We are supposed to clean holes we drill in rock before installing bolts. We already tested glue in bolts with epoxy and found it to be super strong enough. Now we are testing mechanical bolts in this video
Results: Our control and the three dirty holes all snapped the head of the bolt off showing the dust in the hole had no affect on the strength. Everything was above 30kn which is even higher than the climbtech hanger itself.
Conclusion: Please clean holes before installing bolts, but it's less of a big deal than we thought. Do quality work if you are installing something other people will depend their lives on!
Are dirty holes dangerous to stick your bolt shafts into?
I hope you appreciate the fact I'm not going further into this joke.
Basically, are wedge bolts dangerous if you don't clean the hole of all the dust
super well or at all in this case in this video?
This topic has been brought up many times because,
as we have learned in the Bolting Bible and every forum online,
cleaning your holes, glue or mechanical, is super important.
We're going to talk about dirty holes in this episode.
Enough of the damn intro.
Stay tuned.
Hi, I'm Bollie Hutton and I'm not going to melt this innuendo.
So this was actually, it's been requested by a few people,
but Mikey Schaefer requested this.
He's a guy who climbs real hard, much harder than I do,
and he puts in routes ground up and using a hand drill,
like 13, 14s, much harder than I can climb.
Without the top rope.
Yeah, without the line.
So scenario is you're climbing and then you get to a stance,
you're putting in the bolt and you have to hold that stance while you're drilling and...
Hand drilling.
On a 513 stance.
Yes.
And you don't want to take the time between taking the drill out
and maybe you're clipped to that drill,
taking that out and putting the bolt in
to stand there and brush the hole while you're holding a 513 stance.
And so he was curious if it makes a difference if the hole is not clean.
So this is our control.
We got a little ahead of ourselves installing this.
Otherwise, we'd show you how clean it is.
Just have to take a word for it.
The other holes are...
That is dirty.
Wow.
It feels so wrong, Bobby, just to be pounding that into such a dirty hole.
Yeah, let's see.
So these bolts that we're using are DeWalt Power Studs.
So this is a DeWalt Power Stud.
This is the original version.
It does not have any fancy numbers or letters at it like the DeWalt Power Stud SD6.
This is a bolt that I use most of the time.
This is a 3-eighths bolt.
All right.
Oh, stop.
Oh, I'm so glad those whole bags are there.
The bolt started to come out and then snapped.
This is here.
We have no idea where the actual head of the bolt is.
Clean hole control, 37 kilonewtons,
which is higher than what we expected with these bolts.
We've done some other tests that we will show here.
And...
What am I supposed to put in the corner, Bobby?
The bolts breaking in concrete.
Oh, yeah, yeah, yeah.
Gotcha.
All right.
We'll put that in the screen.
What are we testing now?
So we are testing dirty holes.
All right, let's start breaking them.
This is a dangerous one because it flies.
Stop.
Uh-oh.
It's the same result.
Where's our...
Where's the bolt?
So I'd like to note that all of these hangers we're using are,
I believe, 25 kilonewtons in BS.
That's a pretty good result.
Oh, yeah.
Whoa.
More than full strength.
Well, not technically.
The hanger is breaking.
This is a 25 kilonewton in BS Climtech hanger.
That's very warm.
Don't touch that.
Very disappointing.
We cannot validate the things we've been teaching in the Bolting Bible.
Similar results.
32.86.
So we teach in the Bolting Bible to properly clean your holes.
Today, though, we were unable to see why that's important with these bolts.
Also, with glue-ins, we've done some testing in dirty holes.
This video right here.
And with the glue that we use, the bolts that we use,
we have not seen that make a difference either.
We believe it affects lower grade glues such as polyester, maybe vinyl ester.
We have yet to see a situation where a dirty hole breaks any less than full strength.
I am still going to clean my holes because it's been so ingrained in me to do so.
And it is the proper thing.
And in the industrial world, they make a big deal about cleaning the holes.
And so I can't say not to do it.
It's just a lot of our bolt buster tests, we have not been able to prove why.
But if other people are going to depend their lives on something you're putting in,
just do it to the best standard you can possibly do it.
However, if somebody's putting in a 513 and scared out of their mind,
it's fine in that situation.
I'm not going to judge them.
I'm going to be very impressed that they did that on lead at all.
Because I can't even top rope a 511.
So while we're on the dirty hole topic,
the other kind of bolt that we like to use is these concrete screws.
Titan HD, Simpson HD, Strong Tie.
Yeah, it's a big name.
Anyways, links in the description below.
Most of our tests, the things that are holding the bolt buster hydraulic right now are these
because they're pretty damn strong.
And we tested some really thick hangers and they were snapping the heads off above 40
kilonewtons.
We really like them.
They're easy to take out when we're done doing things like this,
when we clean up and patch the whole area.
However, you don't want the dust at the bottom of the hole so much where you can't even put
the bolt in.
But as this grinds down the sides, it's kind of making more dust.
And so to sterilize a hole for this, it obviously isn't that important.
For the glue-ins, we've done a lot of testing today.
We've done a lot of tests.
Put in the comments below what you think.
We learn a lot from you guys.
Read the comments below because I'm sure you'll learn more than what you saw in this video.
Read the Bolting Bible if you want to see everything about bolting that I could find
on the internet.
We're going to have a lot in our 2021 version, which may or may not be out by the time this
video comes out.
That thing's taking me forever because everything in the Bolt Buster chart, everything we've
ever broken, we're putting in some really nice bite-sized content.
So it's easy for you to digest the whole thing in like 20 minutes.
Stuff that took us years to learn.
All the links for the resources we have, which are free, are going to be in the description
below.
And they all start with slackline.com slash something.
So if you just go to slackline.com, you'll find it all.
Thank you, Bobby, for donating your bolts so we could test this episode.
If you've made it all the way through all those plugs into the end of this episode,
you have won yourself a free subscription to this channel.
Just click that red subscribe button to redeem your prize.
This is a lot of work.
Click the like button.
Come on.
I appreciate it.
Cheers.
All right.
Hi, I'm Mike.
I got some bonus material.
So typically when we remove the bolts with a bolt puller, they break right at the neck
by the wedge.
So you can see the wedge here.
Typically they'll break right there.
All of the bolts that we pulled out today, they broke at the threads.
So they actually broke what the threads are.
So some major difference in breaking bolts.
Fun fact.