Careful Restoration of an Antique Settee - Thomas Johnson Antique Furniture Restoration

Thomas Johnson Antique Furniture Restoration
41 followers
220 Video Views·Oct 10, 2025
Tom Johnson of Thomas Johnson Antique Furniture Restoration in Gorham, Maine . Tom has been restoring furniture professionally since 1979. Visit our website at http://www.thomasjohnsonrestoration.com, call us at (207) 222-2266, or write us at [email protected]. And for those on the west coast looking for custom framing, be sure to check out Tom's daughter's shop, https://www.emcollier.com (@emcollierframes on Instagram).
I'm Tom Johnson, Thomas Johnson Antique Furniture Restoration in Gorham, Maine.
As you can see, I'm back at the bench repairing furniture, so stay tuned.
In the meantime, what I like about this upcoming video is it shows the difficulties in trying to
identify the age of a piece, the difficulties in trying to take a piece apart where some joints
are loose and some are not. And then I got to deal with worm-eating wood. I say worm-eating,
it's actually wood-boring beetles, which luckily we don't have to worry about anymore in our heated
and climate-controlled homes. And once again, I do extensive repairs and restoration without
stripping and sanding and refinishing. I love the carving on this piece. Throughout the video,
there's some great shots of the arms and the legs. So I hope you enjoy this video.
Please subscribe, like, share. I'd really appreciate it.
This is a really nice settee. As soon as I saw it, I could see that it was old.
Going through my books and studying these feet, these tri-fit feet, it really seems like it's
Queen Anne. And it could be a period piece from the mid-18th century. I'll know better when we
remove this upholstery and have a good look at it. The main reason it came in was to have the
back repaired. And you can see where it's got some worm damage, wood rot, there's a bunch of it all
over here. You can see it's been repaired plenty of times in the past. Here's some kind of putty
smeared over here. And you can see there's a nail straight through this joint in the past.
The back of it's pretty rough. There's all kinds of different things going on. Some weird breaks
here. And because it's loose, it's especially loose in this particular back joint, the only
way to really repair that is to remove the upholstery. And although the upholstery isn't bad,
it's a little bit lumpy and needs to be redone anyway. So I'll be able to repair the back,
re-glue the frame, and then we'll restore the finish some way. The settee's back from the
upholsterer who stripped off all the upholstery. Luckily the tacking strips aren't bad at all.
There's a few mysteries about this piece, still unresolved. Some of these elements look really old.
But looking at the inside of this, the wood is so smooth, it doesn't look that old. So I'm not sure.
But I need to take it apart and I think I'll start with the arms. I can see that there's
two screws here at the base of each arm support. I'll start by removing those.
Now these back joints are really loose, so we'll do those next.
This is about ready to come loose, but I feel a little resistance. I'm going to go check on the
stretcher on the other side.
So obviously I've got, you know, this end is broken and loose. This end's very loose.
This joint's a little loose. This one seems tight. I'm just going to tap and tap a little bit here
and there. Then I might try applying some heat to the center one. And I see no other pins or nails
or dowels or pegs or anything holding it together. So I'm going to assume it's glue. I've got so many
loose points here. I really want to take it apart, repair these, and then put it back together. So
let's see. I'm going to tap a little while, see if I can get something to happen.
This joint and this joint seem to have, you know, seem to have plenty of looseness. At least I see
movement there. This one seems really tight. I think I want to put some wedges in these joints
and then apply heat to this and hopefully a little tension and then some heat will bring that up.
This one's pretty much eaten up by bugs. Before we go any further, I better start
marking things. Even though all these pieces seem kind of obvious where they go, I'm going
to mark them anyway. Okay, this back splat seems tight. I'm going to leave it alone. This one's
loose. I'll wiggle it out and then I'll be able to take the side legs and supports off and have
this completely apart. It's amazing how this joint was holding on so well, yet it's totally wormy
and there's almost nothing there.
Something pulled this up right here. Yeah, this is a peg. I can see it in the back here too.
I think a peg goes all the way through this tenon. I'm just going to have to drill it out.
I'm going to start with a quarter inch bit, which is smaller than this. I'm going to try to, as best
I can, go right down the center of it. I actually got that bit pretty well down the center of that
peg. Now I'm going to move up to a 5 16ths bit. All right, so now it's all disassembled. The next
step will be to go over each piece and repair all these tenons. I'll start with this leg and side
support. We have a chunk that came out of there. It's really wormy. Unfortunately, the chunk is not
the entire piece, but we'll glue this into place and then we'll have to cut a new one.
