Тонкости покраски стен! Решаем распространенную проблему.

Pavel Sidorik. Renovation and Finishing
79 followers
5 Video Views·Dec 11, 2022
Hello everyone this is Pavel Sidorik speaking
Right now I am doing painting work
They painted the walls with the first coat
There is a common problem
when painting the walls
This is especially characteristic of airless spraying less
so with a roller After
you have painted in two layers
If you run your hand over
the wall the wall is rough
Some grains hair-like particles
they solidify in the paint
And it turns out that the wall is like sandpaper
This becomes especially noticeable after painting the walls
using the airless spray method
After the roller to a lesser extent
What to do How to achieve that
How can we ensure that the walls are perfectly smooth after painting
Suppose when the customer arrives
he will touch the wall like that
So that he doesn't make any claims against
you there are some defects on the wall
They are not visually visible but they can be easily felt by touch After
applying the first layer
Suppose they sealed everything applied the first
layer using airless spraying
and let the paint dry
After that take regular sandpaper
fine say 240 just
any whatever you like
and just gently brush
the walls knock off
all the grains all the hardened particles
You can check by touch that is you run your hand over it you found it somewhere
They fixed it wiped it all off everything
After that you apply a second layer of paint
and the wall becomes perfectly smooth
No matter how hard you try
to wipe away the dust before
painting vacuum and prime tiny
particles will still remain
They dry and become sharp
they form
Therefore there is only one solution
to take fine sandpaper
After the first layer it will pass
through and after that you will have
the second layer of paint lie
perfectly Thank you for your attention
Pavel Sidorik was with you
goodbye until next time
