Hi Guys, In this tutorial I will show you how create a simple wire pendant with a gemstone fringe. I will show you how to create the base frame, create the bail and detail and how to add a gemstone fringe :) Have fun!
We're an artist community (wire and metals) for everyone to share their ideas, post their art, tutorials/events & workshops or ask questions. We are a great buch of artists and have a lot of fun being creative together with challenges and fun projects to create every month.
To see what workshops I am currently running or to get full kits and or loose gemstones, frames for some of my tutorials, square/half round wire & more tutorials visit my web shop:
- 0.4 mm (26 ga) wire - 0.6 mm (22 ga) wire - 0.8 mm (20 ga) square wire
- 10 mm pear or oval flat back cab - 8 mm round faceted stone or CZ - 14 mm pear flat-back cab
- 3 mm beads
Tools:
- Fine tipped flush cutters - Chain nose pliers - Round nose pliers - Flat nose pliers - Polishing materialsMaterials:
- 0.4 mm (26 ga) wire - 0.8 mm (20 ga) square wire - 0.6 mm (22 ga) half round wire
- 10 mm drop or pear bead - Drilled rondelles or chips & nuggets (the latter are in the kit)
Tools:
- Fine tipped flush cutters - Chain nose pliers - Round nose pliers - Flat nose pliers - Polishing materials
Hi guys, this is Nadia from Embodied Crafts and today I want to show you how to create
a pendant with a gemstone fringe.
If you haven't already, hit the subscribe button because I upload new stuff on a regular
basis.
I quite often make kits and PDF tutorials for the videos I've put up on here and I'll
pop a link in the description below.
I also have all sorts of gemstones, square and half on wire, some beads and all sorts
of other goodies on my website.
Last but not least, come and join us in our Wire Wrappers and Metalsmiths group on Facebook.
I'll also pop a link below.
Right, let's get started.
Right, so we're going to start by wrapping our weaving wire around the base wire.
So we're just leaving a short tail of the weaving wire and we're going to wrap it around
one third in from the left.
Just one wrap, like that, or two, and we'll anchor it and then we're going to bring in
the next wire, place it on top and all we're going to do is wrap around both wires twice.
Now make sure you don't go too tight because we need to have enough of a gap to come in
between these two wires here, like so, and do three wraps like that.
You can do more if you want a bigger gap in between them all, but I like to do three.
So then we're just going to continue with that, two, and then two, and then when we
get to about three loops at the top, we're going to wrap around the bottom wire once.
We're going to bring in a third wire.
I'm just going to slide that in underneath and what we're going to do here, we're just
going to wrap the weaving wire around the two bottom wires, once like that, twice, and
then we're just going to bring the wire back up.
We need to try and maintain the same gap, so you can see that I've done one loop around
the bottom wire, or the middle wire now, and then two around wire one and two.
I'm going to call these one, two, and three.
