If you can't get new slings professionally replaced on your climbing cams, here are several ways you may, or may NOT want to DIY. Sewing a sling yourself: DO NOT DO THIS! Girth hitch: NOT recommended - Extra bad for cable, low results Basket hitch: Ok if you clip both strands - http://www.kakibusok.plus.com/Equipment/ReslingCams/Resling.htm Bowline on a bight: Ok but knot weakens slings Beer Knot: Ok - Bulky and remember water knots are sketchy https://youtu.be/mXe-8GmS08k 7mm Nylon cord: Meh - bulky and isn't stronger than a sling
00:00 Reslinging Cams 01:13 Different cam slings 03:06 When should you replace slings 04:16 Sewing 05:08 Basket and Girth Hitch 09:58 Chris's death products "tip" 11:46 Bowline on a bight 15:24 Quicklink 16:49 Accessory Cord 18:06 Webbing - water knot 19:22 Professional options 22:41 European law 23:48 Totem Trick 25:26 Or it's free
this is my number two Camelot from Black
Diamond and I found out that if I was in
Europe I could not get this resung by
any company but is not legal for them to
do so and I get asked all the time for
people who have a perfectly good cam on
how they could do this themselves so
let's talk about how not to DIY oh the
cam broke now there's nothing quite like
squeezing a new cam but an old cam can
be potentially super good enough from
here up this is all metal and plastic
components that technically will last
quite a while nothing's indefinite but
the sling here is only got a shell life
for about 10 years give or take how much
you use it if you're in a van lifer and
you're climbing every day and not
jealous then you might only get a year
out of that before it should be replaced
but if you left it in a closet like I
sometimes do for many years at a time
then you will get more life out of it
how much to say I don't know I'm not
going to tell you but at some point you
need to replace it and so we are going
to go into all the different ways that
you could do that yourself and whether
or not that's a good idea but first
let's look at the professional ways that
other cam companies do it so this is the
simplest sling you're going to find
where it just goes around the thumb Loop
and that's it and this is on the molus
cams it's on some of the alien cams and
sometimes when you have a hybrid where
you have this Lo bigger than the other
you could have a different color than
the thumb Loop which is nice and these
slings range from 15 mm down to 10ish if
you don't have any friends you probably
have this one and this sling uh you can
extend but you can see what's happening
at the thumb Loop where if you clip both
it's shorter but is that a problem and
these DMM dragonflies also have that
going on but these larger DMM cams the
dragons have a thumb stud that has the
sling sitting a lot nicer and black
diamond reinforces this area by folding
it over like that which helps it
interact better with the cable and this
is a hybrid where you have different
size loes up here and they have a split
color webbing which is pretty nice and
the ultral lights have a 14 mm webbing
the ultral light Camelot have a Dynamo
sling which makes them lighter and the
normal camel lots have an nlon sling
then we have our fancy totems and the
sling is sewn in such a way that it's
pulling on both sides evenly just
because the style of Cam that is and to
get that rung can only be done by totem
this one's 50% off because there's only
50% left but when we broke this one uh
you can see that it broke this stitching
here but then this ultimately failed
around the head and I just think that's
pretty cool now I'm always looking for
an excuse to do that and this has uh the
only one that has a cord that is tied
into this head and not down here there
just a plastic thumb Loop which is this
is a very clever way of saying don't
clip to that we have a whole video on
this and why this is the way it is so
who resing cams anyways how much does it
cost when should you do it and how could
you do it yourself are all questions
I've been getting for the last four
months while I've even been making the
episode trying to answer the people who
asked prior to that let's start with
when you should replace this is probably
when you're wondering if you should
replace it while making this video I've
looked at this and I go huh I wonder if
I should replace this yep now soft goods
have a lifespan of 10 years according to
the manufacturer and it all depends on
usage dyema has a shorter lifespan than
nylon though you don't want to ever push
the limit because we just did a video
where we tested webbing and tat it's
called that is permanently left around
trees typically for natural anchors
where you wrap plastic around things
natural anchors and the sun bleached
ones broke low enough that someone would
potentially die if they leaned back on a
single piece and it would break there's
actually been accidents where people
have passed away from such things so
this is too easy to fix once you watch
all the way through this episode and
it's actually not even expensive if you
have the ability to send it in which
