Hey Guys, in this Video I will show you how to create a pedant with coils and a faceted focal stone. I will show you how to create the main frame create the coils, add the components and detail as well as set smaller, faceted gemstones. Hope you enjoy and please let me now what you think in the comments!
We're an artist community (wire and metals) for everyone to share their ideas, post their art, tutorials/events & workshops or ask questions. We are a great buch of artists and have a lot of fun being creative together with challenges and fun projects to create every month.
To see what workshops I am currently running or to get full kits and or loose gemstones, frames for some of my tutorials, square/half round wire & more tutorials visit my web shop:
Materials: - 1.3 mm (16 ga) square wire - 1 mm (18 ga) square wire - 0.6 mm (22 ga) wire - 0.8 mm (20 ga) wire - 0.3 mm (28 ga) wire - 12 to 20 mm round, faceted focal or flat-back cabochon - 5 mm round, faceted accent stone - 2 mm copper beads - 2. 5 mm copper beads - 3 mm copper beads - 4 mm copper beads
Tools: - Fine tipped flush cutters - Heavy duty flush cutters - Chain nose pliers - Round nose pliers - Flat nose pliers
Hi guys, this is Nadia from Urbanicrafts and today I want to show you how to create coils
and how to use them in a pendant. If you haven't already hit the subscribe button because I upload
new stuff on a regular basis. I quite often make pdf tutorials for the videos I put up on here.
They also come with kits. I have all sorts of gemstones, square half round wire and beads and
all sorts of nice goodies on my website so I will pop a link below and you can take a gander over
and see if there's anything you fancy. Last but not least we have an awesome wire wrap group which
I will also pop a link below so take a look and come and join us. Right let's get started.
Right so to begin with we need to cut our base wire and for this I've used quite a thick piece
of square wire. As I said in the text there you can use round as well but square has got better
integrity and wires that you're going to attach to it also bind better because of the square
profile obviously. So what I'm doing here is I'm creating a v-shape to begin with so make a bend
right in the middle of the wire and then I'm slowly going to shape it into an oval sort of
navette looking shape and I try and make sure that both sides are as symmetrical as possible before
I move on to the next step. So just take your time with that the more symmetrical the better
obviously. So once you have a shape that you're happy with I'm going to or you can go and bend
the wires for the bail like that so a little bit uneven here but you can fix that. So once you've
sorted that out we need to bind the bail wires together so for that I'm using my half round wire
again you can use round if you don't have it just go down one gauge so this is 0.6
if you don't have half round I would probably go four mil or so and we can use six as well
it's actually not too bad but it will stick out a little bit more because it's obviously
thicker. So what I'm doing here is I'm very slowly wrapping the half round wire around the two bail
wires like that you can either rotate the piece like I'm doing here or you can wrap the wire
around the wires whichever works best for you and just you know practice and see what works and
push the weaves together as you go and continue until you have enough of a length. So this is
what I've got here and I'm going to slowly finish up and I've got a little bit of a length left
and the next step is to shape the bail so I'm always bending the wires forward a little bit
so that the resulting loop sits nice and flush above the pendant itself. So I'm going to bend
the legs out a little bit so that when I fold the bail or the loop shut they line up perfectly with
the actual frame at the front. So I'm shaping it here and just take my time with that
and then slowly close it off and that's what it looks like so far and you can see the legs line
up with the actual oval shape. So next we need to create a space for the stone to sit in and
this is one of my mandala focals I've got these in my shop if you're interested. So I'm bending
the wires outwards and what I'm doing here is I'm going to create a round shape sort of roughly in
this the same size as the stone just a tiny bit smaller which will act like a cradle almost. So
I'm bending the wires in a in an interest circle and I'm using my tools here to help me shape it
and it doesn't need to be exact you can just roughly get the shape right and make sure that
the stone doesn't actually fall through. So obviously I always work and try and make everything
as symmetrical as possible doesn't always work that way but as long as it fits roughly that's
okay. So I've adjusted the shape a little bit and I'm checking the fit and I'm quite happy with the
shape and what I'm doing next is bending the remaining wires downwards and I'm going to attach
these to the frame. So obviously with a thicker wire they're a little bit harder to manipulate
than your one millimeter or your 0.8 so just take your time with that because they're a little bit
more difficult to to work with. So I'm going to be attaching these to the frame near the bottom
yeah so as I said because they're a little bit harder I tend to use my tools and and kind of
pre-shape them before using my pliers to kind of feed them around the frame itself. Now when
you're attaching them always attach them the same way so here in this instance the wire is below
and the wire is attached below the cross member so make sure that when you're attaching it on the
other side you do the same thing. So just one wrap is enough you can do two if you want to
but one will work just fine. So I'm going to bend the wires inwards a little bit before
trimming them off because obviously this will reduce the snag risk on any clothing. Always
try and trim off wires away from areas that are exposed so that it doesn't snag on clothing or
skin or or anything that it could potentially get hooked on and then I'm just flattening it down
with my wires my pliers and I'm doing the same on the other side. So satisfied with the fit just
testing that the stone fits you can always adjust the fit at this stage but it's okay like that.