So now we're just going to continue with the weave as we did before, so we're going to
go around wire two and three twice, like so, and then we're just going to go around the
base wire, or the middle wire, three times, like so, make sure that this is zoomed in
and every occasionally, so often I'll bring it in, you can also give it a bit of a squeeze,
that will flatten things nice, but very gently, and then we're just going to continue with
that, so another two, and then three, two, three, and I do like to bring this in, and
then I give them a squeeze, because I like to have the wires lined up, so then again,
after we've done three, so I need to do one more, like that, so once again, once, and
then we're going to repeat that, we're going to go twice around wire one and two, bring
it back up, like so, and then continue with the weave, and we're just going to do this
for a few revolutions, not sure how many yet, and I'll come back and then we'll do the
next step, and that's what it looks like at the moment, right, so I've finished up, and
I've ended up the weave on each side the same way, so I've made two, and then three wraps
around the middle, that'll tie it off nicely, so what we're going to do next, is just shape
this into like a half round kind of shape, so just gently use your fingers, and try and
keep the wire nice and flat, I'm just going to go around, try and keep it even, so that
it's a nice sort of round shape, like that, there we go, so it looks like so, okay, so
next we're going to, just going to flip this over, we're going to use the innermost wires,
it's going to create a swirl here, and then swirl with the second,
obviously we're going to do the same on the other side,
I'm going the wrong way here,
then obviously just take your time and make sure that they are symmetrical,
and you can take the pliers to help you, and you can very gently adjust and squeeze
until they're roughly the same, and do the same with the next one,
I'm just going the wrong way again, goodness me, a little bit of a cold,
so I'm not quite, I'm not quite concentrating properly, so
so now the wire is a little bit warped, so I need to try and make sure I can
straighten it out again, very gently, when this happens, just don't put any pressure on the wire
at all, this is going to mark it, but also it's going to work hard, so I'm going to try and
manipulate it as little as possible, until you have actually bent it, that needs to be in front
of that, right, so now, picking this up, there we go, that's better, so you can obviously adjust
now, before we finish up, we're just going to adjust these to make sure that they're symmetrical,
I'm just trying to go do a little bit of a weaving effect, I've done this before,
so let's see if I can slide this wire over, and that wire under, it's kind of like a
weaving effect, let's see what that looks like, see that needs to come over,
this one down a little bit, I've done this before, this is all a little bit of a guinea pig thing,
you don't want to change the kind of shape,
I think on the last bit, you need to bend the wire down,
it looks okay, let's see where this takes us, I'm going to fix this up a bit, so basically
this wire, the left wire goes underneath the first wire, and then over the top,
and on the other side, the first wire goes over the top of the first wire, and then underneath
the second one, like that, okay, so I kind of lined up the two wires at the top, I had them
crossed, but I think it's better like that, because we need some wires to actually make a bail with,
so I'm going to take some half round wire, and I'm going to wrap this around
those two wires at the top, start here, I just can bend these out of the way,
I don't want to manipulate the two center wires too much, just give it a good pull,
and then wrap the half round wire around the square wire, and I quite like to give them
a little squeeze every now and then, not too hard, just to set them against,
and flatten them against the square wire, and this is the reason why for bails like that,
I like square wire, because if you use half round or square, it flattens out nicely against,
against it, so I'm going to push it in, so I'm just going to keep going with this for a little
bit, and you can see that kind of holds us in place, we're going to do a couple of centimeters
of that, and then that's going to be our bail, okay, so I've wrapped it, you can make this as
long or as short as you want, it just depends how big you'd like your bail to be, so I'm going to do
next is just slightly bend this forward, and I've wrapped, you can see here the half round wire,
just to anchor it a little bit more, I've wrapped it around one of the legs, and then it's going to
give just a slight bend forward, and then you can either use a mandrel, or you can use your fingers,
I'm going to slightly, actually no, because I'm going to wrap this round, so
I'm going to shape this, I'm going to trim this off, this little wire here,
I'm just going to shape this down, I'm going to bring these wires through, I'm going to keep them
straight, and I'm going to attach these wires to these wires, all right, so let's do that,
so what I'm going to do then, is I'm going to slightly bend these forward,
so that when I bring this wire down, they don't sit flat, and then you're going to just line
this up like that, you can adjust this at a later stage, that's what it looks like at the front,
so what I'm going to do next, is bend these open like that, and then we're going to take
