798. Trimming/Chattering/Sgraffito/Glazing a Plate with Hsin-Chuen Lin 林新春 餐盤修坯紋飾上釉示範

Hsinchuen Lin
205 followers
6 Video Views·May 9, 2024
To see or buy my finished work and pottery tools, please visit my Online shops:
https://sawfish-endive-kgks.squarespace.com/shop
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
To watch more of my throwing videos, please visit my channel:
http://www.youtube.com/user/hsinchuen/videos
To learn more information, please visit my Website:
www.mypots.net
Follow me on Instagram: hsinchuenlin
Like me on Facebook page: Hsin-Chuen Lin Ceramics
[Music]
I'm using my d-shaped carop tow
[Music]
so you want to remember if you don't
want The Unwanted chattering use the
finger to hold the plate or hold ahead
of the
loop and you don't need to shave it in
too deep cu the to is very sharp so just
slightly cut it and uh you could remove
the clay easily
[Music]
[Music]
[Music]
so I show you if you want to avoid The
Unwanted chaing hold your to or closer
but if you want to do that the opposite
you want the chattering to show so what
do you do uh usually you want to hold
the two a little F away Loosely on the
speed up get the uh chatter
right now the tool is
vibrating and you just follow that
reason and it could be nice too if you
are planning to have your chattering
Mark is a way of a
decoration and then me carefully remove
the holding clay and slightly trim on
the rim
[Music]
[Music]
put a shallow bow using only one tool I
call the D shape the shape look like a
d and now if you want to do a bit of a
caring in here you can see that I use a
printer to print out this painting just
trace it and then I can use the uh SC to
or to C out the
decoration and first you first you want
to do is just trace it kind of arrange
the picture slightly closer to the end
of
it you can use a b pen to do that
[Music]
[Music]
okay use a 4 two so it will roll
easier and just trace it so you have
your design here
and you can see that is the tracing that
and uh I wouldn't do it now but I will
wait until this piece dry further and uh
I'm going to use my sco tool to C out
and for using my sco tool and this is
the Korean style is like a hook and you
can C out much much easier and faster
but you don't want to do that when it's
too wet okay so wait till the dry
further and uh I will show you how I
carve
it so I have been waiting for my plate
to try
further this was the line that I used
the ball pen to draw and now I'm going
to car divver using my SC tool and I'm
going to use the uh Timeless Mo so you
will save time to watch the whole
process
[Music]
I was using my sco tool the medium size
to cover out the painting lines a little
bit
deeper so it's very easy you can
download from internet to get your photo
or if you are good at drawing you can
all painting you can pain it on and then
just print out and then put it on top of
it and then trace it and the back I show
you the uh the ched Mark I did it on
purpose I intentionally leave this part
here the same height so I have a support
in the
center okay so that's uh my
demonstration for trimming and how I
finish decoration on this can call is
plate or shallow ball
[Music]
[Music]
for
[Music]
[Music]
[Music]
[Music]
all right so this is the final result
putting the the painting the Chinese
painting and uh use the SC tool to carve
it and then fill it with underglaze and
set it on glaze to cover it
thanks for watching and see you in the
next video
[Music]
[Music]
