An easy way to clean the tool from the old solution.

Pavel Sidorik. Renovation and Finishing
79 followers
41 Video Views·Dec 11, 2022
In this video I'll show you a simple way to
clean a very dirty tool with little effort
Actually the old dead putty will be as
good as new from the store
Hello friends greetings to everyone it's Pavel Sidorik as always
and this is a channel about repairs and finishing
In my project the renovation of an apartment from Ada we have already
completed all the rough work so I decided to do one important thing
Thing is namely to tidy up all the trowels
I generally have two categories of tools
The tool that is always completely clean and the tool that is
used for rough work which I
occasionally hit and therefore it ca
Be dirty
I know that home experts will start writing now
Home couch experts who say the tool needs to be washed
and all that the tool should not be in the master's hands
Dirty and that's it
In reality it's not always possible to keep the tool clean
In purity at least because it also depends
on the solution you are working with
If you are working with polymer filler regardless of
You washed the trowel didn't wash it then washed it forgot left it
If they didn't wash it that is any variations this compound
is always completely removable with a trowel at any stage
Here is a trowel with a week-old filler
and without any effort the trowel was cleaned and if
Just soak the tool in water and then you can remove
everything with your fingers and it will be clean
But if you are working with plaster with
tile adhesives with some unknown mixtures
such as waterproofing a gypsum film is formed
that adheres to the metal and if you use a trowel
You will wash it say every 2 hours then nothing will happen
but if you don't wash it for literally half a day it will form
From above there is a
film and it is getting bigger and bigger every day
And since you are scraping the trowel against the metal it gets scratched
And thus the plaster falls into these
microscopic scratches and forms a film like this
You won't be able to clean it
off as easily as polymer filler
It can be wiped off but it will simply be a physical removal that
is not the dissolution of the material but just a physical removal
You will be able to scrape this material off the trowel
If it is a cement mixture then accordingly physically
It will be hard to peel it off
There is not always the opportunity to wash this trowel in time
Because when you have a choice it dries out for
example the wall sets and you need to trim it of course
Just throw away this dirty trowel and go trim
the wall and forget that it needs to be washed
Therefore it's not always even the tools of good masters
are all clean As I already
said I have a category of tools
I can nail it with a clear conscience because
this tool these trowels are already crooked
They are crooked and are only meant for rough
work Therefore I will now
show you how these are completely dead
Dirty spatulas can be cleaned in a simple way
Friends I want to tell you about an international award
The best roofer from Technonikol
Contestants can be both individual
and professional builders
There are nominations for roofs and foundations
Winners receive the title of the best craftsman in their
gifts from partners and recognition
in the professional
field Learn about the list of nominations and apply
You can apply on the award's website the link will be in the description
If you are a bloodletter then apply sooner participation is open
Free you can register until February 28
If you are not a construction worker know that on the site
The best contractors in
Russia and the near abroad are
gathered and now you know where to find specialists
building your own house
There are two ways to clean
this tool
The first way it is dull but many people use this method
They are used
I don't recommend it but I'll show you anyway
This is a method of mechanical cleaning
You can sit there for several hours peeling like tha
A putty knife
You can take a grinding disc with sandpaper attach it to
a grinder and then clean the putty knife with the grinder
You need to find the gloves first
They were found
Alone
Ugh
The trowel is cleaned but at the same time the blade
itself is damaged scratched and a layer of metal is removed
After all with this method you won't be able to clean the
handle properly it will just get damaged from the angle grinder
I don't recommend this method but I'm just showing it
The second method I recommend is chemical
Soak the tool in a mild acid leave it for a day and
after a day the acid will dissolve all the solution and
The tool will be clean it will only need
to be slightly washed with a brush or cloth
The easiest thing to find is citric acid
It's worth a few cents
three of these pouches cost three Belarusian rubles
This is about 100
Russian rubles well
practically free What else do we need
The container where the longest tool fits so that
it is covered with a solution of acid and water
The container does not necessarily have to be clean because
a dirty container will be rinsed again with the acid solution
We will also need boiling water
Boiling water will speed up the process
I pour the acid into a measuring
cup to dissolve it in water
She's already a
bit crystallized from the dampness
I'm pouring water I need something to mix it with
I'm mixing the solution
with a small mixer it's a universal gadget of mine
Look the reaction is happening it's bubbling and it smells like lemon
And all of this we pour with water
I arrange the tool in such a way as to pour as
little water as possible so that there is more space
concentration of citric acid
Okay the reaction is going there are bubbles forming
That's all I'm covering with polystyrene until tomorrow
The next day I arrived at the site
About 14 hours have passed and now let's see
What happened to our tool
Generally the longer you keep the tool in the acid solution
the better
We definitely take the gloves For
14 hours a good result but of course
it's better to keep the tool in the solution for a day or even longer
We brush
away the remaining flakes it all basically falls apart
Everyone is leaving
I remove the remaining solution and rinse the tool
As from the store
Spatulas that didn't wash off I
left in the acid for one more day
Well everything has peeled off even the non-glossy tile adhesive
What result did I get Basically all the
putty washed off and they
became like new
The harder it is to clean even not
cement-based but modern cement-polymer
These adhesives meant for facades which
I used to stick the mesh on are one side
Even some places didn't come clean
Either rub them well or scrape them off mechanically
And in principle this method works I recommend it
The costs are small the only thing needed
is some container to fit the longest items
If you take things like a pipe then such a
pipe can be soaked in acid using a fire hose
You can take a fire hose pour acid into
it insert it into the pipe and soften it
But I don't see the point in washing
the blade why Because
the blade is a consumable item you can just throw it away and buy a new one
So I don't use that method
The longest one I had was this kind of iron
If using trowels for mechanized application
of filler they are from polymer filler
They are cleaned and very easily so
The entire result of the tool's cleaning is before you on
the table
In my previous two projects namely
plastering the window frames and spackling the wall
The ceiling for painting I didn't submit
the estimates for work and materials
It's time I've already calculated those
who are interested can check the numbers
Well the video has come to an end if you liked it
of course give it a like and subscribe to the channel
Click the bell
Wishing everyone a good mood see you again soon
