I Took a Risk Restoring This Regency Antique… Here’s What Happened

Thomas Johnson Antique Furniture Restoration
41 followers
528 Video Views·May 1, 2026
Tom Johnson of Thomas Johnson Antique Furniture Restoration in Gorham, Maine restores this handsome writing slope from the Regency period. Tom has been restoring furniture professionally since 1979. Visit our website at http://www.thomasjohnsonrestoration.com for t-shirts and bumper stickers. And for those on the east coast looking for custom framing, be sure to check out Tom's daughter's shop, https://www.emcollier.com (@emcollierframes on Instagram).
I'm Tom Johnson, Thomas Johnson Antique Furniture Restoration in Gorham, Maine,
and yeah, we're stocked up on t-shirts you can order from my website. This video demonstrates
how small objects are sometimes just as much work as large pieces of furniture.
The veneer repairs at times seemed like they were just never-ending. I thought about making the
video shorter, but then I thought, what could I leave out? I just decided to show the entire
process, every veneer repair. It's reality. It's showing doing real repair jobs for paying
customers in an actual furniture restoration shop, where you can't really cut any corners
or skip anything. It has to be done correctly, but you can't waste time doing it either.
Enjoy the video. Hit the like button. Subscribe. Share. I'd really appreciate it.
This is an antique writing slope. It's funny, I used to call them lap desks, but the term slope
makes a lot more sense. They weren't used in your lap necessarily. They were used on tabletops.
Open this up to provide a comfortable surface on which to write. They still make writing slopes
today, not as boxes, but just as a slant board. I'm calling this Regency period. It's rosewood
veneer and ebony and brass inlay, very characteristic of that period, the first few
decades of the 19th century. This scroll work on top might indicate that it's later in that period.
This box has missing and loose veneer and also missing brass inlay. There were a lot of pieces
in the box. These pieces clearly came from the box. Some of them are easily identifiable.
These pieces were inside the box, and these are components that make up the little compartments
found in writing slopes, but they don't go to this one. And this is something else altogether.
So, I want to remove these pieces, then glue down whatever's loose, and at the same time
be searching for where these pieces go. Boy, I'm not sure if these are going to come out of here.
This blade fits, but the handle's too small. I'm going to grind a larger screwdriver
with a better handle. You know what? I'm going to leave these here.
This all seems good, all this banding. I really would have liked to have gotten this off
in order to glue this strip and everything else. I'll just have to deal with it.
They used a toothing plane to put grooves in this. You see that on the back of some veneer.
I'm not positive it's a great idea, but it's neat to see. I'll be using hide glue on this job.
It's easy to use and compatible with the old glue.
These don't need to be cleaned perfectly, but you want to get the big chunks off.
I don't really need a piece of tape, but I want to remember where that was. Now that you can tell.
Oh yeah, I had noticed this too when I was working on this piece.
Well, that's good for today. I'll let this dry overnight. I was at the vet this morning.
I'm on my own. So now I can begin gluing down these pieces that came with it. I'll also find
some more loose spots along the way, but I need to determine exactly what veneer I'm going to use
for my new pieces. Okay, I've got quite a bit of different types of rosewood here.
Brazilian. I've marked these in the past when I've learned them. This is Honduran. This darker
portion reminds me of what I see in the box. Let's look in the other box. Okay, this one I've marked
East Indian. This other might be Honduras. Some antique rosewood must have come off of my piece.
This one I marked Brazilian. It doesn't look anything like this picture of Brazilian in the
article. Here's some other rosewood I had that maybe this is Brazilian. And of course you have
tulip wood. I also have in here ebony, African blackwood. So here's a piece from the box itself.
And this piece is actually a little dark. Most of the veneer on the box is lighter,
but that's the grain. It's easy to eliminate some right off the bat.
I like this. This is what I've marked as Honduran. If I could find that straighter grain pattern in
some of this. Now this is most likely East Indian, and I like that. And that's likely what they would
have used at that time. I'm kind of liking this, but I'm worried that it could be too dark.
This is where that piece goes. This is stuff I've chosen. Most of the veneers
kind of bleached out. It's all over the place really. Well I think this is going to be my veneer.
I will, in a lot of areas where it goes are dark, I might just for the heck of it
bleach a little bit of this and just see what it looks like. I hate bleaching wood. I don't even
know if it'll work on rosewood. We'll see. Now back to the box. I can see that that's a
kind of rounded over end. Oh wow, first try that one. I'll glue it later. Well I've got six pieces
here that make up banding like this. I think I better figure out where they go before I do
anything else. This one's really really dark, so it may go in the back there. I'm liking that one.
Isn't that perfect? Oh boy, the color's right. I noticed that this piece had rounded over corner
there and I like the way it fits. I think that's good. I think the finish and color difference
could be that this came off a long time ago and it's been inside the box for a while.
I'm liking the way that these fit too, and it doesn't seem like there's any other place for
them to go. I'm missing that piece.
Okay, I'll let this dry overnight. Okay, let's see what we got here.