It's so wormy. There's so little wood to wood contact. I think I'm going to use epoxy to glue
that back together. Okay, the next joint is this one. It's a tough one. It's completely eaten up
by worms. There's a tenon at the bottom of this back splat. It goes in here. I'll chisel out the
mortise and then I'm going to have to route out the back of this and add a piece of wood.
Okay, the back splat itself, as you can see from this one, it has a good joint.
There's no shoulder on the back. The tenon is part of the back.
I think I'll mark off exactly where I want to cut.
There's also a broken off mortise in this end of the crest rail. It's got a big old nail through
it. You've got to take the nail out just to clean out that mortise. All right, that's done. Now this
end, let's see, this this connects here so that's got to be chiseled out and I got to add wood there.
Now this piece I'm going to epoxy because there's just not enough good wood there
to use regular wood glue. I'm going to apply some of this relatively thin clear epoxy so it'll
soak into these pieces first. Then I'll add thickener and a little bit of color.
So now I've cut the space for the replacement tenons. You know, the whole time I've been
working on this I'm wondering what kind of wood it is. The exterior of it is the color of and
has the grain and everything of walnut. You'd swear it's walnut but when you cut into it it's
very very white wood. I don't know, maybe it's butternut. But anyway, I have a relatively light
colored piece of walnut here and I'm going to use walnut because that'll give me the color that I
want on the exterior. Okay, that piece glued on pretty well. There are some spots to fill but
there's a big piece of wood missing so I've got to put a new chunk on that. I have a piece of
walnut I'm going to use mostly because this is walnut color. The grain looks right. I'll flatten
this on the stationary belt sander. I realized as I was sanding this I didn't really need to take
off that much. There's a big void in here. I've got to chisel this out for a corresponding tenon
so most of that void will get filled by the tenon.
In fact, because of this gap and because of all the how this is still wormy, I'm going to use
epoxy putty to fill this gap and use the epoxy putty as an adhesive for this piece. Okay, I've
put this clamp on just for a couple of hours. Now I'm going to remove some excess wood. The
easiest part is the bandsaw. You know, I'm getting close on shaping this but I realized
this shape here has to match exactly this corresponding space where this gets glued on
so I'll finish shaping it after it's glued up. Now I'm going to lay out and cut a mortise for this
tenon. I no sooner started chiseling when my new piece of wood started to split on me so I glued
it back and I've decided to use a doweling jig to drill this out first. Then I'll go back with
a chisel and clean it up. All right, it was tough because the old wood is crumbly but I'll try it
on the tenon now. Not bad. It's a little loose side to side. It's good front to back. It's
loose side to side. I may add some veneer in there. All right, so the next step I'm going to
lay out the parts and start dry assembling it and adjusting and pairing all those tenons and
the joints that I redid. So what I'm doing, as you can see, is I'm going to put this whole back
together, the whole back of the settee, without glue. I'm trying each joint out, making sure
each joint works the way it needs to work. Okay, I've got this all together dry without glue.
Everything went together fine. Some of the joints are a little loose
so I have some veneer here. I might have to insert some veneer on some of these tenons
and I've got my glue heated up so I'll knock it apart and then go for it.
All right, that's pretty good. I was a little worried about the working time of the hide glue
but it's fine and that's one good thing about practicing assembling something without glue.
That went pretty smoothly. So we'll see what happens tomorrow. All right, I'm getting ready
to glue up the rest of the bench here. One thing I wanted to mention was, you know, when I first saw
this, I could tell all the carvings were very old. I'm no doubt they're 18th century. But when
the upholstery was removed, we could see the inside of these rails. The rails themselves were not old
at all. We were very curious about that. I could see that this back piece here I don't think was
original because there's a center piece that's not in the center. This is cut off. This piece
of wood, which is a side rail, used to be something else. There's an old mortise here
and plus these joints in the back had been pegged. But when we took this out, there's no hole through
this tenon. The peg isn't doing anything. So there's no doubt that the rails of this piece
must have been completely worn and destroyed, maybe from tax also, and all the side rails
have been replaced.
All right, it's great to see this all back together finally. So now we can work on the
finish. I still have some puttying to do. I'm either going to putty or wax some of these joints
that didn't come together quite right. There's a few other places in the back. I may try to tint
the putty. So I think before I do that, I'm going to experiment a little bit on the finish. I'm going
to work on the back of this leg and this side of this leg. I want to see what this wants to be
color-wise. So I'm going to try just patting the back of this leg with a little bit of alcohol
and sort of see what happens here. It's pulling off some dirt or something,
not changing too much, which is good. I think I'm going to try the inside of the front leg.
Yeah, it seems to be a really nice kind of a dark walnut color. That's what I wanted to know.
