LEAVE LESS TRACE! This is a story about how we can make less of an impact if we are going to make one. We put a lot of thought into this project and were able to remove 20+ bolts and install only 6 bolts on the Lost Arrow Spire tip that serves everyone's needs, climbers and highliners. We did it all by hand with an amazing team. Bobby Hutton, Alonso Rodriguez, Kyle Lovett, Greg Kommel, Nick Day, Ryan McBurney.
I am on the Lost Arrow Spire with my friends.
We are socially distancing from people we don't like.
The bolts up here are shit and we came up here with a seven-man team
and I brought DeWalt and Makita, my friends.
And we are going to power through hand drilling the Lost Arrow
and re-bolt this whole thing and clean it up.
Watch us do all this on this episode of...
It's really hot.
Time not to highline.
Hi, I'm Ryan Jinks and welcome to Yosemite National Park on the Lost Arrow Spire.
I instantly changed friends up here and now we have Milwaukee
and we are going to fix some stuff.
Alonzo and Greg went back up to camp.
They're going to tape the highline for this
and Bobby and I are going to plan on what we're taking out.
Which is all of it.
And what we're reusing which is not all of it.
There is so much crap up here.
Let me give you a tour.
So Dean Potter used these eight bolts.
Oh my god!
In order to use his winch to rig this line which had like 5,000 pounds of pressure.
And so what we're going to do is remove all of them and reuse maybe two of them.
And I'm thinking maybe these two or these two with the fixed glue and bolts.
We'll explain why we're going to do two, two, and two.
And that's it.
Because you can see how much crap is up here.
Even right here I just noticed for the first time is more crap.
And then we have some random ass hole.
Another random ass hole.
Whatever the hell you want to call this.
We've got some quarter inchers here which will just bang back and forth.
That is bad.
That is bad-ish.
And this is what all this tat is.
Now this is not all of our gear.
This is the highline anchor.
But this locker and everything is all tat.
And all of this padding under our anchor is stuff that's permanently up here all the time.
It looks like crap.
So we're going to put an official repel ring station so we can repel off of right about there.
And then two bolts for that line.
So we're going to clean this whole thing up and we're going to show you as we go.
So the reason we're doing two bolts is because these fixed glue and bolts whenever we
test them in bolt busters are super strong enough.
And it's insane to put three, three, and three up here when we don't need them.
So what we're going to do after you rig your highline off of two bolts
is you can take the tail or extend off something and clip it to these two and these to these two
and just have something everything interconnected.
And on those sides over there we're also doing two bolts.
All we have is Dean's bolt and cams and that already has four bolts.
We're not going to change it.
Those are glue-ins.
Plus nobody sees those.
And that is fine because the repel ropes are the backup.
We don't need to overkill these anchors if we have a safety factor of 10 to 1 or even 20 to 1
because this doubled up into a sliding X of 100 kilonewtons.
We did that brake test and it blew our minds.
So it's redundant, strong enough, safe.
Only six bolts up here and everything cleaned up is the goal.
Sure hope that goes well.
Let me know about what you think about my audio
because we just don't have enough stuff with us to deal with.
Maybe next time I can bring a mic.
So this is a stainless coupler and this is a coarse thread.
That's what all these are is coarse thread to the fine thread.
And fine thread goes to his doodad that removes bolts.
And this it's nice to have multiple couplers.
It's not like they weigh much.
Let's see here.
I got it to work a second ago.
Hey there we go.
Sweet.
It bottoms out that should have enough threads
but we can pull this up after we spin it by hand here.
So this one will also work
because we've got just so many to take out that we need this to work.
So in national parks you cannot use power tools.
And so for the longest time I was not sure how we were going to do the Los Deros fire
because there's so much to do up here.
We want to do this right.
We want this to be clean and proper and follow all the rules.
And so we basically brought a lot of muscle.
So I believe we have Ryan and Nick up there right now drilling the 3-8
hole for the rappel station.
And then once we figure out what we're doing here and clear out some stuff
they can come over here and hand drill whatever we need.
It takes like two hours to hand drill a half-inch hole.
However, it's okay when you have a loud enough time and you have your friends here.
Now what's great about hand drilling is it has been one of the motivating factors
to only have two glue-in bolts per anchor
because it keeps it to a minimum of what you have in here.
If you use a power drill, I don't know, you might end up with eight bolts.
So this is exactly why power drills are not allowed here.
Anyways, removing them by hand is not terribly hard with the doodad that he has.