The last remaining existing piece that I have to glue on is this one,
which is going to be difficult. The core of this wood is thin, three-eighths of an inch or
nine and a half milliliters. This is extending beyond it. This is the veneer that's on top.
So, you know, originally the edge was veneered first, then the top over, but that fits flush,
so I can make a little bit of a wider strip. And I got to work around these hinges too.
This is the fabric that you see on the other side of this board when you open the lid.
And I've cut some pieces of cardboard. I want to slip them in there between.
I don't want glue to get down underneath that fabric.
This will dry overnight, but I can get back to prepping that veneer that I bleached.
Okay, as you might expect, this bleached area looks pretty weird.
I'm going to sand it a bit with some 150 paper. Well, as I've sanded it, it looks better. Let's
see. Obviously, it doesn't look anything like that, but can we get from here to there? Let's
try something. Let's try some medium brown walnut dye stain. Of all the stains that I use, of all
the staining that I do in the shop, at minimum 75% of it is with this medium brown walnut ultra
stain. This small jar I keep handy has been thinned a minimum of 50%. I'm liking the looks
of that. I might even thin it out a little more. Yeah, it's a little too dark. That's good. Even
though the stain is going to need some adjustment, I've seen enough to know that I can work with this
bleached veneer, that I can get it to match. There's a lot of different colors going on anyway,
but this will work. It's just maybe a little bit less than 13 millimeters. I'll cut my strips at
14 millimeters. Who knows? This might just be crazy enough to work. Well, I've got to wait
until tomorrow to take the clamps off, and then we can start gluing this down. All right, let's
see what we got here. Oh yeah, that piece went down really well. Thank goodness.
My new veneer is not as thick as the old veneer, so I'll just double it up.
So
okay, we'll let this dry overnight. Okay, let's see what we got here.
Ah, there's a problem here. This didn't get pulled down to where it was supposed to be.
Lost a little piece right there. I should have done that when I glued it down the first time.
Well, this gives me a chance to start working on the brass. The first step is to clean all this
glue and dirt out of here. I think I'll use some hot water. I'm just going to stuff a rag in there
to try to keep water out of the lock. I'm not going to remove this lock and send it out for
repair. It seems to really be working.
So there's a couple things I got to do when I make the next one. Number one,
don't cut it. Don't mark it out the end of the piece of stock, but somewhere in the middle,
I've got to allow myself some brass to hang on to when I'm sawing it.
Secondly, I've got to figure out a better way to mark it. The up and down action of the saw
was disrupting the tape I had on here. So while I'm thinking about all that, I can get back to my
veneer repairs. So I've trimmed off the edges, and now I'm looking for any spaces that need to
be filled. For instance, I can see a little space behind that piece of veneer, and also I see a
space here, I think. I'll continue around, checking all my patches. And when the putty's dried, I'll
sand the putty and sand the new patches with a little 150, and then I'll pretty quickly switch
to 220. I've got to sand my new wood pretty well. Once again, I'm still working with 150
because the grain was raised so much from the bleach treatments. And then I've got to sand where
the new wood and the old wood meets. I've got to make sure that's smooth. And once I'm satisfied
with the 150, I'll use 220. When you're using 220, it's okay to go against the grain like this,
especially in these situations of banding. I'm sanding these surfaces also with 220,
but it doesn't seem to change the color much. I'll give it a little check here. Yeah, no,
it looks good. Areas like this, there's no new wood here, but I re-glued a bunch of this veneer
right here. And so I like to sand that too, just slightly. Just smooth the rough edges a little
bit and getting it ready to be polished. Now, here comes the scary part. I want to
stain my new veneer there. So I'm using Mohawk Ultra Stain, medium brown walnut, thinned out
two to one, maybe even more thinner. It's soluble with alcohol, so I have a towel and some alcohol
ready too. Let's try it. Let that dry for a bit. And after it dries and flashes off a bit,
you can go back in and add. Okay, it's dried. I want to put a coat of shellac on this whole piece
and see what the new piece looks like. Okay, this is the new piece right there. It looks good. It
needs a little more color, but I can put the Ultra Stain on over the shellac. Needs a little
bit more redness. Luckily, there's a tremendous amount of variation in the colors. I'm going to
go ahead and stain the rest of these patches and get a coat on this top edge. Although my stain
is not red enough, that's good. I can go back later and add a little red to it.
The worst thing that could happen is that your stain be too red. Now I'm waiting for the stain
to dry so I can put another coat of shellac on this top edge. I'll turn my attention to the lid
and again the escutcheon, and I want to show you my idea. So my idea was, if I could darken the
brass, maybe I could mark it. I went online and saw that you could darken brass with salt and
vinegar. So I mixed up a little salt and vinegar in here. It's only been a few hours and it does,
it is having an effect. The effect isn't great, but it made me think, I mean it's only been a
few hours, but it made me think that maybe this brass is lacquered or something because it is so
shiny. It's been around forever. I'm going to scrub down the piece of brass with lacquer thinner
to remove any coatiness on there. Well, bottom line is, if I can't mark this piece of brass
accurately, I can't really make it out of brass. And of course I was thinking brass was good. We
don't know what the escutcheon was. The escutcheon also could have been made out of either ebony
or rosewood. And I'm kind of leaning towards rosewood because my new rosewood will look,
you know, a little different than these and it'll show up. The ebony will just blend right
into this banding. So I think I'll go with rosewood. Maybe I'll run the grain vertically.
