Building the Catalina Wherry - Part 4 - Final Design & Offsets

Nomad Boatbuilding
98 followers
3 Video Views·Nov 6, 2022
My website: https://www.nomadboatbuilding.com
Instagram: https://www.instagram.com/nomadboatbuilding/
It's not about the money but living isn't free...
Products featured in this video:
Buy some merch: https://www.nomadboatbuilding.com/shop/
Support these videos with monthly or annual pledges at Patreon: https://www.patreon.com/nomadboatbuilding
Or make a one time donation: https://www.paypal.com/paypalme/nomadboatbuilding
Welcome back to Nomad Boatbuilding. I'm Mark Rutten and we're building the Catalina Wherry.
In the last episode we thought we had our design done. Well it seems we had some slight
failure to communicate. Let's check it out. In the last video we managed to get this design
down to this version where I had basically five planks. Two top sides, two underneath the counter
of the transom and then a single garboard plank. I thought we were all honky-dory and
the thing of it is our client Joe he's actually a merchant mariner. He went off on the ship just
as I got this done or just before I got this done really. He sort of liked where the design was and
we decided to make a few characteristic changes and then I launched into doing this version which
put out our video about doing it and then he sent me a text. He just hit hawaii or something like
that and managed to check up on his emails and he said whoa wait a minute I didn't want five
planks I wanted seven planks. Okay no problem. So we had a little miscommunication there and
unfortunately I had already done up the five plank version which is the one that we saw the video of
so I had to go back and redraw it. So I went back and revised our drawing came up with our
seven plank version here this would be version number six and just as I sort of got done this
I was like you know there's something about this that is bugging me. Remember how in the last
episode I mentioned creating a master grid underlay in order to help prevent dimensional
creep? Yep that would have been smart. So I sat down and I started measuring a few things and I
realized that we had slowly but surely kind of ballooned beyond some of the basic dimensions
we started out with and we had grown from what was supposed to be like a four foot wide boat
to something that's like four and a half feet wide and it's just like little tiny like
tweak the line here it'll tweak the line there and kept going and growing and so I thought I
decided I was going to stop and just back up back up and start from scratch put away version number
six and started on version number seven. Now I've got our arrangement plan on here which is what I
was going to talk about let me just peel that back for a second. So version number seven we've
gone back to basically the original scheme I think I've recreated the transom that Joe wanted
we've shrunk that beam back down to it's it's actually just a little over four feet it's
it's four feet two inches. I squeezed the transom down a little bit because it had
slowly widened out a little bit too much as well. I think I got the bilges down a little slacker
they were getting a bit a bit full in the bilges and so it's a little more rounded now
and I played around with the shear just a little tiny bit too because it was feeling a bit funny
the way it was so anyway I uh so we got back we got to this version version number seven.
This is it we're not changing the lines anymore and so I thought I'd talk about the arrangement
plan. The interior of this boat is going to be kept fairly simple so we've got a port riser
of course running all the way through we're going to do three basically sawn frames or they'll be
laminated running through the midship of the boat close to the rowing stations one center thwart
that's actually Joe wants one that's like really deep so we're making this like 16 inches wide
which is crazy wide compared to most boats which usually have thwarts of about like nine inches
wide a lot of the time or even less but Joe likes a big comfy seat and he likes to put a padded
cushion on there so he requested this big wide seat so we're going to put that in and then he
wants just a single station for rowing forward but doesn't want a thwart there all the time
so what we came up with is basically a seat frame much like you would have in a canoe and a panel
that sits on top of that that is the seat and so when Joe wants the forward seat he lifts the panel
off of that frame and it will fit into the forward position leaving the framework in behind now to
the outboard sides of whatever width we need for that front seat we're just going to have a couple
of little shelves built into the seat frame so they're going to sit the shelves will sit down
below the frame the panel will sit on top of the frame and the frame is basically like hardwood
one by twos or something like that and so that's going to give Joe an ability to move that seat
when he needs it and he'll have a little bit of this little shelf unit which is basically like
storage for like a water bottle and binoculars or whatever it is that Joe needs to keep readily at
hand his sandwich or gummy bears or whatever so the thwart risers fasten to our frames our three
frames and then but to carry it through the full length and Joe wants it running as long as possible
and he likes to use it for hand holds we're just going to make up like little lugs sort of like a
short section of frame that will fasten into in between these locations in order to carry that
that rubber rail or that sorry that thwart riser now we're going to put a second riser down low
just above the floorboards smaller in scale but that's going to be basically for lashing stuff
too so we will again use lugs to fasten that in place and that's because Joe wants to put
flotation in there and he wants to fasten it down low along the sides of the boat and so he
needs something to fasten that to so he'll have lashing points between the thwart riser and this
lower rail then we're going to do floorboards that are going to drop down into place they're
going to sit in between the frames probably run level out towards the ends of the boats but they
might run I might elevate them but we'll see what we can do about that and then Joe likes a really
deep breast hook apparently he likes to step onto the breast hook first when he gets into the boat
off of a dinghy dock so giving him a breast hook that's like a full 12 or 14 inches deep
and we're going to have quarter knees back here that actually wrap all the way around
and bridge across the transom so that's going to increase the strength across the transom and
really tie those two sides together nicely instead of painter rings being bolted in we're going to