that's what I would do with this
regardless of whatever best method we
discover I have been probably asked a
thousand times about people sewing their
own products please do not sew your own
sling onto a cam or SE anything you
depend your life on without a break test
machine to test every iter ation that
you do and get reliable results I have
built this entire thing based on me
trying to break test SE loops on my
slack lines and discovering how deep of
a rabbit hole that is there is a lot of
ways to do it wrong and I've actually
tested quite a few homes owned jobs
where things broke a lot lot lower than
they were expecting some would have
killed them if they actually used it and
some were okay and you don't know unless
you have a way to test it and no please
do not email me to ask me to test it for
you so if you can't sew your own
products what are your other methods
let's get into this and explore what you
can do I hate to disappoint you but I
really want to test like 30 plus tests
in this video to really make sure we
answer this and I'm not going to do that
with 30 cam I have the same cable that
goes in the thumb loops and I have a
bunch of the plastic tubing in order to
make half a cam that we can test over
and over to make sure this interacts
with the part I care about most of the
time it's going to break here we want
that to happen when you're done with
resling in your cams too you're not
crimping that right if it doesn't break
super good enough so I'm going to put a
basket which is a u-shape on the plastic
tubing on this part of the cable and the
goal so we're clear what the goal is is
that we want this to break around 15
kons so either the cable's going to
break from it pinching the sling or the
sling can break either one's okay as
long as it's like above 15 because your
cam is unlikely to get more than
that so that was disappointing what
that's not good I want to establish
whether or not this cable has potential
for more strength and so I'm going to
take a 1in two beer webbing I'm going to
tie a water knot on it we're going to
find out if we can get 15 out of this
cable
10 gosh darn it okay so our cable is the
weak not ideal but let's break this
one that is about 25% stronger 3.5 mm
slightly smaller uh still functional
it's half off now is that joke overused
yes we're going to see if this double up
zwn sling gives us a higher
[Music]
result who knew they knew what they were
doing yeah it still pulls through but a
higher Force since we have this what the
difference is between this doubled and
this side which is not
[Music]
doubled yeah that was lower the Black
Diamond Engineers knew what they were
doing when they did that doubled up
sling are they the only ones who do that
though as far as I'm aware yeah and
they've been doing it for a long time
now we can test another cable size uh
later but I want to know if girth
hitching m is worse for the
cable w
what that is
shocking wow well that's good to know
right cuz I didn't know that it was
trying to go from a girth hitch to what
looks like a square knot then it is
actually squeezing the crap out of that
so let's see what a single strand of
this does around the
cable uh that's higher this did not
break I want to go break a cam I want to
go I want to I mean need to go damn it
this revolution is a double and the
cable size seems to be a little bit
bigger Wild Country zero friends have an
extendable sling but that cable
definitely looks bigger this DMM
dragonfly also has one but it and it's
rated for nine the Wild Country friends
they have a extendable sling they're
rated for 10 I got some Flex cams up
here from trango ah they're rated for 12
so their dyema sling is a little bit WI
than my 8 and 1/2 Camp sling comes about
10.5 so with the plastic tubing it's
about 7 1/2 mm this plastic tubing is a
little under six so this cam is rated 12
kons so if this compromises that
strength we'll see less than 12
kons wow it melted the plastic being
like this is not compromising the
strength of this cam oh that's pretty
good yeah it's a pretty strong cam can
you basket a cam to reing it yourself
why don't we just do it to a cam and
find
[Music]
out I should be a detective if this
YouTube thing doesn't work out it broke
there go trango I mean that still feels
like new there's not significant damage
here it is pretty impressive I'll give
you that I'll give you that rated to 12
showing a lots of life after two bre
test okay so we could get 17 with a
basket and now we're getting nine with a
girth hitch I would girth hitch a dyous
sling on like a carabiner yeah but not
yeah a cable yeah that's surprising a
little more than half basket versus a
girth hitch and less than the rating of
the cam so people often wonder if drop
tests produce the same
results the girit sling
9.79 let's see he wanted to take an $8
sling and you just wanted to do this and
call it a day and your cam is rlung well
if you don't clip or if somebody's
cleaning and they don't clip both
strands your Cam's going to fall off now
there's a lot of things you can do on a