That'll give a little contrast. And I think instead of, I think I'll still use this veneer
which is too thin. I'll have to do two layers. But that gives me two chances to cut out that shape.
So off camera I took a single piece of veneer, tried it out in the saw, and sure enough it
didn't work because even though the veneer is taped, it split all out in the back.
I then took some scraps and realized that I needed three layers of veneer to get the right
thickness. And that gave me an idea. I'm going to laminate three pieces of veneer together
with the middle piece, the grain, running perpendicular.
And then I'm going to seal the whole thing with hide glue. And so hopefully then I'll have a
rigid piece of wood that I can actually saw successfully for this discussion. Okay let's
see what we got. I'm wearing gloves because the humidity is down to 26% and it's killing my hands.
This is still kind of damp so I'm going to put it up on points, let it dry a bit,
then I'm going to sand it and coat both sides with hide glue. Okay this is dried for a few hours.
It's nice and dry. I'm going to sand it smooth and then give it both sides a really good coat
of hide glue. So what I'm trying to do here is saturate this whole lamination of rosewood
so that it doesn't splinter when I cut it. While I've been struggling with the escutcheon,
I have been working on the box. All this banding around the top edge, I have put three coats of
shellac on, sanding well between coats. My goal is to fill the grain in on my new pieces of
rosewood veneer. My new pieces definitely need more red but I've been waiting to get the grain
filled in before I tone them with an aerosol toner. And now I'll give it a quick tape off.
I'm using Mohawk brown mahogany toner. Not bad but I won't know for sure until I put finish on the
entire area. So now while this is drying, time for a third attempt at the escutcheon.
So I've sanded both sides of my lamination. It's nice and smooth. I'll go ahead and make a transfer
just like I did before. Okay, so far so good. I've got to use maybe a small file,
some sandpaper, and see if I can just go around and make the micro adjustments to get it fit.
Okay, I think I'm ready to glue this down. I couldn't get the lock off so I'm just going to
stuff tape in there to keep glue from getting in there. Okay, let this dry overnight. Okay,
let's see what we've got. Let me get the glue off there. I'll be able to tell. It's not bad. I won't
know for sure until I sand this. It's a little bit above the surface. I thought I had it the
right thickness or better but I've got to sand that, bring that down a little bit. I can see
there's some gaps in places which is not surprising. I'll fill those. Before I go any
further, I need to get this piece of brass in here. It's easy to find the brass you need for
any project. Your local hardware store will have a display, artisan craftsman's supply,
or I get go to Grainger's and you can get any size of bar stock or flat stock that you need
and the right thickness too. I'm going to use five minute epoxy to secure that brass.
I'm ready to fill the little gaps over here and I'm going to fill that too. I'm going to
use epoxy putty. With epoxy putty, I can really minimize the amount of sanding I need to do
as long as I level it off before it hardens. I'm going to add a little bit of dry powder
stain to my epoxy putty. This is brown mahogany. I want to try to bring it close to that rosewood.
It's critical to watch your time. You don't want to let this stuff harden on you.
You can put water on your knife to help smooth it out. Hit the timer again. I want to keep an eye
on that. As it gets just to the right consistency, test it. That needs to be a little bit harder.
Another minute. Might still need another minute. It can be helpful to dip your chisel in water also
and then you can take a scotch brite pad and water and scrub away a lot of the excess.
So this piece of brass got shined up a little bit. Matches the new piece now.
I'm going to go over all this brass just slightly with some 4-0 steel wool.
Okay, brass is looking good. Now I'm going to cut this little brass just a keyhole into my
rosewood escutcheon here. Okay, I think I've got this escutcheon about as good as I can get it.
I'm anxious to give this the first coat of lubricite and see what it looks like.
Everything's looking good, but I'm going to brush shellac on this escutcheon I made.
It's too grainy. I need to build up the finish to even it out with the rest of the lid.
In the meantime, after I sprayed the aerosol color on my patches, I've applied two coats of
shellac with a brush. Now I'm going to sand that with 800 paper and then polish it with the
lubricite. Before I go any further, I want to put a new felt on the bottom. The final step will be
to go over this with the Gilbois wax. Well, there you have it. A nice Regency writing slope.
It came in a pretty rough shape, but it just needed some veneer repairs and
cleaned and polished up. I think it looks pretty good. I've got about 10 hours in this job.
I'm not including the time I spent trying to fabricate a brass escutcheon plate. I used the
bandsaw, the drill press, the scroll saw, and these hand tools. If you like my videos,
please like and share and feel free to repost them on other sites like Reddit or Facebook or Twitter.
