We're an artist community (wire and metals) for everyone to share their ideas, post their art, tutorials/events & workshops or ask questions. We are a great buch of artists and have a lot of fun being creative together with challenges and fun projects to create every month.
To see what workshops I am currently running or to get full kits and or loose gemstones, frames for some of my tutorials, square/half round wire & more tutorials visit the shop section of my website:
So we're going to start by cutting three lengths of 35 centimeter long wire now
I've used square 0.8 millimeter wire for this but you can also use round if you
don't have square it'll work just as well it's just that the square sits
easier when you are creating frames like this but as I said round works just as
well so we need to create a loop right in the middle of one of the wires and
it's going to be used to suspend the bead or whatever you want to suspend
from it it's just a way of actually creating a little loop at the bottom
for things to dangle off your pendant so just use your round nose pliers and
that's what it looks like next bring in the other wires that we've cut and line
them up so one on each side so that the loop is actually in the center and
bring in your 0.8 millimeter half round now again if you don't have
half round you can use 0.6 millimeter wire perhaps to do the winding like that
or you can just create a weave around the three wires at the bottom with some
0.4 millimeter wires so there are several options you know that you can
then use alternatives if you don't have the materials available so 0.4
would work if you're weaving for 0.6 or 0.8 if you are doing it like this so just
take your time when winding the wires around and then we're going to trim off
just be sure that when you cut the wires the the cut ends are sitting flush on
the inside that'll prevent snagging on clothing when you're wearing the piece
later so next we're going to bend the wires in a V shape so be sure to be as
close to the bottom as possible and then take your bead and have a look and
see where the bead actually sits in that V and see if you're happy with the space
you can adjust it according to how you like it and so that's good for me so I'm
going to keep that spacing and the next I'm going to shape the wires to go
around the bead now you could use a round object if you prefer to do it that
way I always use my hands I prefer to manipulate the wire this way but
everybody has their own methods so just shape it until you're satisfied with the
fit take my bead and it should be wedged securely in the middle like so so that
the bead is then sitting securely once you bend the wires in place next we need
to bend the top wires at a sort of 90 degree angle so that they sit parallel
to each other and this is going to be the section where we're going to create
the bail so we're going to tie these to each other with a piece of 25 centimeter
0.8 mil half round wire now again if you don't have your half round you could use
round wire as well again 0.6 or 0.8 to keep with the same gauge and just see
what you prefer but it's not necessary that you use the half round it just looks
really nice I like using it and it's easy to work with so we're going to wrap
this a couple of times around all of the wires like so and once around the side
at the bottom to anchor it in place and next we separate out the six wires at
the top so keep the two at the front for the bail and then two on each side
which some of which we're going to be using for decorations and some we're
going to be trimming off and you can keep them to add more decors I've kept
this pendant fairly simple so it's entirely up to you you can just follow
the pattern and then do your own thing as well so again take your half round
wire and very carefully wrap this around the front two wires which are
going to be our bail so just take your time and do it slowly the neater you
work the better the end result so this is about 25 centimeters gives you
roughly about two centimeters worth of bail if you want a longer bail a bigger
bail you can use more wire so next we just need to shape this into the
bail again you can use a pair of bail making pliers for that I again use my
hands just to shape the bail in place like so and feed the two legs coming out
of the bail feed that through the pendant on back to front and we're going
to wrap the two legs that are coming through the front around one around each
side once and that's enough to anchor it in place this is basically just to keep
the bail in place and anchor it so that everything is nice and sturdy now
sometimes you need to manipulate the wire a bit to sit properly just take
your time with it and it will it will fall into place just form the wires
around the base and as I said one wrap is enough so I'm bringing this through
just one more time now you can see I'm fighting the wire a little bit here I
have used one mil wire for the pendant which I found was a little bit too
difficult to work with personally that's why I think 0.8 millimeter wire is much
better for this project as it's much easier to work with so next we're going
to check the bead and the fit is great so I'm happy with that and I'm going to
bend in the bottom of the pendant and to create the actual cradle for the
pendant now for that I'm going to bring in a pair of flat nose pliers like so
because then the actual size of the bend is precisely the same every time when
you're using chain nose pliers and you have to kind of guess where you put the
pliers the last time so if you have something like that that's really
helpful to make sure you gauge the size and where you put the bend and I find
