Ruined to Remarkable! Antique Mirror Restoration

Thomas Johnson Antique Furniture Restoration
41 followers
353 Video Views·Apr 3, 2026
Tom Johnson of Thomas Johnson Antique Furniture Restoration in Gorham, Maine . Tom has been restoring furniture professionally since 1979. Visit our website at http://www.thomasjohnsonrestoration.com, call us at (207) 222-2266, or write us at [email protected]. And for those on the west coast looking for custom framing, be sure to check out Tom's daughter's shop, https://www.emcollier.com (@emcollierframes on Instagram).
AI Generated·May contain errors
I'm Tom Johnson, Thomas Johnson Antique Furniture Restoration in Gorham, Maine. I really like this
video you're about to see for a number of reasons. First of all, I never knew anything about these
cording mirrors until this one landed on my bench. And it was really on the brink of being lost.
I think many people would consider it beyond repair. I mean, after all, the glass itself was
broken. One part of this project, I was able to save the back, which had paper glued down to it,
and there was an important note on that paper. Even now, I still wonder if there wasn't something
I could have done better, but I'm just not sure. But hey, if you enjoy this video,
please hit like, hit subscribe, share it. I really appreciate it. This is an antique
cording mirror, or should I say looking glass. As you can see, it's a wooden frame
with space for colored glass and a nice mirror. And the glass is decorated also.
Now you can see it's in tough shape. I have a little conflicting information about these
looking glasses. Online, I found an article from Hunt Magazine where a curator from Winterthur
Museum says these mirrors are 18th century mirrors and that they were made in Scandinavia.
But there's a newspaper clipping on the back here that says they were 19th century and made in China.
They both may be correct, but here's a clue about this particular looking glass.
This glass was Mrs. Lucy Shepardson, something Ebenezer Smith's second wife. She was born in 1740
and died in 1808. The first thing I need to do is see if I can get this paper backing
off the frame. It looks pretty well attached along this side, and of course we have no idea
what adhesive was used. I'm going to experiment on this side, maybe in this area here.
I want to see what happens if I just try putting a little water in there. I think it seems to be
loosening up a bit. Maybe I'll try a little bit more. Here's a place that's really down.
Okay, I've let that water sit for a few minutes. I've also bought this product called Laponite.
It's a synthetic clay. I know it's used in paper conservation to remove adhesives. I'm going to
really am not familiar with it. I'm going to mix a little up and see if it'll work
on these adhesives. See, it's already started to turn into a gel. I have no idea how much to mix
in to water. I was just guessing. I'm going to apply a little bit right here. We'll let that
dry and see what happens. It's cold in the shop today. Okay, let's see what we got going here.
So I was poking around this yesterday evening while it was still wet. The moisture loosens the
glue. I'm not sure though that it's worth it trying to figure out how to use the gel or even just
water. I'm thinking I might be better off just trying to mechanically separate this. In other
words, dry using knives. It seems to be popping off this area here, so that's good. Time to take
this wire off.
So now we can see why this corner is hanging together. It looks like it's been repaired
before. So I think someone took this paper off before, did some repair work, and put it back on
again. It's funny, maybe I don't need to take this off. Yeah, this joint is together. Okay, I've got
a bit of scraping to do here. Try a little vinegar and see if it helps. Yeah, helps a lot. Okay, I've
laid these strips on all these surfaces. This has been here for about five minutes. Before I glue
this together, I need to make sure that the glass will go back in there. Oh, I got to get rid of that
now. This joint, that's all the tenon we have there. And I discovered, of course, this little block was
in the box and it matches this one over here. And I'm going to use it for the same reason. This joint
definitely needs some extra support.
Just realized I want to do this face up.
So in this corner, I'll glue this little extra block on the back afterwards. There's also pieces,
we have these pieces here which I can also put on afterwards. I'll do that tomorrow,
let this dry overnight. That came together well. Alright, I've got some bits and pieces to glue on.
Oh, and I discovered a couple more. I was looking at the paper backing here and trying to figure
out if I could get this wood off of it, which I don't think I can. But I discovered additional
support blocks. There's a lot of glue there. There's a lot of glue under here. The paper's
already damaged. There's extra tape there. I've just got to try to get under there with a knife
and see if I can separate it. Luckily, I'm able to see in there and just cut the adhesive.