So now I'll go ahead and I'll do the putty things that I need to do, and then I'll start by cleaning
the back. So I was experimenting with some epoxy putty, and I was adding color to it,
and I was using epoxy putty because, if you've seen in my other videos, you can scrub off the
excess with a little bit of water or a gray pad. You don't have to sand, but it quickly became
apparent that when I did that, it just took it down to the bare wood. There's very little finish
on here. The finish is kind of a kind word. It seems like it's just a lot of dirt or something.
So I think what I ought to do is, I'm going to gently clean this whole thing
with oil soap and a rag, and then I'm going to pat finish on it, and then I'm going to
fill all the areas that need to be filled. I'll be using either epoxy putty or wax stick,
burn-in wax stick. I'm trying to strike a balance here between, you know, just scrubbing it all the
way down, getting rid of all this dirt. I want the beauty of the wood to come through, but I want to
leave some of the dirt to keep it looking old. Gently, a little at a time. Okay, I think I've
cleaned it as much as I dare. I'm going to let this dry overnight. All right, so I let this dry.
Now I'm going to pad a little finish on the side rail and even going onto the leg a little bit,
maybe up here, so I can get an idea of the color. The product I use to pad with is this.
This is called Black French. It's made for, I guess, French polishing, you call it. I'm going
to pad it on this, give me an idea of what the final color will be. All right, I seem to have
found a wax stick here that's a pretty good color match, I think. I'm going to try one of these top
joints here, see how it looks. All right, I think that that looks pretty good. The wax is
perfect color. Around this joint, there's a little bit of discoloration here and there. I may or may
not put a little stain on that later, but now I'm going to go in with my wax stick and the knives,
fill in all these joints on the top and anywhere else I think it needs it.
Okay, I filled in everything that I'm going to fill in. I've sanded some repair areas.
Now, I have some raw umber oil stain that I'm going to try. First, I'll try it on an area that's
not, that I cleaned some of the finish off, but not sanded down. If that looks good,
then I'll try it in the area that got sanded. So, I like the way it colored up this area. It kind
of blended in. It's not making everything even, which is great. I don't want it to be even. I
kind of, you know, don't want to change this too much. Now, I'm going to try it on this lighter
area here. All right, that looks really good. I think I'm going to just go ahead and keep dipping
my rag and go over this whole piece. I really like what it does to even the parts that I
had not sanded or discolored anyway. All right, this is a fast drying stain. It really dries in
an hour or so, but since it's the end of the day anyway, I'm going to let it dry overnight. Okay,
I let the stain dry overnight. So, now I'm going to apply a coat of shellac. This is shellac out
of the can and then thinned one-third with alcohol. It's a little bit thinner. You know,
when the stain dries like this, when it flashes off, it looks very dull. It looks dark and you
can't worry about what it looks like at that point. You have to, what it looked like when it
was wet with the stain, that's what it's going to look like when I put the shellac on. All right,
this is dried overnight. It looks good, although it's a little, still a little stark for finish
on the back. I think I'll give it one more coat, but first, this area where I have new wood
and then where the old wood got sanded a bit, that needs a little bit more color.
First, I'm going to abrade the area with a gray pad and then I'll go over it with some
dark walnut dye stain, but it'll be thinned out 50-50 with alcohol.
Okay, I've let this dry for about 45 minutes. In the meantime, I sanded and gray pad the entire
piece. I'm going to go over the part where I put the stain with just one brush stroke.
Then I'm going to go on, I'm going to put the coat on the back splat here in this horizontal
position, maybe even the legs too, so I can get the feet better. Then I'll stand it up.
All right, we'll let this dry till tomorrow. All right, this is dried overnight. That second
coat really did the trick. The wood is really sealed well now. Anyway, it looks great,
except it's awfully shiny, so I'm going to see if I can cut that down. I put some pumice stone
into a shaker here. I've got my brush. That's cutting it down really nicely,
so I'm going to go over the whole thing with the pumice. Then on the flat areas,
just put some on the rag.
Okay, so now I'll go over it with a good old beeswax polish.
I'll use a stencil brush that I use just for polishing. Okay, this is dried now actually
probably for an hour or so. I'm going to take a paper towel and just wipe it off,
buff it out, I should say. All right, we're ready to go to the upholsterer.
All right, back from the upholsterer. If you remember the settee, it was really broken up
in this area here, but we basically took it apart, re-glued it. The side rails had all been
replaced. They probably were wormy and needed to be replaced. These elements, although,
appear to me to be very old. The carving is just fantastic. It looks great.
It's a nice piece of furniture. It looks pretty good.