So next we're going to add some more cross members which will be used to add some detail
to the pendant later on so I'm feeding these through and the first wire will be attached
just above the circle so I'm needing to open this a little bit so I'm pressing down the
wire so it's quite important that the backing wire is obviously at the back to create like a
cradle for the stone to fit in. So now the one millimeter 18 gauge wire fits through that gap
and I'm going to attach it just as I did with the cross members at the bottom. So again it's
slightly thicker than your your normal base wires at one mil so I'm just using my pliers to help me
and you can see that I am holding my thumb over the other side just so that the wire doesn't slip
and the one side doesn't become longer than the other because the wire is being pulled through.
So I'm just holding it in place while I adjust the actual wrap with my pliers and I keep straightening
out the wires and then I can move on to the next side and I'm going to do the same with the bottom
wire as well. So next is the coils so we're going to create our first coil. Now I've made two coils
for this pendant and the base wires are all the same length and the weaving wire or the wrapping
wire 0.328 gauge is 1.5 centimeters for the short one and 2 meters for the big one because we have
different sized coils. Now I am using a drill to create my coils. Some people don't like doing that
they prefer to wrap everything by hand and there's no wrong or right way you do whatever
works best for you. I just like using those because it's a lot quicker to create coils.
So I'm attaching my weaving wire to the thinner base which is your 0.6 mil which will get wrapped
around the larger base but you'll see in a minute. So I'm having just a very short tail of both of
these wires and I am attaching the initial coil I have made. I'm feeding it inside the chuck before
tightening that up and that will hold everything in place. I'm just tightening that up some more
and you can see that the 0.328 gauge wire is now loose and I'm going to be coiling it around
the 0.622 gauge wire. You have to begin very slowly and hold the wire quite tightly
towards the base like so and just begin slowly. The only problem is with this is that the 0.6
millimeter base wire just keeps flopping around. So a solution that I have found works quite well
is to put the base wire through anything really that will hold it steady. In this instance because
I'm doing a video I've used something moveable like this reel of empty wire or this empty reel
of wire and this will just keep the base wire steady. You can see it works actually quite nicely
and so it won't flop around and you can create a base coil quite easily like that. You can really
use anything. Sometimes I use the handle of my coffee cup and that works quite well. So you just
create a length with the drill. You can go as fast or slow as possible. I just find that the slower I
go the more neat the coil will be in the end and I just keep my thumb very close to the wire end
and that helps it to be quite nice and tight as well. As you can see it rotates quite
beautifully and it works quite nicely and just make sure that the wire, the weaving wire or
the coiling wire rather is nice and loose so it doesn't tighten up as you would. So here you go.
So this is about a 13 centimeter initial coil. I don't really know what that is in inches.
You can work that out. I think there's converters on google. So this is the mini or the first
base coil and I'm now going to attach the small coil onto the larger base wire which is the 0.820
gauge and we want to try to have the coil central so it doesn't really matter in the beginning it's
easier to have a shorter end. So I am attaching my coil to a short end while I hold it in place
and I very slowly wrap the coil around. Now one thing I have to say about coil lengths and wire
lengths. I always used to specify how much wire to use for each coil and and how long a coil it
produces. The only problem is that everybody tends to coil the smaller coil around the large
base wire differently. You can coil it by holding the wire in place so that the smaller coil can't
slip if that makes any sense and that will create a much tighter final coil than as if you would
use or let it loose and let the smaller coil slip along the the smaller base wire. I hope that all
makes sense but you'll see what I mean when you when you do it yourself. So once you've finished
your larger coil we're using some leftover 0.328 gauge wire to fill in the gap of that coil.