climb you shouldn't do or something will
go wrong but can you prevent that from
going wrong now Chris's death products
had a good tip this is 1 in tubular
webbing and we are going to basically
shove this down there
and this is a way to guarantee that no
one will ever climb with you again
because it looks sketchy but you and I
will know that it's fine just say the
guy from how not to told you that
Chris's death products told you this was
okay that does sound pretty bad now if
you think this is sketchy I've got
something better for you now this has a
23.2 7% chance of higher of actually
killing you because you might actually
think it's clipped right and you might
only be on one strand and then you take
a whipper on this oh but the guy from
how not to said that the Chris's death
products wasn't good enough you know in
my head this sounded fine but as I try
to
justify this taping a sling on here it's
just making it sound I just don't I
think that's fine you would look like a
dirt
bed maybe it's the look you're going for
so obviously a basket hitch is going to
be stronger than a girth hitch but I
didn't realize how much a girth hitch
was going to damage the cable so far
this hasn't broken but I can barely get
my thumb in there making this no fun to
use even though it still technically
works now if you don't like the idea of
trying to get a basket hitch to sit
nicely on a carabiner and you don't
accidentally clipped the wrong one how
about we try a bowan on a bite so the
benefit of a bowan on the bite is that
you're getting the basket benefit of
having two strands up here spreading out
the load and not pinching this cable but
a 6 the meter sling is too to long and
this would be hitting you in the ankles
so let's talk about your 30 cm sling
options Camp has an 8.5 and a 10.5 mm
option and you can see if you have a
little bit more width in the material
they don't need so much height in order
to have the stitching and if you're only
dealing with a short sling that is a lot
of stitching compared to this one okun's
o slings have two different sizes as
well this being 8 and this being 11 mm
and if you want some more width for the
cam that you're putting it on the 11 mm
might not be so bad considering the fact
that it's even cheaper than the 8 mm but
you can also see the benefit the green
one is about 1 metric inch shorter of
stitching so in this case I'm going to
pick this one I'm going to put on this
cam here to tie this start by putting
the stiff sewing part off to one side
you're going to go up your cam put a
little twist like so right there put
that down through there
and then this is going to go through
that hole and that is the way to do it
when you can't put the other end all the
way over the cam be sure to dress your
knot to look something like this and
these double strands right here on this
cable Pro to be pretty good on the Black
Diamond thing even though it's a little
bit more narrow now you want to keep the
sewn part off the very bottom where the
Carabiner will be pulling otherwise it's
going to do this and make a little wony
so now let's put this to the
test oo the broke not as high as I was
hoping this isn't the problem it's just
the fact that it's in a knot but the
condition of the cam is not too bad
let's try okun's 8 mm sling and just see
if we get anything wildely different on
the same Cam that we've got
here that's pretty good ooh I don't like
how that pinched that though but it did
break in the knot like it did last time
this cam is doing pretty good still but
since it's pinched let's go with a fresh
one and try with one of the camp
slings this one didn't pinch the cam too
badly but it also wasn't super duper
good enough I mean 10K in isn't that bad
it's just it'd be nice if we got the cam
to break
first that's funny both times the 8 mm
ones broke higher but it does kind of
pinch this a little bit more and of
course it broke in the knot I know we've
tried a lot of dyema Solutions in this
video so far so let's try a nylon one
let's see if I can get a Boling on a
bite I think the wider material is going
to simulate more of the sew and sling
that comes on a C4 but also nylon does
better in knots and this is also only
$6.95 so uh a super good enough solution
if we can get some good strength out of
this and I'm going to test this in a uh
cam we haven't pulled on yet as far as a
comparison to an actual sewn and sling
it's not too much longer but it is a
little bit more bulky right here but
it's not it's not too bad now this wider
stuff makes it harder to get a big eye
right here on the bulling of the bite so
let's just pull on that and see how it
does ironically similar to the 8.5 and 8
mm the cam is in a little bit better
shape but I don't know if it's worth
having such a bulky material that is
plenty of Boling on the bite stuff for
now uh another thing you could do is
take this aluminum quick link which is
pretty light at 18 G though the sling
itself is only about 11 and you could
put the sling directly on there in
theory if I closed to that you would get
