We're an artist community (wire and metals) for everyone to share their ideas, post their art, tutorials/events & workshops or ask questions. We are a great buch of artists and have a lot of fun being creative together with challenges and fun projects to create every month.
To see what workshops I am currently running or to get full kits and or loose gemstones, frames for some of my tutorials, square/half round wire & more tutorials visit the shop section of my website:
Materials: - 1.6 mm (16 ga) square wire (round works, too) - 0.8 mm half round (20ga) wire (or 0.6 mm round (22ga)) - 0.8 mm wire (20ga) - 0.4 mm wire (26ga) - 0.8 mm (20ga) square wire (round works, too) - 1 x pear cabochon (mine is 20 mm x 24 mm) - 1 x 5 mm diamond cut gem or CZ - 2, 3, 4 & 5 mm copper beads (2 or 3 of each)
Tools: - Flush cutters - Heavy duty flush cutters - Chain nose pliers - Round nose pliers - Flat nose pliers
Chapters: 00:00 - Intro 00:08 - Frame & bail 03:10 - Cross members 04:42 - Start of weaves 13:56 - Seating of stone 23:30 - Small stone setting 25:50 - Accent beads
So we're going to get started by creating the base of the piece.
First I've made a little drawing with my stone in it so that I know roughly the shape and size
that I need to to make. For this piece I've used square wire but round wire will equally work
just for integrity. I like square wire because it seems to stay in shape better so if you have
that that's great if not that's also fine. So just use your fingers to bend or you can
equally just take an object and bend it in place. I just prefer to use my fingers personally
but everybody's different so you just do what works for you best. So reference it back to the
drawing every now and then and then just keep working. This can take some time that's absolutely
fine and just as long as you're happy with the end result that's great. So keep shaping it and as you
as you handle the wire and warm it up it'll also become easier to shape it. So just take your time
with that and then just keep going until you're satisfied. Okay so I've bent in the sides a little
bit so I'm happy with the overall shape and next we need to create the bail. So I'm manipulating
it so that the wires are parallel and next I'm bringing in my half round wires. So I'm going to
go at the bottom first attaching a little section there and then I'm flipping it over and I'm winding
the half round quite slowly around the let's call it the stem and yeah take your time with this as
well if you're using half round wire. Again if you don't have half round this can also work with
normal round wire. Use whatever you have handy and the end result will basically be the same.
So just take a little section at the bottom I should have done this at the start and wrap it
round to keep it in place and I reference it back to my stone. Next shaping the bail with
thick wire like that you may need to use a tool because it'd be hard to shape it with your fingers
unless you've got strong fingers. I know some people do. I don't. So keep shaping it
and then I'm going to feed the two legs through the opening and I'm just going to wrap the two
legs around the base or the top of the pear shall we say. Cut off a piece because it's easier to
loop it through. So gently manipulate the wire until it's in place. As I said it can be quite
difficult to do because it's quite thick wire. You don't really need to use that thicker wire.
If you don't have it handy you can use something else. I just find it great to have because it's
really strong and the frame won't actually bend or bend out of shape or anything like that.
So use a very strong pair of cuts. You don't want to ruin your dainty flush cutter so use a
heavy duty tool for that. Cut off those wires. I always have two handy. So next we need
to create the base. I've cut a couple of pieces here that I want to use. Two or three will suffice.
So you're just going to decide how many you need as you go along. I've cut three just in case but
I've only actually used two for this piece. So I'm going to start by lining them up with the bottom
and I'm going to wrap the legs around the bottom first. This is always a little bit fiddly at
this stage so just again take your time. The slower you go the easier it gets. I find I'm a
slow worker anyway so I just take my time but once you've done this a couple
times you get used to it as well. So wrap it round and be careful with the square wire if
you're using it that it sits flush. Sometimes it kind of sits sideways so that one of the edges
is pointing up which makes the whole wrap a little bit bulky. So you know pay attention to that to
keep the wrap as neat as possible. So then we're going to do the other side and just trim
off the ends. I'm going to repeat this with a second row of it and that was enough for this
piece because I wanted to just cradle this stone basically. So that's what it looks like. I'm going
to add the second one at the top right there and then that's what the final result looks like and
that's all you need. It doesn't need any more because the stone kind of sits at the bottom.
That's enough to keep it in place just to keep the stone from falling out and give it some support.