So what I do here is I simply hold the wire with my left hand or your right hand depending what
what feels easier for you and I rotate the finished coil and that slots the smaller wire
in place. It's important that the coil is nice and tight so that the the smaller wire doesn't
slip in the gap. So that's that and now we're creating the second coil. You can see here this
length is 17 centimeters so a little bit longer than the first one. So two coils one is five
centimeters and the other six centimeters. So I've done both of my coils and I'm going to take the
longer coil and I'm going to be attaching it to the the frame somewhere near the middle
and I'm wrapping my the the 0.8 millimeter base wire around the frame and I'm going to attach
this about three or four times just to make sure that it's got a very snug and tight fit.
Just one more time I don't I won't always show how many times I attached here we'll just mention it
otherwise the video would be like five hours long and I'll just try and keep it as educational as
possible and short as possible. So the coil is attached and here I'm showing you how to do one
more wrap and you can see I use my tools quite often for that as well just to make sure the
wrap is nice and tight. So next I've got this coil attached pulling it tight and now I'm placing my
stone and the coil will be wrapped around the side of that faceted mandala stone and this won't
really hold it in place just yet and this is just an initial sort of start to the to the actual wrap.
So I'm feeding my my wire through the top of the bail like so and then I'm going to attach the
other end of the coil to the bail and again I'm using several wraps three or four to make sure
that it's nice and tight using my pliers to make sure I pull them tight and then squeeze together
and then after that you can shape it to your liking obviously you can adjust this is just a
beginning and you can shape it at a later stage. So next we're going to be attaching the the shorter
coil so I'm going to find the space at the top of the stone on the left hand side of the pendant
I'm going to attach the base wire of that coil to the frame on the left so shaping it through and
at this stage the shape really isn't that critical just yet you obviously just want to find where
it's going to sit and how it's going to be attached so I'm happy with with where it sits.
So I'm going to be attaching it to the frame as close to the entry point as possible so that there
is the least amount of wiggle room if that makes sense and the further away the attachment point is
the more chance of the coil to to shift or move so try and attach it where it exits the design.
So shaping it and I'm going to be attaching it to the bottom somewhere so I'm going to give it a
bit of a shape in an anti-clockwise direction and satisfied with that so I'm going to find a
point where I'm going to attach it to the frame here near the bottom. At this stage everything
is still pretty loose and and movable so nothing you know holds things in place so don't worry if
if the stone falls out or things don't don't stay put just yet this is just a little stage.
So we can shape it now. So next we need to create the first detail with our square wire and I'm
using the bottom left one millimeter wire and I'm shaping it following the first coil going up to
the bail so again this is very organic and you can place that coil wherever you like you may like it
outside or on the inside entirely up to you personal preference so again this is quite thick
wire so use your tools for that and and just don't fight it just let it work and let it sort of do
its own thing if you force it it's just going to it's going to fight back basically so just
use your tools to manipulate it into the right direction and the more time you take with that
the easier it'll get and I'm just wrapping it around several times around the bail just to
make sure it's nice and tight and obviously just remember that the loose end once it's attached
needs to be hidden away from any snagging areas so that's what it looks like so far.
So next we're going to do the same with the top left square wire so again organic shape
so yours is never going to look exactly the same as mine because obviously
there's no sort of set rule on where you're going to place your wire so just be careful
with your tools when you're using them not to squeeze too hard because especially copper
and silver and all those soft metals get marked really easily so just take your time when you
use your tools you can polish and buff out any marks at a later stage but obviously nonetheless
you have in the beginning the easier the less work it is at the later stage to clean it up when
you're done with the pendant. So the top wire just gets bent around the coil and like the first one
I'm going to feed it through the bail now often it's a lot easier to just cut off some of the
wire because it's easier to feed through a shorter length of wire than a longer one as you can see
here but I'm quite stingy with my wire I don't want to cut anything off until I'm 100% sure that
I'm not going to be using it again so that's why I keep saying my pieces always look like
like an octopus say that all the time because I just never cut any wires off in case I use it all
the time. Some people like to add in components as they go along I just keep reusing the same
wires in my design and that's why they look like that. So that's that attached so the next step is
to get rid of those wires at the back and as I said before just make sure you trim them off
inside the bail. So I tend to squeeze them together with a pair of pliers and just to make sure
everything's nice and tight and then I'm going to trim off a bit at the top and the remaining wires
will then just be bent over the bail with a pair of pliers because that way I've got more control
over where I'm going to place the wires and how tight they sit but as I said everybody has their
own sort of techniques with that you're going to develop yours and that's what it looks like so far.
So next we're going to create a swirl with the right hand one millimeter 18 gauge wire
so you just need to make sure that when you are doing the twisting that the wires are flat
so I'm just kind of adjusting the way the wire sits so that I have a flat surface and not a
slight twist in the square wire which can be a pain sometimes when working with that profile
because it loves to twist and give you an uneven shape so just try and keep it straight.