just hole through the planking behind the stem up forward and holes through the transom underneath
the quarter knees so he can run a bridle off the transom for dragging a drogue in rough weather
and or he can run an anchor through the through the planking around the back of the stem
if he wants and then we're going to put a false shoe on the bottom probably
solid hardwood probably oak or something like that that I'll likely put in place either with
epoxy or with flexible polyurethane and the idea there is that we've just got a really tough bottom
that can take a lot of abuse without having to worry about damaging anything that water can get
into so it'll be like maybe three-eighths of an inch of oak or something which could take a real
pounding and if it were fiberglass for instance yeah you could fill up the fiberglass but you're
always worried about that when that thing finally wears through someplace and then the water is
getting into the core of your your bottom which is going to be plywood so we'll be eliminating that
problem in fact we'll probably glass over the garboards and bottom in one piece just like I
that's mostly to put glass onto the garbage themselves but if I'm glassing that I might
as well carry it right the way across unless I decide to glass the planks before installation
I haven't decided on that we'll glue on that hardwood bottom and should it need repairs you
do that by doing dutchman or you you could just shave the whole thing down to the power plane and
re-skin it with more hardwood so that's where we're at I'm ready to loft because I've got my offsets
done I'll set up my lofting board and we'll get cracking on this one when I use the term
lofting I'm referring to two different things but they're really the same thing in the first
case I'm referring to the process we use of creating a drawing of our boat with three
different views if done accurately we can create a set of coordinates from those views
that we call a table of offsets let's take a quick look at the table of offsets and how we record
that a table of offsets is really a numerical chart that plots out all the intersections
that our boat has in its relationship to a grid that we create so we have station lines and in
many cases we have water lines too a baseline we have a center line I'm not using any water
lines in this particular boat because we're using the plank lines themselves which certainly adds a
complication to working up the lines on here and that's because none of these lines are straight
you've got them curved in two different directions and I need to make sure they all juggle together
to coordinate and look good in fact they got to look good in three different directions I got to
look good in the profile they've got to look good in the half breadth and they've also got to look
good in our plan view or our body plan so everywhere that one of these elements crosses
another element we create an offset and so that's what I'm doing right now I'm going through
the grid here basically one station at a time and I'm picking off the half breadths of each
plank line as it crosses that station and I'm picking up the heights of each plank line as it
crosses each station and the heights are above a baseline half breads are from a center line
there's a system of nomenclature that we use when we're creating half breads and the standard
nomenclature is referring to each of these intersections in the form of a number of feet
a number of inches and a number of eighths of an inch because of course in the imperial system
eighths of an inch is sort of a very convenient size to use and some will actually go down to
sixteenths or 30 seconds sixteenths is as really accurate as you need to get because
often that's like the thickness of your pencil line when you're working on a full-size lofting
it's a very fast way of being able to write something down quickly and simply that's easy
to read and hard to misunderstand and you could call it out across a room if you're doing it
if you're lofting a very large boat and you had one person reading it offsets and another person
marking them down on the lofting floor you need some way to to communicate that in a very clear
way that doesn't get fuddled up in if it's a noisy environment of a shipyard for instance
so anyhow I'm working at the offsets for this particular boat here still and so I'm going to
work on station three if I lay my scale along here I've already done my shear plank looking
at the half breadth of the next plank lap down so here I've got one foot so I can put that down
one and then eight inches eight inches and then we look at the portions of an inch and this is
where it gets a little trickier because we switch to something we're not used to thinking about
so the number of eighths in this case looks like I land just above four eighths but not five eighths
so I would say four and then we use a plus sign to indicate a little bit more or a 16th more
and sometimes people don't use plus signs sometimes they'll use the next number and use a
minus sign but I use a plus because we use these little we often have a little dash between numbers
so that can get confusing to use minuses as well so then I go down to the next plank and we get
one foot again now we are at uh what I messed up this one was the one before here
four plus this happens when you're trying to do too many things at once
that this guy is one ten and not quite an eighth so I would say zero plus
next one down this one this one this one now we're here so we are one five and this looks
like it's three quarters so that's six one five six eighths next one down is one three and nothing
so one three zero and then drop my scale down here the last one and so now I know I get zero
because I don't have any more full feet and six and it looks like six again so simple as that
and it's a lot easier if you can imagine than convert from feet to all inches or inches feet
and inches and fractions so this just brings it down to a very simple method I really like the
system uh it works well little room for making mistakes so long as you can quickly in your head
switch from thinking about you know quarters of an inch or three quarters or half an inch to
the number of eighths within each of those divisions now the second use of the term
lofting refers to taking that table of offsets and redrawing the boat full size on the loft
floor and that's what we're going to do in the next episode so please join me again I want to
thank you all for watching and I want to thank everybody on Patreon who helped support this
channel if you could help me out on Patreon I really appreciate that you can find links in the
corner or down in the description so until next time get out of the workshop get your hands dirty
have some fun I'll see you later folks