Next bringing in our wires and we are going to feed all of those three wires through the top
of the bail and these are going to be used to create the detail weaving. So I'm just going to
loop it around the bail a couple of times. Once is actually enough. A bit fiddly again at this stage
so just take your time. So feed it through the loop and gently pull it out. You really want to
make sure that the wires sit parallel to each other and don't cross over each other because
that will make the whole top bail bulky. So just take your time again and make sure that when you
are feeding them through they sit nice and flush to each other. So as you go along I straighten the
wires to pull them through as they tend to kind of bend over themselves and then get in the way.
So just take your time all the wires and if you wanted to if it's still a bit loose you can then
go around them again. I also take a pair of pliers to squeeze them down a little bit because that
will will kind of strengthen or harden the wire and it will stay in place better. So bring in
a pair of pliers and gently squish them down not too much obviously don't want to damage them.
And this is what it looks like. So there's quite long wires on each side and I'm going to go around
one more time to make sure that they are actually attached because I think they were a little bit
flimsy. So when you when you get that just loop them around one more time. Just make sure that
you lay the wires the second row of wires above the first you don't want the section to get too
bulky. So kind of lay them on on top not on top above the first row and again always make sure
that they are parallel to each other and that's what it looks like. So now it's much stronger.
Next going to bring in our weaving wire and I'm going to separate it out in half. So one half is
on the left and the other on the right. It's just how I work. Everybody does it differently. Some
people bring in separate pieces of weaving wire. I really tend to keep my wires and reuse them
throughout the project. So I don't like adding in new wires. It's just the way I work but everybody
is different. So in this case what we're going to weave is a five by two and the five by two
is basically five times wrapping around the base wire like I'm doing here. So I'm looping my 0.4
wire around the base five times and then I'm going to go around both wires at the same time twice
and then I'm going to repeat the process. I'm zooming in here a bit so hopefully you can see.
So it's five times around the base like so and just gently push the weave in as you work because
that will make sure that it's nice and neat. So I don't know everybody does this. I do it.
I tend to bring in a pair of pliers every now and then to push up the weaves because I like
I like them neat. So that's the way I work but as I said everybody is different and has their
technique. Do whatever works for you and then obviously again twice around both wires here.
That's what it looks like. So we've got several rows that you will need to
adjust the weaves depending on how big your stone is and how big your frame. So this is just a guide.
I'll tell you how much how many weaves I've used for my size of stone and then you'll just need to
adjust it to obviously your stone will be different from mine so just adjust it to
whatever size stone you have. So just going to gently twirl it in an anti-clockwise motion
around the frame. Be sure to leave a little bit of a loop at the top and then just gently shape it.
So again this is pretty much an organic design as well you know you you can just lay down the way
you like it slightly differently obviously to the way I've done it. This is just a guidance
to how I've made this pendant so you can adjust it to your liking and see whichever way you like
you know the shape best. So just loop it around twice again at the bottom to make sure that it's
nice and tight and this is what it looks like. So next we're going to weave around the top three
wires so this goes five times around the top wire then once around the top two wires once around
the bottom two wires back up around the top two wires and then start afresh with your five wraps
around the top wire. So when you're starting a weave sometimes it gets pushed in so I want to
show you a bit more up close. So this is what it looks like so basically you start and I've done
my five at the top I'm wrapping around both top wires once bring it up in between wire one and two
wrap it around the two bottom wires once bring it in between two and three and wrap it around
the top two wires once and then back around the top wire five times and then repeat this weave
until you've got enough. Again you need to obviously you know create enough weave for
your stone and your size of frame so I'm showing you how many I've done here so that you know
how many instances of that weave I've done and then you just obviously adjust it.
So this is what it looks like and then obviously repeat enough times so that you have
got enough stone and obviously it won't stay in place yet but I like to reference back to
it as I work so I do bring it in every now and then just to see what the weave should look like.