Using pliers and I'm going to manipulate the wire very gently we're trying not to mark it and I'm
going to feed it through a gap in between the stone and the coil and find a gap in the frame
and feed it through again you have to be really gentle at this stage not to mark the wire and not
twist it and definitely not scratch the stone so definitely something that you just take your
time with and do it slowly. It's a little bit haphazard here because I'm trying to do this
while I am looking through the camera which sometimes can be a little bit difficult to do
so this is how I do it generally and so I very gently feed the wire through and I coil I make
the coil smaller as I go along with a flick of my wrist and then I very gently pull on the other
side and I never do any jerky movements or fast sort of pulling because that can distort everything
and and bend everything out of shape so when I'm happy with this sort of initial placement I
fine-tune and I arrange the swirl with my pair of pliers and I haven't attached the wire at this
point I'm still adjusting and this can be quite a slow process but you've got the ability to shape
it to your liking until you're satisfied. So far so good. So next I am using my round nose pliers
because those will mark those square wires much less and you've got a lot more control to get a
nice round swirl so once I'm happy with the fit I'm going to attach that square wire to the frame
so for that again I am shaping it and I really should have cut off a little bit of the wire to
make the attaching easier because as I said earlier the shorter the wire that you're trying
to attach to the frame the easier it is to manipulate it, I find anyway, and I'm using my
pliers to very gently coax the wire through the frame and there's no set point where to attach it
as long as it's nice and tight one wrap is enough to make sure it's attached to the frame
so that's what it looks like. So happy with the fit and I'm going to trim off that extra wire as
I said before make sure that it's trimmed off nice and tight and then I'm manipulating the
the remaining bit of wire to fit within the frame so that the cut end doesn't stick out anywhere
so that's what it looks like so far. So next I'm going to create a detail at the bottom
and this is the remaining square wire at the bottom and I am coiling it in like so into a
clockwise direction over the stone again get an initial shape and I'm going to very gently feed
it again in between the stone and the coil and find the gap in the frame before I feed it through
to the back again as I said earlier just be very gentle with the square wires because they love to
twist and then it doesn't look quite as nice as it would if you know you've got a flat profile
so pulling it through and you can see me jiggling the wire very slightly makes me think of that
song that's going around TikTok at the moment don't worry I'm not going to sing it right so
adjusting it and I am giving it a slight twist you can see here I'm using my round nose pliers
and I am using that and twisting it to get a shape and I love doing this because it's very
satisfying to get a nice coil and again as I said do this really slowly take your time no fast sort
movements and you can adjust later on so happy with that so now I've attached the wire to the
back with a coil and I'm going to trim this off again nice and tight and now we're going to create
a few details at the back and the front so twisty bits so I'm going to create a clockwise swirl
and I'm going to place it at the bottom of the smaller coil and I'm going to fit it inside the
swirl like so and I'm going to be attaching it to the frame the wire I'm using here is the wire of
the coil the base wire of the coil the 0.8 millimeter 20 gauge wire and I'm using that
to create the detail at the coil like so you can just manipulate it with a pair of pliers once it's
attached so next I'm using that wire to wrap around the frame several times so you just need
to try and find the gap somewhere and the busier the design the harder it is to try and find the
gap where to attach the wire the important part is to always stay neat as neat as you can even
when you are working on the back because obviously the back is as important as the front in my
opinion so the neater the better so always try and find a space where it'll look good even if it's
the back of the pendant so just wrap this several times and make sure it's all attached and that is
the first little detail here at the bottom and next we're going to be trimming that wire off
again nice and tidy all right so now we're going to create the next detail so we're going to use
the remaining 0.8 20 millimeter wire and we're going to create a detail within the swirl that
we have created with the 1 millimeter 18 gauge wire so again I'm feeding it through and you try
and find a space within the frame to feed it through and watch me very carefully feed the
wire through I don't pull it tight um to begin with I just kind of feed it through so that I
have a placement like so very gently because what I want to do is create another swirl within
that larger swirl so I'm using my round nose pliers and leave a little bit of a space because
that will enable me to create a swirl that will neatly fit into that one millimeter wire swirl
that we have created earlier and as I said earlier just take take your time with that
adjust the fit and the size and where it lies until you're satisfied and then you can attach it
to the frame you can see I'm using a variety of tools to adjust the wire and just be careful not
to scratch the wire obviously and then attach to the frame so I'm happy with that and I am going
to manipulate it some more and you can see me here pushing that newly created swirl into the