these wires, I need to be careful not to change the shape at the front too much, so I'm going to
bring these forward, I'm going to wrap these round these legs, and you can just trim these
off a bit, because we're going to loop this wire around this wire,
when you're doing this, just keep checking at the front, that everything is still straight,
so far so good, and then we're going to attach this, I need to go get my glasses, because I can't
better, so now you can loop this wire, I'm trying not to put too much pressure,
you don't want to distort anything, so just very gently squeeze, just like a couple of
millimeters at a time, and that's where your fine tipped pliers come in really handy,
because you can reach into these sort of narrow spaces, let's bring this up a bit,
and kind of rotate the wire around, rotate the pliers with the wire around the bend,
then grab the tip, and then squeeze, hard to get to, but eventually you'll get in there,
and that's all you need, you don't really need to do too much, as long as it's hooked on there,
and we're going to do something with this wire here, so it can't slide off, so quite often,
you know, when I remember when I first started, I was terrified of cutting off any wires, without
having wrapped it at least a hundred million times, because I thought, like with cord,
it'll just come undone, but wire will just stay, and as long as everything is, you know,
secured away, it doesn't have a chance to hook open, or anything, or there's not too much pressure
on things, or pulling power, it'll stay, so that'll do, and then we're going to do something
with this wire, to make sure it can't slip off, so now we've attached one of the wires,
and we're going to be doing the same with this wire here, and all we're going to do,
is again bring it around, and just make sure it doesn't distort too much, you want to keep that
nice shape at the front, so you kind of bring it round, and to help you with the shape,
you can bring, you can actually cut that off a bit, so that you have more,
through, there we go, so that'll already make it a bit more round, like that, and then
you can just come in here, and trim it off, and then you can now, you have the ability to
close this off, however you want, and then still slide it along, this little wire that's
left, so as you squeeze, just rotate, and now you've got this little detail at the front,
and you can adjust the wires, if something doesn't look quite straight,
just kind of adjust it a bit, until you're happy with the symmetry,
right, so I've arranged it, and you can cut off these wires if you want to, we don't need that
long of a wire, but we can use them for beads later on, so I'm just going to leave them for now,
so now we have these wires left at the back, and we need to put these away, so that
these can't move, so I'm going to do, so I'm going to bring this one through the loop here,
like that, you don't want to pull too much, otherwise you're going to distort
the pattern at the front, so I've got this coming through here, and I'm going to create a little
detail at the front, with that tiny little loop, like that, so far so good, I'm going to be doing
the same with the other one, I'm going to bring it through, like that, I'm going to bring this wire
around the front, try and keep it flat, like that, I'm going to follow the shape of the first wire,
bring it around, like that, and flatten it a little bit, I'm going to create a loop,
a little bit work hard, and so it can get a little bit tricky,
in actual fact, I think I'm going to cut this up, just leave it a couple of
millimeters, and even more, because we're going to create a tiny little loop,
and then we've got the tip here, we're going to do this gently,
give it a squeeze, and that'll thin it out a bit, and then you can just rotate it,
and grab the end, and we just very gently roll it in, to create a little wave,
just make sure it's nice and central, and then we've got the other wire,
make sure it stays flat, at the moment, that's what it looks like, so you can see,
so now, I'm just going to fold this up, and I think with this one, I'm going to go
on the inside, like that, and press it down, to try and make it as neat, and as tidy as possible,
and as flat to the bail, as you can, because that will give it more structure,
and if there's nothing that is loose, that can sort of move around, it'll be much sturdier,
right, so, and then the last step is to, if your wire is any longer than this, just trim it off a
little bit, and to suit, obviously, these kind of designs here are pretty much organic, and you know,
the size of your swirl, the size of your bail, all of these things will be different,
make sure it's zoomed in, and then press it down, that's kind of what it looks like,
in a moment, and then we've got these wires, actually really annoying, but as you know me,
I don't want to cut them off, so at the moment, I'm just going to leave them,
and that's what it looks like at the moment,
you can see at the back, these ones are wrapped, I'm going to kind of attempt to
squeeze these together, I obviously don't want to distort the front, so you can try,
you can see them from the front, which I don't like, so you can kind of try,
but a little bit at a time, to kind of rotate them in a little bit, just so that they don't
show up at the front so much, and that's not too bad, so that's that, okay, okay, so now,
I'm just going to go back, and we're going to twist these remaining wires, and I think I'm