So I'm going to then just twist this wire from over the top and I'm going to kind of follow the
first weave and then attach it to the bottom as well kind of lay it across and again this is
organic you know so you go roughly how you like it as well. I quite like that so now I'm going to
attach the bottom wires around the frame again that's what it looks like obviously take your
time with the wires and as you're attaching them make sure once again that they are parallel to
each other if they kind of cross over they create a bit of bulk at the bottom so just when you're
attaching them be sure to make make sure that they lay next to each other rather than crossing each
other. There we go if you need to once again you can attach it wrap it one more time I tend to
wrap around twice and then also press it down with pliers just to get enough
grip onto the frame wire and this is where the frame thickness is quite helpful
because it obviously won't buckle and it's quite strong that's why I like to use thicker wire for
my frames. Right so that's the stone set in place and that's kind of what it looks like so far
I like that at the moment so setting it aside and now we're creating a shape with the three wires
that we had left over from the top weave and I'm going to do the same weave again that we've
just done from the top so it's five times around the top again I'm going to zoom in to show you
I'm just showing you where to start so just wrap around five times around the top
and then I'm going to wrap around once around the top two wires once around the bottom wires
both bottom wires once and then obviously you go back in between wire two and three and go around
the top two wires once and then repeat the process start with your five wraps around the top wire
again and then that's the whole process completed so that's one instance of the weave and you just
repeat that until you've got enough weave. See here I bring in my pliers these bent nose pliers
are perfect I like using them because they really help so that's what it looks like so I've got
enough again I bring my stone in to reference it this kind of will keep the stone in place it's not
quite as tight as it should be yet or as it as you want it to be so you need to make sure that
afterwards you secure it a bit more but I'll show you how to do that in a second so just bring in
your wires and attach it around one of the cross members that we have attached
to keep the stone in place and this will also start helping to secure the stone in place because
obviously there's a bit of structure around it so just kind of shape it as you like it to be before
you tie it down flip it over and then you can start attaching the wires around the cross members
you could also attach it around the frame but if you start with the cross members it will give the stone
a little bit of integrity keep it in place as well earlier you saw me wrap the wires all three in one
go once you start getting into design a bit more you'll need to kind of wrap one wire at a time
because obviously space becomes limited and it's much easier to manipulate and this is what it
looks like when you have attached all three wires so next we're going to reuse those wires on the
side and I'm going to set aside one of the wires and I'm going to now flip it over so we're working
now with the bottom two wires and we're just going to recreate a simple two by five just like we did
at the beginning um of the weave so separate them out and just restart so this time we're going to
put the um the wraps five wraps on the bottom wire so just loop your wire around bottom the
wire two twine uh five times and remember to push up your weave to make sure that it's nice and neat
or we don't have to I just prefer to do it because it will make the whole piece look neat and tidy so
I quite like doing it it may you know elongate the time or take longer to get the piece finished
but I find personally it looks better when you do that so just keep going until you have got
your weaves enough weaves to create the shape push it in I like to use my bentonite pliers
so once you've done enough we are going to bend the first wire upwards because we're going to wrap
around it so make sure this is pointing upwards and then we're going to twirl
anti-clockwise and meet up with the frame again and this is creating a little detail here on the
side next we're just going to take those wires now and we're going to wrap these around the frame
again this is why I like to use sturdy frame wire because you can manipulate it and attach
things to it without it you know buckling or bending out of out of shape so I like using
thicker wire for that so just pull this up with a pair of pliers as I said earlier once you get a
bit further into design you know space becomes sparse um so you just go slower and attach one
at a time if necessary so just wrap around one more time and that will make sure everything is
attached tightly pull that through and then give it a good pull to attach and then maybe
squidge it down a bit very technical term is that and then just sort of squidge it down and
attach so next I quite like to use single wires as little detail pieces so you don't need to put
any weave on it or anything but you could if you wanted to just coil wire around it if you want
that extra detail so I'm going to use that single wire to just create a little bit of interest around
the um the swirl we've just made and I'm going to attach it as well
like we did with the other wires pull it up and this in turn will also
what can I say reunite the three wires and so that then you can use these in a separate design
so they're all back together and now we're going to create a new weave so it's the same pattern
again that we've just done so it is five times around the top wire once around wire one and two
once around wire two and three and then once around wire one and two again and then start
afresh as always take your time and use your pliers to adjust the weave if necessary
when you're starting in your weave like that it's always a little bit more fiddly at the base
because you kind of need to get the wires in there to cover the area um so it may not look as
neat as you want in the beginning but once you get a bit further along and you use a pair of
pliers like that to push the weave in it bunches everything up and then it starts to look okay and
also once you've done that there's a little bit more integrity to the weave and it'll start to
to get easier to do the weave as well um so just keep going until you've got enough
of a weave and that's what it looks like so far and this is the amount of weaves we need to create