existing swirl and I'm going to attach that wire to the frame multiple times so it can't move
so again you need to try and find the gap here and as I said earlier the more you have it added
to your pendant the harder it will get to manipulate the wire and attach it somewhere
as you can see me here fighting to find a space here to feed the wire through and then the wire
tends to look a little bit mangled at this stage and that's where you cut it off and you know use
a new piece for for new designs you can also smooth it out quite easily if you wanted to but
generally I just tend to cut it off right so the last detail so I'm using the remaining eight
millimeter wire and I'm going to do exactly the same thing so I'm feeding this wire through the
bottom swirl and I'm going to use my pliers to feed it in very slowly until it fits into that
gap and this one should be a little bit easier because there's more space and then obviously
don't pull too hard and you can just very slowly feed the wire through and manipulate it like so
and then attach it to the frame at the bottom you can see how easy it is to
manipulate that wire and take your time with that gently squeeze and shape with your pliers and then
at the very end I tend to use my round nose pliers then obviously attach to the frame
when you're quite sure that you have got enough wire to get the shape you want
I've got this ready and I'm going to attach it to the frame we've got a nice gap here on the side
because that was space where we hadn't added anything in yet and you can see I gently pull
until I'm happy and I keep my thumb over the swirl at all times when I'm doing that
so that there's no chance of it moving and then I adjust and fit the swirl into the bigger swirl
and that's what it looks like so far so obviously wrap it a couple of times double check that
everything fits properly so I'm quite happy with the shape so far and I'm going to decide what to
do next so we've got the 0.6 wire from the coil that I hadn't cut off either and I'm going to
bring that up to the top now if you don't have this wire no sweat you can just cut a new piece
of 0.6 millimeter wire and we're going to attach it somewhere to the top of the frame
because we're going to be using that to add the beads so I'm just bringing it up to the top so
it doesn't look very tidy like that but we will trim it off later so I'm just bringing it up and
adding it to the frame so next I'm going to position it so that I am ready to attach my
beads so I'm wrapping it around the 1 millimeter 18 gauge wire that we have created a swirl with
earlier and then I'm adding my beads I'm starting with the largest one because it will fit into the
gap and I'm going smaller until the whole gap until the coil is filled then I'm feeding that
wire through in between the swirl like so and I pull it tight so obviously it depends you know
what gap what size you have and it will look slightly different to mine and so just just
judge that and add as you want and then obviously add this wire to the frame so happy with that
so I'm going to trim off all these wires so earlier I brought this 0.6 22 gauge wire up
to the top so I'm just going to get rid of that sort of bridging and I'm going to cut that off
so that it doesn't look quite so ugly from the back then I'm just using some of the remaining
wires from the top and I'm going to shape this just as an added detail to the pendant itself
this is one of the 0.8 millimeter wires the 20 gauge from the first coil and I'm just shaping
it then attached to the frame and lastly my favorite bit is adding the accent pieces and
there is a video that I will pop a link below in the description where I show you how to make
this lollipop or coil setting for these stones and then we're just going to be adding these
in all the gaps one at the bottom one at the top and attached to the frame somewhere so doing the
same with the top and we're just going to press them into place and attach to the frame now
obviously these ones the top one especially is slightly exposed so once you have attached the
wires to the frame we're going to trim them off but before I do that I tend to use one of the
wires and I'm wrapping it around the setting itself to give it a little bit more reinforcing
so I'm just very tightly wrapping it and this just gives a little bit more structure because
otherwise it would be quite floppy as there's you know too much openness if that makes sense
so trim off all the wires and last if you want to you can dip it into live up sulfur
and give it a good polish obviously be very careful not to go over the stones always maintain
the gap because otherwise you'll scratch them and they they become dull and it doesn't look
very nice so just be gentle with those and just go over the metal if you can you get some liquid
silicone which you could put over them but I tend to be just just very gentle with where I put the
polishing disc so it doesn't damage the stones so just keep polishing until you're satisfied
with the results and yeah that's it that's the whole pendant done I hope you enjoyed this and
thank you so much for watching obviously don't forget to hit the subscribe button because I
upload new stuff on a regular basis I would absolutely love it if you could visit me on
my social media I've got Instagram, TikTok, Facebook, obviously you know about my YouTube channel
and come and join us in our wire wrappers group which is called wire wrappers and metalsmiths
worldwide on Facebook we're a fun bunch and we do challenges every month and it's an absolutely
all-around awesome group of awesome people and as I said I have got all sorts of goodies on my
website so I will pop a link below that's it for me