these flat nose pliers perfect for that I'm going to do the back now as well
bend them in and just a little bit because obviously we need to bring the
bead in before you bend it over the stone so bend it a little bit and once
you have fitted your beads you can then bend everything over the stone now I've
used an undrilled bead here but you could obviously use one that has a hole
so we can just hide it so it's entirely up to you what you have available so it
doesn't necessarily have to be an undrilled bead now next we're going to
use one of the wires that came out of the bail so from the back and I'm going
to use this as a decor you could trim it off but I've used this particular one as
a decor to go around the front as a little twirl on top of the bail so I'm
just shaping it now use your round nose pliers for that and then what I find
quite helpful is cut the straight bit off when you're creating twirls that way
when you finished with the twirls they look perfectly round and don't have that
sort of square section right at the front which can look quite untidy
sometimes so I like to cut that off and so I'm shaping it here and next you kind
of lay it against the bail at the side where you'd like it to sit press it into
place next take one of the wires on the right
hand side here and fold it over and up and this is to create the swirl and this
one is going to go back behind the bail so it's going upwards rather than
downwards just to create a little bit of detail on the bail itself just shape as
you go along until you're satisfied with the results and next attach the wire to
the bail this is wire is going to be trimmed off later on I tend to keep a
lot of my wires in place and don't cut them off just in case I decide later on
I want to do something different with it so quite often my pieces look like an
octopus and unlike some other people that I know that work much neater and
tidier than myself I just have a chaotic style and and the next step here is to
use one of the wires on the right and we're going to go around the front to
create a little sweep be sure to leave a little funnel shaped section this is
where the the beads are going to sit later on the copper beads or whatever
else you have available you can also use the gem gemstone rounds if you have
those or whatever else you have that you can feed on to a 0.4 millimeter wire so
this wire gets bent around the frame just very gently I'm going to pull that
tight and this will then wedge it in place I tend to square wire sometimes
can be tricky to work with because you need to make sure it stays straight at
all times the slightest twist and and it looks unsightly so you need to
make sure it keeps straight I keep straightening with my fingers which also
warms it and makes it then more malleable to work with creating another
twirl and this design again is a very sort of organic design because obviously
your twirls will be really different from mine so it'll be a different look
to it which is quite nice about these designs because no two pieces will
actually look exactly the same so twirl the square wire around itself and this
is where the square wire is actually a lot nicer than the round because it has
a lot more surface area and I think it looks quite nice when you put them in
designs like this but every every type of wire has its own merits and you know
everybody has different preference too so it's entirely up to you so just keep
manipulating it and shaping it until you're satisfied with the result and
then just kind of shape it over the stone and then remember to cut that
straight little first section off when you create the loop at first right so
next we need to trim off all the excess wires as I said earlier you can still
reuse them and add more detail if you wanted to as I said I wanted to keep it
fairly simple so this is what my version looks like so next we're going to add in
our accent beans so for that I'm just bringing in another 0.4 millimeter piece
of wire and you could use 0.6 for added strength which will also anchor much
easier to the frame and won't come undone if you prefer to use that again
that's up to you or depending on what materials you have available so just
whichever you use make sure you anchor them properly because obviously you
don't want the beads to fall off when you're wearing the piece and so be sure
to anchor the wire so that it runs coming from one end and lays parallel
with the square wire that we're using as a channel so that they sit quite
flush coming in from the one side once you're satisfied with the way it looks
just come in from the end and make sure you anchor them in place again so that
as I said they are sturdy and it doesn't come undone in case it gets hooked on
something and trim off the wires next we're going to attach the little swirl
at the bottom because what tends to happen when you have swirls like that if
you're wearing them they can easily get caught in your clothing so I find it
important when you are wearing your pieces or selling them on you want to
make sure that everything stays as it is intended to so attach it to the frame
and lastly take your head pin and attach a little bead to it or whatever accent
you decide looks best on your piece a little rosary link is all you need and
later on a jump ring to attach to the piece itself and that's super easy and
that's the pendant all done now I've oxidized mine and I haven't shown this
in this video but there is a video on my channel where you can actually have a
look and see how the process works and otherwise just enjoy the pendant as is
and thank you so much for watching and hit follow for more tutorials