Bolt Buster - 6 TITANIUM glue in climbing bolts - break test in slow motion

HowNOT2
100 followers
9 Video Views·Dec 12, 2022
The Titan Eterna's shocked us that we got very similar results in both shear and tension when we did our break tests in granite with Hilti 500 v3 epoxy glue.
We got in shear 45.88KN, 51.32KN, and 44.88KN.
We got in tension 42.14KN, 42.10KN and 47.70KN
Titanium Bolts @ http://www.titanclimbing.com/
US distributor of Titan products @ https://www.rapbolting.com/product-category/titanium/
Hilti 500 v3 glue @ https://amzn.to/2TiU478
with Bobby Hutton
Highline University, Bolting Bible, Book of Slack... all the good stuff is at https://www.hownottohighline.com/
Do you want to see titanium bolts break in granite
on this episode of How Not to Bolt Bust?
Hi, I'm Ryan Jinks and welcome to my gear room.
Today, we are going to show you some of our favorite tests,
these titanium bolts that we did in granite
with Hilti V3 500 epoxy.
Basically, it's the best bolt and glue combo
that you can put in literally anywhere.
We are going to share in this episode tension and in shear
because our results were so similar.
Now, let me tell you a little bit about the titanium bolts.
These are from titanclimbing.com
and Martin Roberts is the guy who makes these.
He is also a bolting nerd like us,
but he really nerds out on titanium and knows his stuff.
These are the world's first certified titanium bolts
and they are proof tested to 12 kilonewtons
every single one of them.
Each bolt is stamped with a date
so it can be traced back to the original raw materials
that were used on it for absolute quality control.
And the MBS that's stamped on it is 30 kilonewtons
and the actual breaking strength we've got,
you'll see is much higher.
MBS is kind of a interesting thing
because some companies put their MBS
right at what they break at
and other people like Martin put it significantly lower
than what you can commonly get out of these.
MBS is minimum breaking strength.
So technically it's the lowest number you would ever get
when something breaks.
But as we have learned on Slack Snap and Bolt Busters,
it's not always the case.
And especially if you start using them obviously
outside of what they were intended for.
But they try to isolate variables when they do lab tests
and try to come up with MBS.
And I understand how you need to eliminate variables
to create standards.
So you can compare one product with a different product.
But this MBS is definitely lower
than what we were actually getting
here on our Bolt Buster tests.
A neat feature about these bolts
is when you hammer them in,
you can see how it gets a little bit wider here at the top.
And these go in 14 millimeter holes by the way.
Once it gets all the way in,
it gets pretty tight right here.
So if you're going to install these in a rock
that is slightly overhanging or completely overhanging,
that your bolt doesn't just fall out.
We actually had used some solid leg bolts one time
at just the slightest incline.
And it just wanted to slide out
and I was trying to duct tape it to sandstone,
it was awful.
It's really nice when you have
a little bit of an interference
when you're installing bolts
in case it's not perfectly this way
or like highlighting this way.
The wave bolts have some interference,
but there's like a lot of interference
and it's basically bending the bolt as you install it
and kind of twisting it because of the shape of it.
This has just enough interference to be useful.
Now let's talk about longevity.
These do not last forever.
They only last around 200 years.
We actually don't know how many hundreds of years
it'll last because well,
they haven't been around that long.
However, titanium is the right material to use,
especially when near the ocean
and any other area that is prone to corrosion.
There's been a lot of limestone near the ocean in Thailand
where stainless steel bolts have basically rusted through
in just a few years to the point of being quite dangerous.
And so this was actually the solution for mainly that,
but also other things around the world
where bolts are getting compromised pretty quickly
as stainless steel ones.
Zinc-plated bolts are shit
and basically for indoor climbing gyms.
You don't want to use them outside.
They will corrode pretty fast.
And especially if you mix it with a stainless steel washer,
hanger, bolt, like one of the components is stainless,
it'll corrode it even faster.
You can learn about all that stuff in the Bolting Bible
that we are currently,
Bobby and I are currently rewriting right now.
And we were kind of like mind fucked.
So we took a break and decided to film this one.
But anyways, check that out.
It's on slackademics.com right now.
I'm going to be moving it over to hownottohighline.com.
It's going to be revised
so it's climbing and Highline friendly
and you'll be able to read all the stuff
about bolts and how they work.
But these things will last a long, long time.
And that's what you want if you're going to put in
basically man-made shit in our beautiful outdoor nature
that we all share.
These bolts run around nine or 10 British pounds,
around 13 or 14 US dollars, and I think 10 or 11 euros.
They are a little bit more expensive than,
okay, so they're more expensive.
However, they feel like quality.
Something I like about these bolts
is the fact that it's a solid continuous rod
that goes all the way around
and that there's no structural welds
to try to bury under glue.
Now it is recommended these are installed with a notch.
A notch will prevent fatigue.
The closer this bolt is to the rock,
the less bending it will do.
So if the bolt is installed like this,
it will be a lot stiffer.
And over, we hope, 200 years that it lasts,
that if it's only in that far,
that it would bend, bend, bend, bend, bend,
creating this fatigue over time.
And we're not actually quite sure how long it would last.
We don't want to find out the hard way.
So it is recommended that it is notched
and it looks like that.
And that way it lasts possibly longer.
However, it's not super necessary.
And because we were only pulling once,
we did not, in this test, do any notches.
We will do a series of three in shear
in our next bolts breaks that we are gonna do
with a notch to see if it creates a difference
and to see how it breaks when it breaks.