going to come through the front, so these are going to be symmetrical, so the same on each
side, so try and keep these wires as flat as you can, so that the square wire doesn't sit up on
edge, come through, like that, and you're going to give it a swirl to bring it through, like that,
like that, and kind of make these nice and round,
and just kind of find the shape that you want with these, there's so many
different ways you can loop them, like a swirl, like that, I mean you can arrange these however you want,
I don't think I actually kind of like this wrap, but yeah, so maybe I'll just cut it off, but you
get the idea, you can use the square wire and do whatever you want with them, and I think this
looks actually a bit messy, I don't know what I've done there, so I think I'm going to end up cutting
these off, because I don't like it, but yeah, you could do that if you wanted to,
right, so I ended up cutting it off, because I just really didn't like what I was doing with
this wire, as I said earlier, obviously you can make much more beautiful patterns than I was just
doing just now, but I ended up cutting it off, I think this flu is getting to me, it's going to be
an interesting teaching week coming up, let's hope, so here we go, so I'm just going to twist this
round and round, so the more work you do when the wire is long, the less hard you're going to have
to work when you're trimming it off, but obviously there comes a time you need to trim the wire a
little bit more, like that, and then use your round nose pliers to twist the wire in, and then
flatten it against the frame, obviously make it so that it's tucked away and it can't get hooked on
anything, and then that's the front, right, so that's that, so I think after all this hoo-ha I'm
going to end up cutting off these wires anyway, because they're really annoying me, so I'm not
going to be using them I don't think, so we come in here and trim them off securely, we're not going
to be using these wires, because we need some finer wire now to add some beads, so we've got
this pendants done, and now I want to add a little bit of detail, so what we're going to do is take
some, so we're going to be using some more 0.4 to attach the details on the outside,
and just find an anchor point, it'll go through, because obviously it's the gap, it's fine if it
doesn't go through, because here what I normally do is take a needle, and I come in from the back
like so, so that any marks that I may make with this are at the back and not the front, and we're
going to open up the gap a little bit like that, so now the wire should go through better,
so now they go through, so we're just going to create an attachment point, and then what we're
going to do is just add some beads, so I've got these rondelle topaz,
they're not sparkly, you can use seed beads, but you can use
pasted beads, or anything else, or just copper beads, what you do is kind of stitch them
to the frame, like that, you can add as many as you like, so you want to make sure that they're
sitting up on edge, like that, give them a wrap, come through, and then just widen the gap as you
go along, just keep adding, there's a bit of a knot in here, just keep kind of, it's kind of like
sewing the stones in place, and then they sit up on edge, and we move on to the next one,
down, through, and then stitch it in place,
so that's kind of what it looks like, so you're just going to continue until you've gone all the
way around, as I said you can use seed beads, or pasted beads, I've got rondelles here,
but yeah, you can use anything, as long as it is something that you enjoy,
okay, so I've now added the sort of fringe, and you can, as I said earlier, you can use seed beads,
and you can use chips and nuggets as well, it's quite nice to have an irregular frame as well,
so I quite like the rondelles with a little bit of faceting, because of the light, it's nice on them,
so now you can, you know, add some beads or so, and what you can do as well is maybe
take a jump ring, if you wanted to do that, you can fill the space, I'm just going to open that,
and then maybe bring it up here, and then hook a jump ring through the centre,
and then maybe just add a drop, or a bead, or whatever you like to add as a dangle
in the centre, and then just close this off, and that kind of gives you like a little
sort of accent in the middle, I think I may need to make it a bit short, it's a bit long,
so you can make the jump ring shorter, or add a different bead or so, so that's what it looks
like, I quite like it, so yeah, that's up to you, so that's the whole pendant done,
I really hope you enjoyed that, and thank you so much for watching, as I said earlier,
I've made a kit for this, so you can find this on my website, or on my Etsy shop, alongside all
sorts of other goodies, like copper beads, wire, gemstones, and amongst other things,
if you feel like it, come and join our artist group on Facebook, which is called Wire Wrappers
and Metalsmiths Worldwide, we're a fun bunch, and get up to all sorts of interesting things
in the group, also if you feel like following me on any of my social media, I've got Facebook,
Instagram, TikTok, obviously my YouTube channel, I'll pop a link again in the description below,
all my handles, and all my platforms are, or is in Barney Crafts, so just follow that, and
find me on there, and that's it from me, thank you so much for watching, hope to see you next time!