Here's our doodad.
And the problem is it's ideal to be able to power spin these to score the cone at the bottom.
But we found that hand spinning has worked.
So we're just going to take the extra time and we still get to highline.
It's a really fun trip with really good people.
So we're just nicknaming everybody the power tool names because we think that's really funny.
So we got a little bit of moisture down there and then we got it started moving crescent wrench.
Now it's spinning freely.
And we're going to do this until we're sick of it.
We're going to add some more moisture when it comes across the line to us.
And maybe 10 minutes of this.
I'm just beating off my quarter inch bolt here.
It just surprises me how easy this is.
When some people just lay it over and they don't do anything with it.
Cyclic loading, man.
Hey, ow, that's hot.
So that's pretty cool.
We'll get the quarter inches out here in a minute.
Bobby's almost done with that.
And then I'm going to start tinkering with what it's going to take to get these guys out.
Wow, that's split in half.
That's insane.
That's before we started hammering.
Oh, is that?
Okay, we got something for that.
Cool.
That is a button head on a leaper.
How you doing over here?
So I've been spinning that for about 10 minutes.
Okay.
And we're going to see if what we've done so far is enough to get this bolt out.
So we're going to...
What happens if you don't spin it?
You're just fighting the cone.
Yeah, you're just fighting the cone.
I don't think this would be able to pull a half inch bolt out.
Gotcha.
With 3-8 bolts, it would break the bolt if you put enough pressure on it.
Gotcha.
So that goes down to the rock.
And then...
And this is not very much pressure that I'm applying to it.
You did a good hand job screwing that.
No way!
That was way too easy.
Did you score it?
I don't know that I did.
You should almost try the next one with that.
So the idea is that you would score it so that doesn't...
That has a notch to not engage.
Maybe you compromised the rock in there.
I wouldn't have been able to compromise it all the way up.
That's true.
Yeah, just at the bottom.
This is kind of grainy at the top, so...
But I mean, everything else has been good.
There's no hollow stuff up here.
Well, that's awesome.
We'll be able to pull all these out.
We're going to reuse that hole for our gluons.
So we really want to put a lot of thought into the location of where we're going to
put these bolts because they have to be compatible for climbing,
for climbers coming up and rappelling off for the Tyrolean and for highlining.
So there's a few compromises for both parties in order to have minimal stuff up here.
The bolts right there are a little too far back to make this good and it's already off level.
So what we want to do is get this up a little higher and we're thinking about putting some
bolts here to make this a lot better for the highlining situation and for the rappel.
There's a lip down here that you can step on in order to get on the rappel or the Tyrolean
and it'll work really well for both.
We're going to put wrap rings on there and it's going to be exactly right over the edge.
So we're going to put a lot of thought into exactly what we want here.
If it's that far back it's just going to suck.
However we are going to be able to reuse both of these holes that we have here
because we did a test anchor.
Obviously we're not going to build an anchor like this.
We wanted to see how it would feel to build it.
This is a 240 centimeter sling and a double sliding X
and so this is I think 100 kilonewtons in the configuration it is.
And this bowl shape right here keeps the line from wanting to grind down
every time you bounce the line.
So this will actually keep it in place and reuse these holes
and everything else will get removed here.
So it'll be these two, something over here and then the stuff Bobby's working on over there.
This stuff will be here the entire 21st century because it'll stainless.
It'll last a long time.
So we really want to really want to think about it.
I try to reuse the original stuff but there's so much crap that we kind of just have to
start with a blank slate at the same time.
So harvard freight's finishing one hole over there for us.
Bobby what are you doing?
So I am pulling some of these rusty 3-8 studs out.
I've got it.
I've spun it for a while and I've got it moving upward.
Let's see if we can get it the rest of the way out.
It's binding right at the end but not too bad.
It came out like two and a half inches and now it's binding right at the top.
Oh god it's so scary.
Bummer.
What happened?
So it broke here so the wedge is still down there.
Is this one of the holes that we're using?
Nope.
Okay good.
So we just patch and move on.
This yellow tape on here is one we're reusing so no big deal.
Good job.
It's nice to have a lot less crap up here.
Looks like Alonzo has a full battery on his hand drill.
Bobby's still pulling bolts out and Greg looks tired.
I'm so glad this is not up here anymore.
So how are you going to clean this up?
So I'm going to use this chisel to remove as much of the glue in as I can
and then I'm going to patch it.
All right so we're using some epoxy putty.
This is JB Weld Water Weld.