So when we tested these in shear,
we got 45 kilonewtons, 51 kilonewtons, and 44 kilonewtons.
And it was pretty similar when we tested it in tension.
And we got 42 kilonewtons, 42 kilonewtons,
and 47 kilonewtons.
And rarely is the tension strength
the same as the shear strength.
And you can see in the break test
that the bolts bend quite a bit before they snap.
I have found that some products,
mostly soft goods, don't quite break at MBS
because if you use them a certain way,
it lowers the value.
And usually metal, it can only be used certain ways.
And so when you use them those ways, it should be the MBS.
Sometimes they're not, but this is consistently higher.
And I am pretty stoked on these.
So they're strong, they last a long time,
and they are nice to install and good quality.
You can see here that they come in two different lengths,
80 millimeters and 110 millimeters.
What we tested in the granite was 80 millimeters.
And as you can see, when this part is breaking,
it doesn't matter how long it is.
But if you're gonna do something in a softer rock
or a layered rock, you would wanna go with something longer.
Gives it a little bit more to grab onto.
But we did do quite a few tests in Moab
and did it in sandstone.
And we found that a lot,
I mean, it seems like it's softer rock,
but it was actually pretty good quality sandstone.
And our short bolts were breaking up here
and not coming out of the hole in a lot of situations.
Make sure you are following and liking our channel
because that way you can see those episodes
as they come out soon.
We just got back from Moab.
We'll be releasing that over time
and it'll all be on the Bolting Bible,
which will be eventually on hownottohighline.com.
One of the unique things about our Bolt Buster project
is it is completely an independent project.
Martin did not sponsor this video
with free bolts or money or anything like that.
We have purchased everything ourselves.
It is really nice when you guys donate
because it does come basically out of my pocket.
But I like being independent
and being able to shit on things I wanna shit on
and promote things that I like
just because I think they're great products.
But this is not just something
that I got free bolts or paid to do.
This is not sponsored.
Since Titan Climbing is based in the UK,
the rapbolting.com is the U.S. distributor for these bolts.
So if you're in the U.S.
and would like to purchase some titanium bolts,
Rap Bolting is your place to go.
Why are we doing Bolt Busters you ask
if all the bolts are breaking super good enough?
Well, it's because we as Highliners
did not know how strong bolts really were
and so we're putting in too many in my opinion
and we only need two or three
on either side of our Highlines.
I also am finding how little we actually know about bolts
as I dig deeper and deeper in my research.
We do know a lot but not enough in my opinion.
You can check out our other episode
where we show for five minutes
over 50 slow motion break tests
and you can learn how bolts break
which I think is super interesting
because you really learn a lot about the nature of them.
And when you see them out in the wild,
out on your climbing crags and your Highlines,
that you'd be able to predict how they would break
even though you might not know
exactly what the number might be
because a lot of things bend before they snap
and a lot of things snap where you're not expecting them.
Bolts just don't get pulled out of rocks
when you pull them hard enough
and that's what we're learning here at Bolt Busters.
We do want to promote that you do not bolt
if you do not have to.
You do get the same satisfaction as graffiti artists get
when you see your work on public land.
However, even though you will probably get that feeling
if you bolt, please don't do it for your ego.
Please make sure it's going to benefit our climbing crags
or our Highlines areas.
Otherwise put in removable bolts or rig all natural
or try to use as much trad gear as possible.
So we promote not bolting here at Bolt Busters
and on the Bolting Bible.
And if you are going to install bolts
and compromise rocks that have been there
for a long, long time until you showed up,
please put in something that'll last a long, long time.
So in five, 10 or 20 years,
we're not having to try to figure out
how to remove these and reinstall safer ones.
You can see how when we were angle grinding our bolts off,
how cool it was in slow motion
to film the sparks that were flying.
Titanium sparks a lot more than stainless steel does.
Now keep in mind that we go to areas
that are in the absolute middle of nowhere.
We are able to grind down flush with the rock,
put a little glue over the top dust
and make sure the areas that we test all this in
are left as good as we found them.
We hope by our efforts that less bolting
is done around the world and better bolting is done
so we don't have to replace them as often,
keeping our rocks that we do see more pristine.
If you want to help support this project,
go to brewjuno.com.
Started a coffee business with my friends.
We're making instant coffee taste really, really good
so it'll be really, really convenient.
Go support us by getting some coffee on brewjuno.com.
And make sure you head over to The Bolting Bible.
We are editing it right now.
It'll come out in about March, the 2020 version,
and we're gonna have about 50 more pages of content.
The 300 break tests that we have done
all charted out in an organized way
and updated with the most updated information
that we've been collecting for the last year
from people like you who give us tips
about things that you know about bolting.
So if you've got some pointers for us
for something that we can add to The Bolting Bible
to make it more accurate and more thorough
since it is a community-built project,
please let us know as soon as you can
because we want to include it in our March 2020 version.
And make sure you like, follow, and subscribe
on Instagram, Facebook, and YouTube
because we are posting all this stuff all the time.
Cheers.
Hey, thanks for watching, but don't be an idiot
and try highlining without going with somebody
who knows what they're doing the first time you go out.
We actually have available now
the Highline University International,
which is A to Z everything you need to know
before you go highlining.
This teaches you how to use a highline
that's already rigged.
So let's talk about some leash management.
That's the H0 course, which is out right now
and available at hownottohighline.com.
It's over 100 videos with quizzes, PDFs, illustrations,
and it comes with homework and teachers
that you submit it to.
It's a very interactive online school.
So you get to learn in person online.