the little detail now so we're just going to bend it round and create a swirl and move back down to
the stone now these weaves can be adjusted later on if you're not happy with the way they're sitting
you can then use um a pair of pliers to slightly adjust them i do that quite often
and go over a piece once it's settled and just adjust to the way i like it so entirely up to
you again you can leave it over the top weave or under the weave coming from the top so whatever
you like so once you have decided where you want the wire to sit bring it through near or behind
the uh the cross member at the stone and this will wedge the stone in place as well so you just
pull the wire through then attach the wire to the cross member like so um and you have that one
little wire left at the front and once again we're going to use this to create a little bit of
interest and detail so what i'm going to do with it is create a little swirl that will fit right
into the um the swirl that the weave has created so i'm putting my thumb over it and that will give
me the opportunity to shape the wire in place so that's really helpful when trying to create a
detail like that that fits into another weave so put your thumb where you want it to sit
and that will help you to guide the wire in place and then once again obviously feed it through and
attach to the same cross member and this will further wedge your stone in place
and kind of adjust it you can adjust the size where the weave sits i mean the loop sits and so
forth until you're satisfied with the result that's what it looks like so far next going to get rid of
the wires at the bottom i thought i could maybe do something with it but i actually didn't like
the look of it so i decided to trim them off once again um up to you you could do something with it
organic design again so you may decide that you'd like to do an extra weave or so it's up to you
lastly we've got one lonely single wire at the top so i thought it would be quite nice to create
a little detail so shape it into place and kind of shape it along the longer weaves coming from
the top and wrap it around a little gap at the bottom again wrap it twice or so until it's nice
and secure so just use your pliers and i'm putting my finger over the wire where it's coming through
at the front to prevent the wire to be pulled out of shape as you are tightening it at the
bottom so put your finger through when you're tightening it so that it won't be bent out of
shape next creating a little detail at the bottom with that wire so once again i'm putting my finger
where i want the swirl to sit and i'm guiding it into place and i kind of lay it alongside
the little weave on the left of the stone and i'm bringing the wire underneath one of the
detailed swirls and i'm going to attach it to the frame to one of the cross members
um and just secure it in place there so this one doesn't doesn't really matter where you put that
one as it's just a single wire so just attach it wherever so that it's out of place and just keeps
the shape and then basically shape it after and that's what it looks like so far next we need to
create a little detail stone for that again using square wire you can also use round obviously but
i find square wire works a lot better to keep the stone in place and it kind of shapes better too
so i kind of like to use it so very gently create the initial cradle just big enough for the table
to to sit on top of it but not big enough for the stone to fall out you want the light to go
through the stones you want as much open area as possible uh while keeping the stone secure so once
you've done that very slowly the slower you go the neater it will be um it takes a bit of practice
but once you've got it down it's a beautiful way of setting stones my actual favorite to showcase
little facet cuts so very gently loop the wire around take your time and make sure that the
whole of the table is covered by the wire keep going around until you make sure the stone is
very securely wedged um and then all we're going to do is bring that wire from the top so i think
i need to go a little bit further so you can just adjust it and i'm going to bring it round until
the whole table is covered as i said and all i'm going to do once that's happened i'm going to wrap
the top wire around the bottom wire so for that i'm going to bring a pair of pliers and i'm bending
the wire away from the stone the bottom wire at a 90 degree angle then i'm going to wrap the top
wire as closely as possible to the actual weave or the wrap and i'm looping it around so it looks a
bit like a lollipop basically and that's what it looks like very secure won't come apart
um and if you need to you can secure the the loop a bit with the pliers trim off the edges and then
attach it to the frame at the back here so it doesn't again matter where you attach it to you
kind of spread the two little tails out and attach them on one side each because that will secure the
stone better it will be not as loose so this is quite nice and tight in there and i love the way
it looks um and lastly one of my favorite bits is to actually add the detailed copper beads i love
adding them in because they add so much interest to a piece um i adore them if you don't have
copper beads um i quite often use microfaceted gemstones um because not only are they beautiful
genuine gemstones as well but they add a lot of sparkle just because of the way they're faceted
so if you don't have that you can add whatever you like to it as well obviously this is just
to create detail and hide some of the frame that's left on the side if you don't have any
beads at all you can attach a little bit of wire where you see me here attaching the 0.4 and then
hide that little bit of frame that way so you can also attach these beads if you want to with 0.6
millimeter wires um which has got a little bit more strength than the 0.4 um and attach it this
way i tend to reuse the same piece of wire throughout my piece as i said earlier so even
when attaching my accents i kind of feed the wire through little gaps and nooks and crannies to
bring the wire up and then add more accents that way because obviously there's less of a chance of
the wire to come undone so i do that as well and the last step is to obviously trim off your wires
in such a way that don't snag on clothing um yes and that's that so don't forget to hit subscribe
for more tutorials and feel free to join my brand new community group
wire wrap artists and jewelry makers worldwide on facebook
don't forget to subscribe and thank you so much for watching