A little bit of paper damage there. It's somewhat inevitable. It's interesting because
these pieces seem a little too big. I may trim them down a bit. If you line them up to where it
originally was, I think right there, it intrudes upon the space in the back because these were
probably installed while the mirror and backing were still in there. So I think I'll put them,
I think I'll line up the bevels, put them on that way, and then trim this out afterwards.
Okay, I don't need to let this dry overnight. Later this afternoon, I'll take these clamps off,
turn it over, and glue the last bits on the front. This piece of glass has some paint missing,
and there's some of it. So that gives me an idea of where this was located.
Now let's figure out what we're going to do about the glass. My first thoughts were to glue this
back together, but it's pretty easy to see that it's a terrible joint. It's not, it's not a clean
break. It doesn't go back together. The first thing I'm going to do is clean this. I'm just
going to use a clean rag and some water. You can see the clear plastic tape that someone put on
here. I'm just going to keep peeling this back carefully with a razor blade. I don't want to
use any chemicals on the front of this. A lot of this here appears to be residue. The tape's
already gone. Here's a little bit. I put a little paint thinner on a rag. I think the paint thinner's
getting that residue off slowly, but that's good. Let's see what we can do to secure this in the
frame. That's about 5 16ths or 0.8 centimeters. Now check the thickness of the original glass.
That's about 1 16th or 0.16 centimeters. That leaves us a fair amount of room in that frame.
Let's see what we got here. I've got restoration glass, which is always good, and I do have some
antique glass, so let's see what we got. Now, none of these are wide enough. The restoration
glass is just a 16th also. I may go up to the barn. I have more antique glass in the barn,
but I have a suspicion that I'm not going to find anything big enough. You know, it's all just shards.
The restoration glass is fine. This is restoration glass from Benhimes in New Jersey.
I'm hoping that you can see in this reflection how wavy it is, and it also has defects.
Yeah, it actually fits. It fits in there nice and snugly. Okay, before I go any further, I want to
clean up and polish the frame. I'll start by cleaning the glass. I have just a water here
with just like literally a couple of drops of Windex in it. Okay, now I'm going to add just a
couple of drops of Murphy's oil soap into some water and gently clean the wood frame. Now I'm
going to wax the wood with a little bit of Billboy's polish. Okay, the wax has dried for
a half an hour. So my theory here, I've got the glass supported from the front by the piece of
glass I added, and now these strips of wood, I'm using little strips of satin wood inlay here
because they're so convenient, to then hold the mirror in place and hold the two broken pieces
together as best as possible. I'm going to put a couple of pieces of cardboard in here to hold it
in place. In fact, I think I'm going to put a piece of wax paper first, then cardboard. A second
piece of cardboard. Then I'm going to use some glazing points to hold it in. Okay, I got four
points in. Before I go any further, I've got to see how it's looking here. Oh yeah, it's good.
You can see that the old wooden back is still attached. It's quite a mess,
this paper. So I'm just going to try to smooth this a bit, looking for any, you know,
chunks that are a little loose and might want to come off. I've got some archival quality linen tape
here.
Seems to fit really well here in the back. That wooden back fits right into that space.
I'm even able to slip that wooden back behind those blocks, which is nice. Now I'm going to
put a little bead of hide glue under here, see if it'll stick down. This seems pretty good,
but we've got some problems where those blocks are and stuff. We'll see what happens. Boy, I've
been pressing this down and pressing it down, but it doesn't want to stick. I don't know if it's
something about the tape or what. I may just have to tack this down. Luckily, I've got these really
small ones. So I just put in four tacks. At least I know this isn't going to fall off. And then I've
cut some of the tape into strips, and that seems to be sticking a lot better than the glue did
anyway. All right, I feel like this paper's on there pretty well. That's good. Well, there you
have it, a cording mirror. Of course, they would have called it a looking glass. I think it's 18th
century because of the note that's on the back. It came to me literally in a box. My goal was to
just take it apart, put it back together, not really change anything. I think it looks pretty
good. I've got about eight hours in this job, and these are the tools I used.
