Building The "RD BONES" First ever bow drop | Shatterproof Archery

Kramer Ammons
208 followers
Today we build the Shatterproof Archery Bow "RD" Bones.
✅ Get your bow here:
https://www.shatterproofarchery.com/bows
✅ Get your Archery Glove here:
https://www.shatterproofarchery.com/
Handmade High-Quality Traditional Archery Gear
👉 https://www.shatterproofarchery.com/
Shatterproof Archery Amazon StoreFront
👉 https://geni.us/Shatterproofamazonshop
Shatterproof Archery Youtube Channel
👉https://www.youtube.com/c/ShatterproofArchery
#kramerammons
#bowmaking
#traditionalarchery
It's like one of my ultimate goals, to be able to have the shatterproof archery line
of bows.
A bow that I can do as a production bow that has the quality of a handmade bow.
So in between now and probably my projection, is actually three years.
You see the shop behind me?
This shop, I rented for one reason alone, and that is to build and sell bows.
Hey guys, I'm in the shop right now.
It feels kind of odd that at the age of 14, after making a few bows, I thought maybe one
day I'd be able to sell them.
And half my life later, we're about to sell them.
Now I'm walking out of the shop.
This is how we build the shatterproof archery reflex deflex longbow, aka RD Bones.
The goal is to make it simple, so I broke down the RD Bones bow building process into
five simple steps.
Step one, sourcing and preparing material.
Two, gluing up the material.
Three, shaping the handle, shaping the limbs, and installing tip overlays.
Four, tillering and final sanding.
Five, the touch mark, the spray finish, and packaging.
And then, it's on its way to you.
To get started, I'm going to show you a spontaneous gathering of Osage orange 600 miles from home.
When you're a scrappy though, you don't really need the right tools, but it sure would've
been nice on this trip.
And if I quit videoing, I could actually help balance it, but I'm videoing.
This is what we do to...
People don't know the behind the scenes for making bows.
Pulling you back down.
Wild Kramer, here comes the wood.
Have you ever realized how things never seem to quite go as planned?
So much so, that when they do, it actually feels kind of odd.
Right now, I'm here at the workshop before the guys have come in, and each day I like
to try to inspire and lead properly, and part of that is coming up and training them.
So I was really thinking of being shatterproof, kind of our motto.
What does that mean?
Being shatterproof is about the process of preparing to handle setbacks with unwavering
character.
That's what I want the team members to know.
As cheesy as it sounds, it's true.
If this dyslexic college dropout can figure out how to use a CNC machine and troubleshoot
it, you can do anything.
Step two, gluing all the material together.
Now remember, the bow is only as good as the form, the measurements, and the quality of
the glue up.
Kaz has become really good at gluing up bows, so he's going to walk us through this step.
This is where I get super, super pumped, because we're starting to see the bow's final shape.
After leaving the bow overnight in the heat box, we move on to step three.
Step three is all about shaping the handle, the limbs, and gluing on tip overlays.
This is where I start to get pumped, because you can start to see the bow actually coming
to its final shape.
All right, so that's basically 3A.
The main thing we have left to do in 3B, so to speak, is going to be to shape the handle
so it fits perfectly.
We did the rough shaping, we got that all taken care of, but now we have the final shaping
just so it fits so good.
And then secondly, we need to glue on the tip overlays.
Before that, we need to round the corners of the fiberglass, take off the tape, clean
everything up.
We're going to sand it all to 80 grit, and then we're going to do the tip overlays.
So let's get after it.
Step four.
It's time for tillering and final sanding.
Most tillering was done on my first 50 bows.
From all of those test bows, we know how measurements dialed in.
Tillering happens primarily pre-glue-up, but after glue-up, we'll shoot it, we'll test
it, we'll get the tiller right.
That way, every single one shoots as good as we can make it.
We've got the shape down, so now it's time to tiller the bow and do final sanding.
We should be pretty close on the tiller.
Just going to do a couple tweaks to dial it in.
Hey Kaz, you want to test this?
Sure.
It's gone.
How'd it feel?
Felt good.
Very smooth.
That was quiet.
Step five.
We will laser engrave the logo and the poundage on the bow.
We will finish the bow with multiple coats of high-impact, UV-protected, slightly textured
matte finish.
And finally, we'll package the bow and send it to you.
And now I'm out of the shop.
I've got one of the new RD bones we built today.
We've got a bunch of these made, but right now I'm going to test feet per second.
Go through this super quick.
We don't need to take much time on this.
The RD bones is now available.
The Reflex Deflex 58-inch longbow.
We've got 15 made that you can go buy.
We'll ship out tomorrow.
Or we've got a pre-order that you can kind of think of like a Kickstarter.
It's going to get us up and going selling bows.
We're going to leave this open until August 7th at midnight, so you can go order your
bow there.
The pre-order bows are $50 off, as well as you get a bowstring.
You get calf hair rest.
You get bowstring wax with every order.
We've got major other sales going on this weekend as well, like this brand new shatterproof
archery glove that is just absolutely sweet.
Look how slick this thing is.
Super easy to install.
This thing's amazing.
We're also going to give away two bows and 10 shatterproof archery hats for you guys
to enter.
All you have to do is order over $50 on the website.
All of that's going to go into a pool, everybody's name, and we're going to draw two of those
names and send two of you shatterproof archery bows and 10 of you shatterproof archery hats
if you place an order on the website.
What?
Am I doing it wrong?
No.
Just videoing.
What would you say?
Well, I would say, um, I don't know.
I feel like I've said this on 10 platforms.
Yeah.
You know?
Um, okay.
No.
The pre-order bows are first come first serve basis.
If you can't tell, I'm a little bit pumped up because I've spent so much time, we've
made like 50 of these things, dialing it in to make the bow.
I just decided to make the bow that I wanted to shoot, and these things are so smooth.
They're fast.
It's just a...
I like them.
I hope you like them too.
If you're interested, shatterproofarchery.com.
Thank you for your support.
Shatterproofarchery.com.
That's it.
We are...
