisel it some and shape it
close to the final
shape still a little soft I I'll hit the
timer again for 2
minutes 2 minutes isn't up yet but I can
start playing with it a little bit here
and interestingly enough you can also
use uh water scotchbrite pad and some
water will smooth this out
too oh I turned the chair on the side
now I've got a better angle at this I
couldn't get to it before
let try it
you can dip your blade in water
also and that can help with the
cutting all right it's getting too hard
now so you know you just get it as close
as you can sometimes you can get it all
the way uh but at this point I'll let it
Harden but I've certainly minimized the
sanding nasty little breakage and
chipping along this
Edge for
all right the uh putty is fully hardened
now so I can uh sand
you know as is often the case uh this
chewed area was so bad but when you so I
decided to putty it but when you sand
out the putty you see how little wood
actually was
missing okay now we can tackle this
repair
so I think
uh before uh I clean this chair I think
I should assemble it and see if I can
solve that problem of it being uh
skewed so right away I noticed that
these Springs are the braces are
skewed I was thinking that the the
spring was rigid and maybe I could move
this but then I started this twisting it
goes anywhere you want it to
go so it doesn't want to stay these
brackets don't want to stay lined
up no matter what um I think the first
thing I'll do is is cover the spring
with WD40 and see if maybe then it'll
stay in the position it's supposed to
[Music]
this actually it helped in other words
it wants to spring
back but not completely
maybe I'll keep working it a little bit
and spraying it again cuz it is it is
springing now if I go that way it
Springs back to the correct position if
I go this way it doesn't want to spring
back I'm going to take a wire brush
and try
to just work it in as best I can I'll do
this on the outside and the
inside trying to work the WD40 into more
surfaces so that treatment really helped
a lot but they're not perfect it's funny
you go one way and they Spring right
back where they're supposed to be if you
go the other way they don't spring
back
so I'm going to do something that I had
in mind all along which is to add some
uh small pieces of wood to the underside
of this chair that will act as a guide
for the upper
part so I was making these uh guide
blocks and I had what I thought was the
most clever
idea I thought why not just since they
want to can't in One Direction why not
put them oppose each other so that they
you know hold each other in
place but I discovered I couldn't do
that no matter which way I turn
it they're still caned in the same
direction I've tried every combination I
can think of which there aren't too many
really and I can't make them
oppose each
other so it wasn't such a clever idea
after all or maybe it was a clever idea
but in
fact it can't
work so I guess I'll install my guide
blocks after
all I'm going to use old screws and then
I'll stain these later
[Applause]
yeah I think my uh extra blocks here
we're going to keep that keep this thing
on track
now working on his chair I saw no
indication that it ever been refinished
you I don't see anything on the
undersides that would indicate that and
yet it doesn't seem to have any finish
on it at all it's very very dry and
appears to be uh
dirty so I'm going to clean it uh very
gently I think I'm going to use Murphy's
Oil Soap
[Music]
if a piece has a hard finish on it I
tend to be a little more aggressive this
I'm not sure what's going to happen so
I'll do a little experiment underneath
that seems pretty
nice so I'm going to go ahead and clean
the whole thing
I'm just noticing for the first time
that uh these are bamboo turnings at
least these are
you know the more I look at this the
more I think maybe it didn't have a lot
of finish on it maybe it's supposed to
uh invoke some sort of uh rustic
style it's got this real uh stick
architecture thing going
on so I'm going to stain uh my repair
area and then let it dry
overnight I'm going to stain this with
some uh Walnut Dy stain it's a oil
soluble Dy stain from lockwoods
now you can really see where the putty
is and how little there
is of course that's a pretty big piece
of putty there that
corner let me go over this again after
it drops
and I can't forget about my patch and
the new pieces
[Music]
so I may go around again you know as
this dries and then add a little more
especially on those new pieces
underneath and uh other than that let it
dry
overnight great everything's dried well
uh my touch-ups are still a little bit
of light from that uh oil soluble stain
I'm going to go with my uh regular
alcohol dye stains and darken it up a
bit
this side grain and of course the putty
are particularly light
so now I'm going to give the chair a
coat of uh Watco Danish oil and in fact
I'm going to use the uh Watco that has a
walnut in it this is called a medium
Walnut and that will help uh emphasize
the beautiful color I see here and sort
of act as a scratch cover too kind of
taking care of minor defects
this is that chewed up corner with all
the putty
all
all right I'm going to let this dry
overnight
wow this looks good definitely sealed
the wood a bit there's definitely not
too much finish on here I like the way
it
looks I do want to give it one more
layer of protection I want to do some
wax and I'm going to stick with the uh
Watco system and use their satin wax
dark
okay let's try it
[Music]
out well that looks great so far of
course uh you're supposed to let it dry
for 10 minutes and buff it but I think
it's going to work fine I'll go ahead
and do the whole chair
so I'm using a four o steel wool uh
number one it holds holds a lot of the
wax just fine for application but I'm
also trying to possibly uh smooth the
surface a bit this chair is is is a
little on the rough side and you know
and I'm working the wax down into the
grain hoping to to provide you know some
protection for this chair and make it so
that it won't collect so much dirt and
dust in the
future okay I'm going to let this
wax soak in for about 10 minutes and
then uh wipe it
down all right uh 10 minutes is gone by
I'm just going to wipe it down
okay I've wiped this down but you know I
had left it so wet letting the wax soak
in that now Begins the real uh drying
time so I'll let this dry for you know
few hours or something and then I'll
come back and and then buff it off again
okay I've let this dry over
lunch I'll buff it down with a clean Rag
and then I'll take the plastic off the
upholstery
the tape worked well on the upholstery
only these places in the where it
was already damaged did it pull up a few
extra fibers I'll just sort of trim
those off
well there we go it's a very nice
Victorian aesthetic Movement platform
rocker uh came in it looked it was
really rough didn't look rough it was
rough I was very unsure about what the
original finish might have been and of
course it had a few problems in that the
uh the The Rocker was was misaligned on
the platform I think because of the
springs and I repaired that damage and
then added some guides so it will stay
in the proper
position this this front corner was
chewed by a dog repaired that and then
cleaned it and boiled it I think it
looks pretty
good for