possibly 22 kons out of at least the
sling but because that hangs awkwardly
low I'm going to double this up like
some of those extendable slings have and
that it it's still about twice as tall
as as the height right here which if
you're looking for that could work so
I'm going to tighten this up and we're
going to find out if we can get uh full
strength out of this cam with this
method well that's the MBS of a 7 mm
aluminum quicklink what's great is this
looks just fine not bad for how little
this thing is since we have this ling
let's just try it in a
basket hey the basket one and the cam
lost I'm not so convinced I like the
quick link method I'm still more of
maybe a Bast guy even though the bulling
on the bite turned out to be pretty good
now in theory you could always take a
quick link and you could hang it there
but it hangs pretty low and hits the
side of my knee so I'm not going to
chase that rabbit at this point now
what's interesting is no one except
totem will resling a totem so at the end
of this video I've got an idea I want to
test but before we get to that you can
see that the angel cam has a cord and so
is cord an option for your cam because
you can tie a knot and resling it it me
nuts that there was so little
information about accessory cord that we
broke over a 100 of our nylon and
polyester cords and you can find that on
our website 3 kons 4 mm is 6 kons 5 mm
is 10 kons 6 mm is 14 k now we were
using 8 mm wide dyam slings and so this
is only a 6 mm wide though fatter it
would that compromise the strength of
the cable because at some point I'm not
worried about the cord I'm now worried
about how it's interacting with the
cable itself but 7 mm in a loop breaks
almost at 21 kons since our traino cam
is so Burly maybe we can find out the
true MBS of this cable by putting a 7 mm
cord on it so that's roughly the right
length but it is quite a bit
bulkier oh the cam one it still
functions just fine but the loes are
getting mushroomed out a bit this is
kinked a little bit worse than it was
and this broke lower because it went
around a sharper Bend radius than the
previous test yes we've done I think the
theme of this video is I'm woefully
unimpressed with the numbers we're
getting I I don't really like how bulky
this is now people have asked can you
tie webbing in a water knot around cams
this is my first alien from a long time
ago and I use copper wire to replace the
triggers but I've also used webbing in
order to replace the sling now this is
916 webbing and the concern with a water
knot is well presented by Walter cert on
how they can come undone on a sharp edge
or pin of a rock or a tree and if it
moves then the end can be pulled easily
out even when it's
tied and the sling is open you could
potentially mitigate that risk with a
beer knot which we've made a video about
but I actually don't know how strong
916s webbing is on a cam because I made
this before I had a break test machine
but we can find
out
it broke the webbing about the same as
the dous Lings now 1in tubular webbing
is pretty bulky but I am curious what
it'll break
at oh the cam broke I know it's not a
big cam but I wasn't expecting that
webing seems okay but it was only up to
eight let's try this again with a bigger
cam still not that great the cam
survived this time but the the webbing
tore let's talk about how you can get
them rlung professionally and before we
talk about who does that let's talk
about how you might want to do that lots
of hugs and gratitude go a long way for
whoever is going to do it it is a
service companies try to offer to the
community they make zero doar doing it
please follow their instructions
carefully and don't send them things
that belong in the trash and just
understand that they are trying to help
you out instead of selling you a brand
new cam kind of like I'm doing in this
video I guess now expect to pay about
$20 in both directions for shipping and
no one's sitting around waiting to
resling your cams they have to do a
bunch of things that pay the light bill
and then they will get to it so it
typically takes a lot longer than you
would want it to now I did a lot of
research for this section of the video
so I give you the most accurate
information I can and I'm not going to
pretend I have it memorized uh few
manufacturers will replace slings but it
will be on their own cams which makes
sense so black diamond for $10 a cam
will resling Black Diamond cams now
Cedric has emailed me several times that
they can't get the Z or the X Series
cams reselling because their machine has
been busted for over a year and if they
get T many requests they will say it's
out of stock so they don't get swamped
by it when they stop reselling a cams I
get flooded with questions on how to DIY
it all of this information here will be
in the description with links to each
one molus will do it for $5 a cam and
clean and lube it up for molus cams
people say their cams look new when they
come back they've had the best reviews
that I've read so far DMM is in the UK