What is working really well is that it comes out a nice white color.
And here's some examples from the past.
That was a giant hole that somebody had tried to drill in and stopped.
And I'll show you how we've been doing it.
So you take off a chunk.
How much you think you'll need.
Put this away so it doesn't drop off the tower.
And definitely don't wear gloves so your fingers look like Bobby's.
We brought this over from the clip.
So what I've found to get a good texture and break up the white a little bit
is just sticking this in here.
Rolling around a little bit and then mixing like sugar cookies.
Yeah so mixing all of that sand in there and I might do it a little bit more.
So remains of the glue in right here and let's see if we have enough to do that patch.
So we blew it out really nicely so there's a good contact with the rock.
I think we'll need a little bit more.
What do you think Brian?
Yeah.
You don't want it to be a divot otherwise it looks like the hole is there.
So that's half of it and we'll fill in this half.
But that color looks really good.
Yeah it does.
And then I usually just sprinkle a little bit on there and then just kind of press it down
to give it a little bit more texture and then blow it off which nothing came out.
And that's we'll finish this little spot but that's basically it.
So let me show you what I got going on right here.
Alonzo or DeWalt whatever you want to call him.
He drilled in here.
This is actually really soft.
It just you can see it just comes apart.
I can grind this notch even deeper if I do that.
But we're trying to leave these as high as possible so there's plenty of room to clip
things and we're right next to each other.
Put a ton of thought into it so our master point would be right about here and the flatter
this surface is the less likely our master point is going to want to grind down when
we're bouncing and playing.
So the high line will be a little bit higher and then you can raise it up with a bag right
here making it a little bit more level because it is off level right now.
Our chains are going to be about probably right here with a repel ring so it's easier
to do a Tyrolian Traverse and hopefully eliminate all the tat that's up here which is just a
bunch of crap directly connected into the hangers.
It's like really, really, how are you doing Kyle?
I'm doing great.
Cameron, making progress?
Yeah, I am.
Cool.
So we're about, we're gluing right now and I want to show you this.
This is super important.
This is more important than cleaning your holes.
This is pure black epoxy and this is the white and this is just now coming out of the tube
and so you have to squirt out this first bit and we're going to squirt it into the bag.
The first bit doesn't have the hardener.
It doesn't have a hardener.
It's a safe saw.
Yeah, it never will cure.
So this will cure in here.
So always squeeze out a couple squirts into a bag or you know into something and so you
can make sure that you have the best epoxy that's going in the hole.
We're all set up and we've cleaned those and now I'm going to glue.
I'm going to make sure it's aiming the way I want and then I'll re-detail it.
That goes towards the line and that goes towards the line.
I'll detail a little bit more.
There's a q-tip in this case.
Really clean that spot.
That's that's a pretty clean bolt.
This one is wide because the hole is pretty wide.
This rock is really crumbly and this is really good that we're using glue and bolts because
even though I mean it takes a little bit of work to hammer through,
it's a lot softer than like say taff point that we did.
What Kyle is on over there is four glue and bolts that Jerry Mischewski and his team
installed for the 50 meter when they established it.
So that's already done.
We don't have to do anything for that.
This is so awesome.
So the bolt I'm on here and this bolt we are going to change to the fixed glue-ins.
These look like pretty strong bolts but the hangers are only 25 kilonewtons
and glue-ins would make everything the same and I like continuity for
rigging options in case you want to thread rope through there.
So we'll get a 40 to 50 kilonewton bolt to install on which is really nice when we're
going to try to use two here at the spire.
The idea is that you can use this repel rope in order to back up this master point.
This repel and those two repels that go down are all on climbing hangers
or you can use the tree that's up there.
It actually makes it easier to go up and down.
The bolts that are on this guy right here are so you can use an 80 meter I believe
in order to get down to the notch with one single rope.
70 or 80 meters.
But this way it's easier to get to the flake if you use the tree
because you're not jugging straight up that boulder but you stay in the gully.
Anyways this is the view directly below me.
I'm going to go back up.
We've got this all set up so now Bobby can start working on these bolts.
I guess Dean and company used a dull drill bit so the hole is not truly half inch
and he's still just binding up his drill bit down there before he gets to the bottom
of the hole which he still needs to drill deeper.
You can just see from here how much cleaner everything is not having the stuff in the middle.
These are our last two bolts to glue tonight and then we'll do a little bit more cleanup tomorrow.
I might actually get to highline on this trip.
So you probably can't see me.