and will do it for only DMM products and
their lead time is whenever they have
time totem will service totem cams for
only 8 you just have to ship it all the
way to Spain and back and I wouldn't be
sending them cams you need in the next
month now Wild Country and trango do not
do their own cams when Wild Country
supposedly did their own cams and it was
past a safe age the rumor is online they
wouldn't even send the cams back to you
but I don't even think they do it at all
now and I found out no information if
fix in Spain will resling an alien cam
so the most reliable places that you're
most likely to get your cams rlung in
the United States are at these few
places runout Customs based around Moab
they have a 4 cam minimum $8.50 to $12
no International orders no totems and no
DMM dragons next is Mountain Tools in
Carmel California they'll do anything
except totems from $7.50 to $19 and
supposedly they are the least picky
about how your cams look they've been
around since the 80s and so has their
website Yates will do it for $6 it's the
official place for the DMM in Wild
Country but they'll do most cams also
not totems I don't know if Scott wants
me to say this but technically Scott wal
gear will probably do it if you ask real
nicely subject to change you just got to
recognize it's like a a total pain in
the ass right if you can find somebody
to do it be pretty grateful uh at an
average of $8 per Cam and a medium flat
rate box both ways $17 both ways six
cams will cost you 82 bucks that is the
price PR of one new cam so it can be
worth it however if you have six Tri
cams it only costs $160 to get a whole
new set versus 80ish to have the slings
replaced but that's up to you if that's
worth it now allegedly European law says
that PPE equipment cannot be altered by
the company who did not make
it pretty valid and technically the
original manufacturer can resling their
own cam but after 10 years I don't think
they're allowed to or no one pretty much
wants to now the 10-year rule is for
soft goods and if they won't touch it
after 10 years that is Technically when
that soft good needs to be replaced so
they're really not it's not it's not
helpful now if it's only going to cost
me 80 bucks to get a rack of cams reung
professionally and I just gave you a big
list of places that will do it if you
are in the states or fortunate enough to
be able to ship this somewhere that'll
do it I highly recommend it because it's
going to be better than any of the
solutions that I sort of solutions that
I presented to you now if you consider
the cost of the slings that I was
breaking on these cams even at $7 which
is a good price you might as well just
have it professionally done but that's
not always an option and so it's nice to
know what's safe and what's not and
girth hitching I don't think is a good
one but what are the options for the
totem because I don't think it would be
worth it to me to ship this all the way
back to Spain to get this rlung
depending how the next test goes so here
is a newi is totem but let's pretend
this is not what you want
anymore oh this is
terrible now the construction of a totem
is unique and the fact that this does
not go to the axle up here the axle has
nothing and the cables actually go into
the back of the loes so you need to be
pulling on both of these but not
squishing them together it's maybe not
the end of the world but you don't
really want to do that if you make this
more into to a w as you can see there
and you clip little half twist there
clip clip clip you've got to make sure
you clip all of these but I think that
is going to give us some pretty good
results now I've been wrong many times
in just this episode alone but you
definitely want to make sure that you're
clipping all of those strands because if
you don't clip all of them and you only
clip these it's going to come undone
like this come undone like that but I
think that'd be fairly obvious as you're
going up oh oo
10kn the sling is fine and we didn't
break the loop where it was touching the
sling so this broke in the back of that
lobe right there I really hope this
video was helpful for you guys if you
have a reslinging question because I
know a lot of people have had these
questions I wanted you to walk away with
something tangible and hopefully this
gives you peace of mind and saves you
money or both or neither and if you need
cams you can get that at how not to.com
we do ship the day you order it or your
order is free if you order in stock
items and you are in the United States
we want to make sure we are very
reliable if you're going to buy gear
from us we also put a lot of effort into
the Saturday email newsletter because we
post so much you might either miss
something or written form is sometimes
the better form for something we're
doing and there's no other way to let
you know we also do weekly giveaways on
that so please go sign up at howto.com
signup and if you want to go check out a
homemade Cam that we tested that was
pretty interesting and you can go check
that out next made in
America