The lights down there are beautiful but we just finished bolting the 110 foot side
so we can check our bolts tomorrow before we leave
because it's important to always make sure the stuff is right
and not just leave with fresh glue and bolts and no one's gonna mess with them tonight.
So tonight was worth staying up late and doing this.
See you tomorrow.
All right it's tomorrow and we're checking our glue.
Everything's solid.
The glue in the tube was solid.
These are bomber.
We filled one, two, three, four, five, six, seven holes and reused two of them.
There were nine holes in this area and now it looks a lot better.
Check out what I got.
This is my first power bolt that I ever removed and I didn't drop a single tool.
This is Dean's bolt and I'm back up here on the cliff.
We got all of it out and I think, where is he, Ryobi?
What's Craig's name?
Anyways, Craig is going down there and he's gonna make the hole a little bit bigger.
He's Makita.
I boshed it out of there and we're gonna stick in this giant ass glue in.
So we did.
We glued it in there.
Got lots of room to clip stuff and it's pretty much straight up and down.
If you just clip just this, it would just rub this.
If you went inside of the, this was a hole that I didn't notice before I patched it.
If you use that, it would actually rub and kind of grind.
Kind of like this is now.
I kind of like this because you can pad this well.
Anyways, you would still, in conjunction with that bolt, still use cams.
But that is super long and super solid and this is great glue.
I squeeze out lots of stuff.
So now this line is bummer.
And that's what it looks like if you go up.
So this is the anchor for the 50 meter.
And what you can do with this is you can rig off two bolts for main and two bolts for backup
or make a BFK like they did here.
You just have to make sure you pad it where it could possibly rub right there.
But yeah, so these are also fixed glue ins, which is really nice.
So everything's the same here at the Spire.
And the view is sick.
Okay, we're all de-rigged.
And it looks so good up here.
All that stuff is covered.
You can barely see where they were.
Two bolts work perfect for what we did before.
That was just splattered.
We did, I think, 20 or 25 holes up here.
I mean, you couldn't even sit.
Now you can sit in this nice flat spot here.
It's so nice.
And this can be used for either the climbers can use these or they can just flip the chains around.
Use them for that.
But otherwise, the chains, I'm going to rappel off here and do my carillon traverse over.
And that's nicer.
And that one bolt is bomber since it's only in cams.
And those bolts are awesome with a good rappel station.
Another cool thing after I put the rope in here is these are actually lined up perfectly with
the, uh, when you're jugging, when you fix the line for the next person.
So I tie in directly on one side.
I feed it through the rings, the grigger in here.
And then when I, my feet touch the wall, I just put my ascenders on and jug the rope.
And that's how I do the Tyrolean traverse.
Okay, okay.
Only one more shot of this area.
I'm just so excited to have metal.
Going over this really coarse granite, uh, super bomber.
And what's cool is you get this ledge to stand on.
And because they're over a little bit more, this is actually a lot easier for highline.
I get it on and off.
So you can use those ledges and then you have just the six bolts up here.
Nice and clean.
Oh, I just feel so much safer than the tap that used to be here.
And my setup, as I repel this strand, and then it feeds this one in,
which will not burn through these.
They rotate as people use them.
So they're unlikely to wear out anytime soon.
Now I'm done.
Look at all the goodies that we got.
Is that crazy?
How much crap is, was on there?
Like, I don't think there was a single good bolt.
Like even these came out pretty easy.
So we dealt with about 30 different holes here at the spire.
We reused four on the spire and then added two more and then plugged everything.
Over here on the 110 foot side, there were nine holes total.
I reused two of them and then, um, replaced Dean's bolt.
And there was a hole next to Dean's bolts.
That was another one that we plugged and filled all this random crap we saw over here
and then added a better repel station for the 50 meter line.
So around 30 holes that we plugged or reused or filled or whatever.
So this was really good that we cleaned all this up.
This was all paid for by Bobby and me and basically sponsored by you guys.
So if you can help donate to the channel, it really helps cover the cost of this.
It's quite a bit more than just the glue and the bolts we installed.
The tools are a lot.
We're going to replace a lot of stuff that we broke that belongs to us.
So this is an amazing group of guys right here and they are the reason we got all this done.
I'm Milwaukee.
Now it's just moshing people around over here.
So, uh, now when you come up to Los Aires fire, you won't see any rusty crap
that might be here blocking the view.
Thanks for watching.
Ciao.
Hi, Kyle.
How are you doing?
Happy birthday.
I'm having an amazing birthday today.
Good.